Accreditation Procedures GAC 10.16 Scope of Accreditation ACCREDITED Issue No: 3/ Issue Date: 08-04-2020 Accreditation Manager: Hamza Khan PRODUCT CERTIFICATION ISO/IEC 17065:2012 No. APC 0043 Product Certification Body Accreditation No. APC 0043 is accredited by the GCC Accreditation Center (GAC) in accordance with the recognized International Standard ISO/IEC 17065:2012, “Conformity assessment - Requirements for bodies certifying products, processes and services” INTERTEK TESTING SERVICES (SOUTH AFRICA) (PTY) LTD. – Certification body Contact: Mr. Deon Kok Address: First Floor, Building D, Stoneridge Office Park Tel: +27 10 500 9821 Ext 7001017 8 Greenstone Place, Greenstone Email: +971 505 673 264 Web Address: www.intertek.com/government Gauteng, South Africa Locations where certification activities covered by the above Accreditation Standard are undertaken 1- address First Floor, Building D, Stoneridge Office Park, 8 Greenstone Place, Greenstone Gauteng, South Africa For the following scope: Version: 1.1 Page 1 of 45 Date: 11th December 2019 Approved by: Atta Subhan Accreditation Procedures GAC 10.16 Scope of Accreditation ACCREDITED Issue No: 3/ Issue Date: 08-04-2020 Accreditation Manager: Hamza Khan PRODUCT CERTIFICATION ISO/IEC 17065:2012 No. APC 0043 Scope: 40. Product Certification: 40.01 Product Certification Scope details are as follows: Specific Schemes: SAUDI PRODUCT SAFETY CERTIFICATION SCHEME Specification, Standard Remarks Product Category Items, Materials Or Products Method Or Technique (if any) Used TECHNICAL REGULATION NO. MA-156-16-03-01 Building Materials - Part I: Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars and tubes and ISO 6363 Metals and their Alloys for wires constructions and buildings Aluminium and aluminium alloys -- Chemical composition ISO 209 Aluminium and aluminium alloys products for building purposes part 1 rode / bars, SASO 79 tubes and profiles Wrought aluminium and aluminium alloys for building purposes part 2 : sheets , SASO 1759 strips and plates Execution of steel structures and aluminum structures. Requirements for EN 1090-1 conformity assessment of structural components Aluminum and aluminum alloys. Tread plate. Specifications EN 1386 Version: 1.1 Page 2 of 45 Date: 11th December 2019 Approved by: Atta Subhan Accreditation Procedures GAC 10.16 Scope of Accreditation ACCREDITED Issue No: 3/ Issue Date: 08-04-2020 Accreditation Manager: Hamza Khan PRODUCT CERTIFICATION ISO/IEC 17065:2012 No. APC 0043 Aluminum and aluminum alloys. Extruded precision profiles in alloys EN AW-6060 EN 12020-2 and EN AW-6063. Tolerances on dimensions and form Aluminum and aluminum alloys. Sheet, strip and plate. Mechanical properties EN 485-2 Wrought aluminum and aluminum alloy extruded rods/bars, tubes and profiles -- ISO 6362-2 Part 2: Mechanical properties Grey cast iron pressure pipes SASO 77 Cast iron drainage pipes and fittings spigot series (hubless) under ground SASO 882/GSO 510/GSO 515 Cast iron sanitary pipes and fittings for waste water and ventilation SASO 827/ GSO 460 Socket and spigot ductile cast iron pipes for pressure pipelines SASO 1014 Ductile cast iron pipes fittings and accessories for pressure pipelines -general SASO 1020 requirements Cast iron drainage pipes and fittings -- Spigot series ISO 6594 Petroleum and natural gas industries -- Steel drill pipe ISO 11961 Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe ISO 16172 Petroleum and natural gas industries -- Steel pipe for pipeline transportation ISO 3183 systems Steel pipes and fittings for buried or submerged pipe lines -- External and internal ISO 5256 coating by bitumen or coal tar derived materials Cold-formed welded structural hollow sections of non-alloy and fine grain steels -- ISO 10799-1 Part 1: Technical delivery conditions Cold-formed welded structural hollow sections of non-alloy and fine grain steels -- ISO 10799-2 Part 2: Dimensions and sectional properties Hot rolled products of structural steels. General technical delivery conditions EN 10025-1 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion EN 10088-4 resisting steels for construction purposes Steel for the reinforcement of concrete. Weldable reinforcing steel. General EN 10080 Steel wire and wire products for fences. Zinc and zinc alloy coated steel barbed wire EN 10223-1 Version: 1.1 Page 3 of 45 Date: 11th December 2019 Approved by: Atta Subhan Accreditation Procedures GAC 10.16 Scope of Accreditation ACCREDITED Issue No: 3/ Issue Date: 08-04-2020 Accreditation Manager: Hamza Khan PRODUCT CERTIFICATION ISO/IEC 17065:2012 No. APC 0043 Steel wire and wire