.70-741.IT Study Materials & Practical QAs 283 T Study Materials & Practical QAs Vendor: Microsoft Exam Code: 70-741 Exam Name: Networking with Windows Server 2016 Version: 21 T Study Materials & Practical QAs .70-741.IT Study Materials & Practical QAs284 T Study Materials & Practical QAs T Study Materials & Practical QAs T Study Materials & Practical QAs T Study Materials & Practical QAs .70-741.IT Study Materials & Practical QAs284 Exam A QUESTION 1 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. T All client computers run Windows 10 and are configured asStudy DHCP clients. Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer. You open the DHCP console as shown in the exhibit. (Click the Exhibit button.) Materials & Practical QAs You need to ensure that all of the Windows a DHCP lease. Solution: You activate the scope. T Study Materials & Practical QAs .70-741.IT Study Materials & Practical QAs284 T Study Materials & Practical QAs Does this meet the goal? A. Yes B. No Correct Answer: A Section: (none) Explanation T Explanation/Reference: Explanation: Study When a scope is deactivated all statistics display 0. You only can tell if a scope is configured after you click on address pool. Activating the scope will be sufficient. QUESTION 2 Materials Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10. On Server1, you have the following zone configuration. & Practical QAs You have the following subnets defined on Server1. T Study Materials & Practical QAs .70-741.IT Study Materials & Practical QAs284 T Study Materials & Practical QAs You need to prevent Server1 from resolving queries fromT DNS clients located on Subnet4. Study Server1 must resolve queries from all other DNS clients. Solution: From Windows Firewall with Advanced Security on Server1, you create an inbound rule. Does this meet the goal? Materials A. Yes B. No Correct Answer: A Section: (none) Explanation & Explanation/Reference: Explanation: Practical In firewall u can add inbound rule and specify UDP, TCP ports and IP subnet to block list, so the answer is YES. https://technet.microsoft.com/en-us/library/dd421709(v=ws.10).aspx We can create a firewall rule to block access to the DNS Server service and restrict the rule to remote computers on subnet4. QUESTION 3 Note: This question is part of a series of questions that present the same scenario. Each questionQAs in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days. All client computers dynamically register their names in the contoso.com DNS zone on Server1. You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved. T Study Materials & Practical QAs .70-741.IT Study Materials & Practical QAs284 T Study Materials & Practical QAs You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days. Solution: You run the dnscmd.exe command and specify the /AgeAllRecords parameter for the zone. Does this meet the goal? A. Yes B. No Correct Answer: B Section: (none) T Explanation Study Explanation/Reference: Explanation: https://technet.microsoft.com/en-us/library/cc772069(v=ws.11).aspx Materials Explanaon: The queson states that automac scavenging of stale records is enabled. Automac scavenging of stale records is a server seng. To ensure that zone data is processed by this feature, we have to configure Aging for the zone. Per default Zone Aging is disabled. Dnscmd /ageallrecords sets the current me on a me stamp on resource records at a specified zone or node on a DNS server. The ageallrecords command is for backward compability between the current version of DNS and previous releases of DNS in which aging and scavenging were not supported. It adds a me stamp with the current me to resource records that do not have a me stamp, and it sets the current me on resource records that do have a me stamp. Record scavenging does not occur unless the records are me stamped. & Client computers which dynamically register their names maintain a mestamp per default. Names that are Practicalmanually added are marked as stac. QUESTION 4 Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question. QAs You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address. Each network card connects to a different network segment. Server1 has an IPv4 scope named Scope1. You need to ensure that Server1 only uses one network card when leasing IP addresses in Scope1. What should you do? A. From the properties of Scope1, modify the Conflict detection attempts setting. T Study Materials & Practical QAs .70-741.IT Study Materials & Practical QAs284 T Study Materials & Practical QAs B. From the properties of Scope1, configure Name Protection. C. From the properties of IPv4, configure the bindings. D. From IPv4, create a new filter. E. From the properties of Scope1, create an exclusion range. F. From IPv4, run the DHCP Policy Configuration Wizard. G. From Control Panel, modify the properties of Ethernet. H. From Scope1, create a reservation. Correct Answer: C T Section: (none) Study Explanation Explanation/Reference: Explanaon: Materials A computer running a Windows Server operang system can perform as a mulhomed DHCP server. For mulhomed servers, the DHCP service binds to the first IP address stacally configured for each network connecon in use. By default, the service bindings depend on whether the first network connecon is configured dynamically or stacally for TCP/IP. Based on the method of configuraon it uses, reflected by its current sengs in Internet Protocol (TCP/IP) properes, the DHCP Server service performs default service bindings as follows: If the first network connecon uses a manually specified IP address, the connecon is enabled in server bindings. For this to occur, a value for IP address must be configured and the Use the following IP address& opon selected in Internet Protocol (TCP/IP) properes. In this mode, the DHCP server listens for and provides service to DHCPPractical clients. If the first network connecon uses an IP address configured dynamically, the connecon is disabled in server bindings. This occurs when the Obtain an IP address automacally opon is selected in Internet Protocol (TCP/IP) properes. For computers running Windows Server operang systems, this is the default seng. In this mode, the DHCP server does not listen for and provide service to DHCP clients unl a stac IP address is configured. The DHCP server will bind to the first stac IP address configured on each adapter. By design, DHCP server bindings are enabled and disabled on a per-connecon, not per-address basis.QAs All bindings are based on the first configured IP address for each connecon appearing in the Network Connecons folder. If addional stac IP addresses (for example, as set in Advanced TCP/IP properes) are configured for the applicable connecon, these addresses are never used by DHCP servers running Windows Server and are inconsequenal for server bindings. DHCP servers running Windows Server never bind to any of the NDISWAN or DHCP-enabled interfaces used on the server. These interfaces are not displayed in the DHCP console under the current server bindings list because they are never used for DHCP service. Only addional network connecons that have a primary stac IP address configured can appear in the server bindings list (or be selecvely enabled or disabled there). T Study Materials & Practical QAs .70-741.IT Study Materials & Practical QAs284 T Study Materials & Practical QAs T Study Materials & Practical QAs QUESTION 5 Note: This queson is part of a series of quesons that present the same scenario. Each queson in the series contains a unique soluon that might meet the stated goals. Some queson sets might have more than one correct soluon, while others might not have a correct soluon. T Study Materials & Practical QAs .70-741.IT Study Materials & Practical QAs284 T Study Materials & Practical QAs You network contains an Acve Directory domain named contoso.com.