ETHERNET OVER COAX HIGHWIRE COAX to 500M | ETHERNET OVER COAX • Upgrade Analogue to IP Cameras - No Recabling

ETHERNET OVER COAX HIGHWIRE COAX to 500M | ETHERNET OVER COAX • Upgrade Analogue to IP Cameras - No Recabling

www.veracityglobal.com ETHERNET OVER COAX HIGHWIRE COAX TO 500M | ETHERNET OVER COAX • Upgrade analogue to IP cameras - no recabling. IP CA HIG IRE™ • Uses legacy coaxial cabling. ME HW RA ETHERNET VHW-HW • Supports HD and 4K IP cameras. VHW-HW DATA ONLY • Fully transparent full-duplex 100Base-TX. NETWORK SWITCH COAXIAL VIDEO CABLE • Easy to install - no IP address or other setup. 300M ON RG59 500M ON RG11 • 500m on RG11 or up to 300m on RG59. POWER LOW VOLTAGE LOW VOLTAGE POWER POWER • 12-40V DC or 24V AC power input. ETHERNET WITH POE ETHERNET DATA ONLY • Non POE, local power required at camera. PRODUCT CODE VHW-HW Unit Size L:104mm W:54mm H:24mm POWER SOURCES POE OVER COAX (BASE & CAMERA) HIGHWIRE POWERSTAR COAX TO 500M | ETHERNET & POE OVER COAX • Upgrade analogue to IP cameras - no recabling. HIGHWIRE • Same as HIGHWIRE with POE over coax. IP CA POWERSTAR™ • POE switch powers HIGHWIRE Base unit, ME RA POE VHW-HWPS-B VHW-HWPS-C HIGHWIRE Camera unit and IP Camera. POE POE OVER COAX • For maximum range & power Veracity’s 57V POE NETWORK SWITCH COAXIAL VIDEO CABLE DC PSU can be used as alternative to POE in. • Up to 25W POE to IP camera with 57V DC PSU. POWER (Optional POWER) 300M ON RG59 500M ON RG11 PRODUCT CODES • SAFEVIEW™ Instant LED status confirmation. ETHERNET WITH POE ETHERNET DATA ONLY Base VHW-HWPS-B Camera VHW-HWPS-C Unit Size L:104mm W:54mm H:24mm POWER SOURCE 2 PORT POE OVER COAX (CAMERA) HIGHWIRE POWERSTAR DUO COAX TO 500M | ETHERNET & POE OVER COAX • Replace 1 analogue camera with 2 IP cameras HIGHWIRE without recabling. POWER VPSU-57V-800 POWERSTAR • Combines standard HIGHWIRE with two-port SUPPLY CAM OPTIONAL 57V DC POWER VHW-HWPS-C2 ERA (recommended for DUO™ POE network switch. maximum power delivery) • No configuration required. 300M ON RG-59 500M ON RG-11 POE OVER COAX • Pairs with HIGHWIRE Powerstar Base unit. POE NETWORK SWITCH VHW-HWPS-B CAM • POE switch can power Base, Duo & IP cameras. ERA • SAFEVIEW™ Instant LED status confirmation. ETHERNET & OPTIONAL POE ETHERNET & POE PRODUCT CODE VHW-HWPS-C2 Unit Size L:132mm W:75mm H:22mm POWER SOURCES 4 PORT POE OVER COAX (CAMERA) HIGHWIRE POWERSTAR QUAD COAX TO 500M | ETHERNET & POE OVER COAX • Replace 1 analogue camera with up to 4 IP HIGHWIRE cameras without recabling. VPSU-57V-800 POWER IP CAMER POWERSTAR • Supports up to 4 HD IP cameras over SUPPLY A VHW-HWPS-C4 QUAD™ one coax link. IP CAMERA OPTIONAL 57V DC POWER VHW-HWPS-B (recommended for 300M ON RG-59 500M ON RG-11 • Pairs with HIGHWIRE Powerstar Base unit. maximum power delivery) POWER OVER COAX IP CAMER POE NETWORK • POE switch can power Base, Quad & IP cameras. A SWITCH • SAFEVIEW™ Instant LED status confirmation. IP CAMER A • No configuration required. ETHERNET & POE ETHERNET AND POE ETHERNET DATA ONLY ETHERNET AND POE PRODUCT CODE VHW-HWPS-C4 Unit Size L:132mm W:75mm H:22mm POWER SOURCES 4 PORT POE OVER COAX (BASE) HIGHWIRE POWERSTAR BASE 4 COAX TO 500M | ETHERNET & POE OVER COAX • Replaces typical 4 channel analogue video VHW-HWPS-C ETHERNET DATA ONLY CA ME HIGHWIRE encoders with Ethernet and POE for IP cameras. RA POWERSTAR • Ethernet and POE over coax. VHW-HWPS-B4 C AM NETWORK ER BASE 4™ • Re-uses existing coax. SWITCH A HIGHWIRE POWERSTAR BASE 4 • Fully automatic configuration. CA ME POWER RA • Gigabit Ethernet network uplink - SFP port COAX POWER SUPPLY CA ME for optional fibre uplink. RA VPSU-57V-1500 OR VPSU-57V-800 UP TO 300M ON RG59 / 500M ON RG11 ETHERNET & POE ETHERNET DATA ONLY ETHERNET & POE PRODUCT CODE VHW-HWPS-B4 Unit Size L:173mm W:110mm H:22mm POWER SOURCES 8 PORT POE OVER COAX (BASE) HIGHWIRE POWERSTAR BASE 8 COAX TO 500M | ETHERNET & POE OVER COAX CA ME • RA 8 channels per Base unit, up to 32Ch in 1U. VHW-HWPS-C ETHERNET & POE ETHERNET DATA ONLY CA ME HIGHWIRE • Full duplex 100Base-TX on each coax link. RA ETHERNET DATA ONLY CA POWERSTAR • Gigabit uplink port - fibre option via SFP socket. ME RA VHW-HWPS-B8 BASE 8™ • Only 1 main switch port needed per 8 channels. C AM NETWORK ER SWITCH A HIGHWIRE • POE or POE Plus per channel, on all channels. POWERSTAR BASE 8 CA ME RA • Up to 300m on RG59, 500m on RG11. POWER CA VPSU-57V-1500 ME • POWER RA Automatic configuration for simple installation. SUPPLY OR VPSU-57V-1U COAX CA UP TO 300M ON RG59 / 500M ON RG11 ME RA CA ME RA PRODUCT CODE VHW-HWPS-B8 Unit Size L:173mm W:110mm H:40mm POWER SOURCES ETHERNET & POE OFFICES | HQ PRESTWICK, UK | EDINBURGH | LEEDS | EUROPE | USA | MIDDLE EAST | INDIA 4 PORT POE OVER COAX (BASE) HIGHWIRE POWERSTAR BASE 4 LINKLOCK COAX TO 500M | TAMPER-PROOF POE OVER COAX • Tamper-proof Ethernet and POE over coax. HIGHWIRE • Relay contact alarm output on tamper, with POWERSTAR reset pins. BASE 4 LINKLOCK™ • Interference with cable shuts channel. • Re-uses existing coax cabling. • Fully automatic configuration. Simple installation. • Gigabit Ethernet network uplink - SFP port for optional fibre uplink. PRODUCT CODE VHW-HWPS-B4-LL Unit Size L:173mm W:110mm H:22mm POWER SOURCES 8 PORT POE OVER COAX (BASE) HIGHWIRE POWERSTAR BASE 8 LINKLOCK COAX TO 500M | TAMPER-PROOF POE OVER COAX CA ME RA • Tamper-proof Ethernet and POE over coax. VHW-HWPS-C CA ME RA ALL HIGHWIRE • 8 Tamper-proof channels per Base unit. ETHERNET DATA ONLY ALL CA ME RA POWERSTAR • Relay contact alarm output on tamper, with VHW-HWPS-B8 INTERNAL W C EXTERNAL W AM NETWORK ER BASE 8 LINKLOCK™ reset pins. Interference with cable shuts channel. SWITCH A HIGHWIRE POWERSTAR BASE 8 POWER CA ME • Gigabit uplink port - fibre option via SFP socket. RA POWER SUPPLY C AM • Fully automatic configuration. Simple installation. ER VPSU-57V-1500 LINKLOCK A OR VPSU-57V-1U OUTPUT PINS INPUT COAX ALARM CA • Full-duplex 100Base-TX on each coax. ME RA / INTERNAL LAN LINKLOCK ™ BOUNDARY PROTECTED ARM RESET NO COM NC CA ME UP TO 300M ON RG59 / 500M ON RG11 ETHERNET & POE RA LINKLOCK PINS ETHERNET & POE ETHERNET DATA ONLY PRODUCT CODE VHW-HWPS-B8-LL Unit Size L:173mm W:110mm H:40mm POWER SOURCES LONG RANGE POE OVER COAX HIGHWIRE LONGSTAR CAT5/6 | 100BASE-TX TO 1400M | LAN & POE • Long range Ethernet and POE over coax cable. VPSU-57V-800 • HIGHWIRE Fully automatic. Simple installation. POWER SUPPLY OPTIONAL CA LONGSTAR™ • Unrestricted 100Base-TX and POE over ME R 57V DC POWER A VLS-1P-BC VLS-1P-CC OR VERACITY 1U RACKMOUNT 1400m (4,600ft) on RG11. POWER SYSTEM VPSU-57V-1U UP TO 1400M ON COAX ETHERNET & POE HIGHWIRE HIGHWIRE LONGSTAR LONGSTAR • Ruggedised, extreme temperature range. POE NETWORK SWITCH POE OVER COAX • BS EN 50121-4 compliant (rail and metro). BASE UNIT CAMERA UNIT OPTIONAL VLS-1U ETHERNET AND • Note: LONGSTAR is not compatible with the RACK MOUNTING BRACKET OPTIONAL POE (24 CHANNELS IN 1U) PRODUCT CODES HIGHWIRE Powerstar range. ETHERNET WITH POE ETHERNET DATA ONLY Base VLS-1P-BC Camera VLS-1P-CC Unit Size L:115mm W:55mm H:27mm POWER SOURCES OR POE POWERED LONG RANGE ETHERNET OVER COAX HIGHWIRE LONGSTAR LITE CAT5/6 | 100BASE-TX TO 1400M | LAN • Long range Ethernet over coax cable. HIGHWIRE • Fully automatic. Simple installation. VPSU-12V-U POWER SUPPLY C AM LONGSTAR LITE™ • Unrestricted 100Base-TX over 1400m ER 12V DC POWER A VLS-1N-LC VLS-1N-LC (4,600ft) on RG11. UP TO 1400M ON COAX ETHERNET HIGHWIRE HIGHWIRE LONGSTAR LONGSTAR • Ruggedised, extreme temperature range. NETWORK SWITCH ETHERNET OVER COAX • BS EN 50121-4 compliant (rail and metro). BASE UNIT CAMERA UNIT VPSU-12V-U POWER SUPPLY • Up to 4.2km (2.5 miles) data-only link at ETHERNET 12V DC POWER 10Base-T. ETHERNET WITH POE ETHERNET DATA ONLY PRODUCT CODE VLS-1N-LC (Non POE) Unit Size L:115mm W:55mm H:27mm POWER SOURCES POE OVER COAX BUNDLE HIGHWIRE ENCODER REPLACEMENT KIT COAX TO 500M | ETHERNET OVER COAX • Kit comes with HIGHWIRE Base 4, four VHW-HWPS-C ETHERNET DATA ONLY CA ME HIGHWIRE™ HIGHWIRE Powerstar (camera) devices and RA ENCODER a 1500mA 57V power supply and power cord. VHW-HWPS-B4 C AM NETWORK ER • SWITCH A REPLACEMENT KIT Fully automatic configuration. HIGHWIRE POWERSTAR BASE 4 • CA Replaces typical analogue video encoders ME POWER RA COAX with Ethernet and POE over coax re-using POWER SUPPLY CA ME existing coax for IP cameras. RA VPSU-57V-1500 UP TO 300M ON RG59 / 500M ON RG11 PRODUCT CODES ETHERNET & POE ETHERNET DATA ONLY ETHERNET & POE VHW-HWPS-ERK4-UK or EU or US Base Unit Size L:173mm W:110mm H:22mm POWER SOURCE | 57V 1500mA INCLUDED IN BUNDLE COMPACT POE OVER COAX (CAMERA) HIGHWIRE BACKBOX COAX TO 500M | ETHERNET OVER COAX • Upgrade analogue to IP cameras - no re-cabling. HIGHWIRE • Compact unit for inside cameras housings. POE IP CAM • Flexible leads - easy connection in small space. VHW-HWPS-B ERA POWERSTAR BACKBO POE OVER COAX X POE NETWORK POE • Reliably power POE Plus cameras up to 25W. V BACKBOX™ SWITCH COAX VIDEO CABLE HW-H WPS -CBB • SAFEVIEW™ checks connection + power status. POWER 300M ON RG59 500M ON RG11 POWER • Compatible with VHW-HWPS Base units. SUPPLY (Optional Power) • Full 100Base-TX Ethernet performance. ETHERNET WITH POE POE OVER COAX Unit Size L:84mm W:62mm H:24mm PRODUCT CODE VHW-HWPS-CBB Lead Length: 150mm POWER SOURCE | POE POWERED POWER SOURCES 57V 800mA 57V 1500mA 57V 1U RACK 8800mA 12V UNIVERSAL POWER SUPPLY 24V RMPSU ETHERNET & POE EXTENDER OUTREACH MAX CAT5/6 | 100M EXTENSION PER UNIT | LAN & POE • Extends Cat5/6 Ethernet by 100 metres.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    8 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us