products for fencing and netting. Hexagonal steel wire netting EN 10223-2 for agricultural, insulation and fencing purposes Steel wire and wire products for fencing and netting. Hexagonal steel wire mesh EN 10223-3 products for civil engineering purposes Steel wire and wire products for fencing and netting. Steel wire woven hinged joint EN 10223-5 and knotted mesh fencing Steel wire and wire products for fencing and netting. Steel wire chain link fencing EN 10223-6 Steel wire and wire products for fencing and netting. Steel wire welded panels for EN 10223-7 fencing Cold-reduced steel wire for the reinforcement of concrete and the manufacture of ISO 10544 welded fabric Stainless steels. Technical delivery conditions for bars, rods, wire, sections and EN 10088-5 bright products of corrosion resisting steels for construction purposes Steel castings for structural uses EN 10340 Specification for steel wire and wire products for fences BS 4102 Threaded steel pipes SASO 859/GSO 492 Submerged - arc spiral welded black steel pipes with plain ends for general SASO 888/GSO 521 purposes Tensile testing of steel SASO 107 Black and hot-dipped galvanized steel pipes suitable for screwing SASO 1011 Welded plain - end steel tubes and pipes for general uses SASO 1013/GSO 765 Standard Specification for Welded and Seamless Steel Pipe Piles ASTM A252 Standard Specification for Electric-Resistance-Welded Steel Pipe ASTM A135/A135M Standard Specification for General Requirements for Specialized Carbon and Alloy ASTM A530/A530M Steel Pipe Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower ASTM A524 Temperatures Standard Specification for Carbon Structural Steel ASTM A36 Version: 1.1 Page 4 of 45 Date: 11th December 2019 Approved by: Atta Subhan Accreditation Procedures GAC 10.16 Scope of Accreditation ACCREDITED Issue No: 3/ Issue Date: 08-04-2020 Accreditation Manager: Hamza Khan PRODUCT CERTIFICATION ISO/IEC 17065:2012 No. APC 0043 Standard Specification for General Requirements for Rolled Structural Steel Bars, ASTM A6/ASTM A53 Plates, Shapes, and Sheet Piling Prestressing steels Part 1：General requirements EN 10138-1 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete ASTM A767 Reinforcement Steel wire and wire products for fencing and netting. Steel wire welded mesh EN 10223-4 fencing Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete ASTM A706 Reinforcement Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete ASTM A615 Reinforcement Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by ASTM A924 the Hot-Dip Process Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and ASTM A755 Pre-painted by the Coil-Coating Process for Exterior Exposed Building Products Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy- ASTM A653 Coated (Galvannealed) by the Hot-Dip Process Standard Specification for High-Strength Low-Alloy Structural Steel ASTM A242 Standard Specification for High-Yield Strength, Quenched and Tempered Alloy Steel ASTM A514 Plate, Suitable for Welding Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi ASTM A588 [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural ASTM A913 Quality, Produced by Quenching and Self-Tempering Process (QST) Cold formed sheet piling of non-alloy steels. Technical delivery conditions EN 10249-1 Steel pipes - plain end alloy and non-alloy - wall thickness and dimensions SASO 726 Pressure pipeline components -definition of nominal size (nominal diameter)- SASO 728 nominal pressure. Version: 1.1 Page 5 of 45 Date: 11th December 2019 Approved by: Atta Subhan Accreditation Procedures GAC 10.16 Scope of Accreditation ACCREDITED Issue No: 3/ Issue Date: 08-04-2020 Accreditation Manager: Hamza Khan PRODUCT CERTIFICATION ISO/IEC 17065:2012 No. APC 0043 Metal conduits and fittings for electrical installations SASO 1901 TECHNICAL REGULATION NO. M.A.-166 -18-04-02 Electrical Batteries Lead-acid starter batteries - Part 1: General requirements and methods of test IEC 60095-1 Lead-acid starter batteries - part 4: dimensions of batteries for heavy vehicles IEC 60095-4 Primary batteries – Part 1: General IEC 60086-1 Primary batteries – Part 2: Physical and electrical specifications IEC 60086-2 Primary batteries – Part 3: Watch batteries IEC 60086-3 Primary batteries – Part 4: Safety of lithium batteries IEC 60086-4 Primary batteries – Part 5: Safety of batteries with aqueous electrolyte IEC 60086-5 Primary batteries – Part 5: Safety of batteries with aqueous electrolyte IEC 60095-5 Lead-acid traction batteries - Part 1: General requirements and methods of tests IEC 60254-1 Lead-acid traction batteries- Part 2: