® TECHNICAL DATA FUNCTIONAL FILLERS AND EXTENDERS FEATURES AND BENEFITS MINEX® micronized functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when MINEX is used in interior paint formulations. MINEX is easily dispersed in all conventional vehicle systems, and low oil absorption permits high loadings in adhesives, sealants, and aqueous and alkyd based paints. Multiple grades are available to provide optimal performance in a variety of applications. While the preferred MINEX product is application dependent, coarser grades offer cost effective gloss and sheen control and can add texture. The intermediate grade MINEX 4 offers application versatility for a wide range of architectural and industrial uses. Finer MINEX grades are preferred for higher gloss coatings and are also the preferred choice for powder and clear paint systems. MINEX® fillers are produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. Automated scanning electron microscopy confirms that MINEX contains less than one-tenth of one percent crystalline silica. No free crystalline silica is detectable in the mineral complex. All MINEX grades SM are processed and sized with rigid adherence to UNIMIN's QIP quality assurance programs. Consistently uniform chemistries, size distributions, and top size controls ensure improved structural and chemical performance with minimal resin demand. PARTICLE SIZE ANALYSIS AND PROPERTIES MICRONIZED GRADES Mean Values. These Do Not Represent A Specification. Microns 2 3 4 7 10 106 100.0 100.0 --- --- --- 75 99.8 99.2 100.0 --- --- % Finer 45 95.5 98.2 99.8 100.0 100.0 (Sedigraph) 20 69.2 77.7 91.6 99.3 99.5 16 57.1 67.9 85.2 98.2 99.3 10 39.2 48.5 62.5 89.1 96.9 5 21.3 26.0 34.5 55.0 81.0 Median Particle Size Sedigraph 13.6 11.0 7.6 3.5 2.6 Hegman Value ASTM D1210-79 N/A N/A 4.6 5.8 6.4 Specific Surface Area (m2/g) BET 1.0 1.5 2.2 3.6 4.9 Brightness Tappi 85.5 88.0 88.7 90.0 90.5 Moisture % ASTM C-566 0.09 0.09 0.10 0.16 0.18 Oil Absorption ASTM D-281 26.5 27.0 30.0 33.0 35.0 pH AFS 113-87-S 10.3 10.3 10.4 10.4 10.5 Weight Per Solid Gallon (lbs.) 21.7 ASTM D-153 Bulking Value 0.0459 ASTM C-29 Refractive Index 1.51-1.53 ASTM D-801 Specific Resistance (ohm-cm) 3000 ASTM D-2448 Hardness 6.0 Moh’s Scale ® TECHNICAL DATA FUNCTIONAL FILLERS AND EXTENDERS CHEMICAL ANALYSIS Mean Values. These Do Not Represent A Specification. Mean Percent by Weight Silicon Dioxide (SiO2) 60.20 Aluminum Oxide (Al2O3) 23.60 Sodium Oxide (Na2O) 10.50 Potassium Oxide (K2O) 4.80 Calcium Oxide (CaO) 0.35 Iron Oxide (Fe2O3) 0.08 Magnesium Oxide (MgO) 0.02 Loss on Ignition (L.O.I.) 0.42 These oxides exist in a complex of Albite, Microcline, and Nepheline. There is no free crystalline silica present. ORDERING INFORMATION Shipping Point: NEPHTON/BLUE MOUNTAIN, ONTARIO ORIGINATING CARRIER: CANADIAN PACIFIC (CP RAIL) Availability: 50 LB. BAGS, 25 KG BAGS, INTERMEDIATE BULK BAGS AND BULK TRUCK AND RAIL FOR PRODUCT INFORMATION AND CUSTOMER SERVICE: U.S. and CANADA 800-243-9004 • FAX 800-243-9005 WORLDWIDE 203-442-2500 • FAX 203-972-1378 Silica Sands • Ground Silica • Feldspar • Ball Clay • Kaolin • Nepheline Syenite • High Purity Quartz • Olivine • Microcrystalline Silica • Hydrated Lime GRADE NUMBERS INDICATE RELATIVE VALUES OR RESULTS. THEY ARE NOT A SPECIFICATION OR WARRANTY OF PERFORMANCE. HEALTH HAZARD WARNING: Prolonged inhalation of dust associated with the materials described in this data sheet can cause delayed lung injury. Avoid creating dust when handling, using or storing. Follow OSHA Safety and Health Standards for fugitive dust. Current Material Safety Data Sheet containing safety information is available and should be consulted before usage. Notice: While information contained herein is correct to the best of our knowledge, Unimin Corporation hereby disclaims any warranties as to the accuracy of the same. Recommendations or suggestions are made without guarantee or representation as to result, since conditions of use are beyond our control. All materials are sold to Unimin Corporation standard terms and conditions of sale and on the condition that buyer shall make his own tests to determine the suitability of such product for buyer’s purpose. No statement contained herein shall be construed as a recommendation to infringe any patent. Nepheline Syenite Containing MINEX® is a registered trademark of UNIMIN Corporation or its subsidiaries. All rights reserved. NEPHTON - MINEX FF (03/14) .