Eaton® Intelligent Power® Manager (IPM) User’s Guide Eaton is a registered trademarks of Eaton Corporation or its subsidiaries and affiliates. Google Chrome is a trademark of Google, Inc. HyperTerminal is a registered trademark of Hilgraeve. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. Microsoft, Internet Explorer, Vista, and Windows are registered trademarks of Microsoft Corporation in the United States and other countries. Mozilla and Firefox are registered trademarks of the Mozilla Foundation. National Electrical Code and NEC are registered trademarks of National Fire Protection Association, Inc. Phillips is a registered trademark of Phillips Screw Company. All other trademarks are property of their respective companies. ©Copyright 2013 Eaton Corporation, Raleigh NC, USA. All rights reserved. No part of this document may be reproduced in any way without the express written approval of Eaton Corporation. Class A EMC Statements FCC Information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ICES-003 This Class A Interference Causing Equipment meets all requirements of the Canadian Interference Causing Equipment Regulations ICES-003. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Eaton is not responsible for damage to this product resulting from accident, disaster, misuse, abuse, non-Eaton modification of the product, or other events outside the reasonable control of Eaton or not arising under normal operating conditions. 1F61 I.T.E. Special Symbols The following are examples of symbols used on the UPS or accessories to alert you to important information: RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of electric shock symbol. CAUTION: REFER TO OPERATOR'S MANUAL - Refer to your operator's manual for additional information, such as important operating and maintenance instructions. This symbol indicates that you should not discard waste electrical or electronic equipment (WEEE) in the trash. For proper disposal, contact your local recycling/reuse or hazardous waste center. Table of Contents 1 INTRODUCTION . 1 Compatibility . 2 Eaton Devices . 2 Serial Line Devices . 3 Other Network Devices. 4 Eaton IPP Management. 4 Performance Evaluations . 4 Network Ports . 5 Troubleshooting . 6 Terms. 6 Acknowledgements. 6 Java Licensing . 7 2 INSTALLATION. 9 Installation Prerequisites . 9 On the System Hosting Eaton IPM . 9 On the System that Displays the Web-based GUI . 9 JRE Prerequisites . 10 JRE Installation . 10 Quick Start Instructions . 10 Graphical Installation . 10 Configuration . 11 License Code. 13 Operation. 13 Installation Result . 14 Uninstalling the Eaton IPM . 15 Upgrading the Eaton IPM Product . 15 Installing/Uninstalling the Eaton IPM (Command Line) . 15 JRE Installation . 15 . 15 3 CONFIGURATION . 17 Configure Nodes . 17 Discover Nodes Connected on the Network . 17 Quick Scan . 18 Range Scan . 18 Address Scan . 19 Scan Settings for Discovery . .20 Change driver node . 21 Configure Node Settings . 22 Configure Actions . 23 E-mail Notification Actions . 25 Execute Script/Program Actions . 25 Alarm Box Notification Actions . .26 Configure User Accounts. 27 System Settings . 29 Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2 i Table of Contents Automatic Data Purge . 30 Manage the Cisco UCS Manager Component. 30 Enabling the Component. .30 Add the Component . 30 Remove the Component . 32 Edit a Component . 33 Configure the Cisco UCS Manager Component . 34 Difference Between “Present” and “Future” Options. ..