For Pricing and Days to Ship,Please Congure Online. Engineered Plastics Guide QLine-ups and Characteristics of Engineered Plastics Properties Properties Generic Generic Color Grade Feature Color Grade Feature Page Material Sample Color Name Electric Continuous Dimension Abrasion Sliding Page Material Sample Color Name Electric Continuous Dimension Abrasion Sliding Properties Use Stability Resistance Properties Properties Use Stability Resistance Properties -50°C [Feature] Standard: Well balanced in heat resistance, insulation, dimension stability, chemical resistance, abrasion -40°C [Feature] MC Nylon® of Nippon Polypenco Ltd. is the most general material in engineered plastics and used for various Ash Standard Blue MC901 Insulation ~ R G G Standard PEEK Insulation ~ G G G resistance and machinability. industrial purposes. Brown 120°C 250°C Sliding: In addition to the features of Standard Type, it excels in mechanical characteristics and sliding property Excels in mechanical strength and abrasion resistance, but not in dimension stability due to high water at high temperature. absorption. Insulation Conductivity: In addition to the features of Standard Type, Specific Volume Resistivity is low and excels in [Appearance] Stripes on upper and lower surfaces of materials are developed from production process. Colors may have Normal and conductivity. -40°C lot variations but it does not affect the physical properties. Temperature Standard Ivory MC900NC Insulation ~ R G G P.959 PEEK Sliding Black - Conductive G G G [Appearance] Upper and lower surfaces of the material are glossy. Weld line (resin flow mark) is developed from [Machinability] Machinability is good but less than that of Polyacetal due to special stickiness. ~ 120°C Mixed: Not production process. It can be removed by milled surface finishing. 250°C measurable. [Machinability] Machinability is good, however, they may tend to chip in the direction of the milling path. Beware of [Feature] Dynamic Friction Coefficient is low. Excels in sliding properties, abrasion resistance and mechanical strength. the milling speed. When drilling a hole, the reference feeding speed when going through is 0.1mm per Normal [Appearance] Stripes on upper and lower surfaces of materials are developed from production process. Feel rough due to rotation. -40°C Temperature Sliding Purple MC703HL Insulation ~ R P P the special additive. Conductive Black - Conductive G G G [Caution] Do not use Sliding Type and Conductive Type as heating elements or electric parts such as contact points or 120°C [Machinability] Same as Standard Type. ~ terminals. 250°C [Caution] Do not use for processing of food oils and fats. Normal [Feature] Standard: Excels in heat resistance, chemical resistance and dimensional stability. More economical than PEEK. Abrasion Normal [Feature] Upper temperature limit is higher than that of Standard Type and excels in mechanical strength. Resistance: Superior in abrasion resistance and sliding property, especially in dimensional stability to Standard Type. High Dark Temperature Natural Temperature MC602ST Insulation R G G [Appearance] Stripes on upper and lower surfaces of materials are developed from production process. Standard PPS Insulation G R R [Appearance] Upper and lower surfaces of the material are glossy. Weld line (resin flow mark) is developed from ~ Strength Brown Color ~ [Machinability] Same as Standard Type. Material is harder than that of Standard Type. production process. It can be removed by milled surface finishing. 150°C 190°C MC [Machinability] Machinability is good, however, they may tend to chip in the direction of the milling path. Beware of the P.963 PPS P.939 NylonR milling speed. When drilling a hole, the reference feeding speed when going through is 0.1mm per rotation. Normal Normal [Feature] Excels in weather resistance and abrasion resistance. Can be used outdoors over a long period of time. [Caution] PPS generates an oxide film on the surface and the color turns to brown when it is exposed to light and heat Weather Dark Temperature Abrasion Temperature MC801 Insulation R P G [Appearance] Stripes on upper and lower surfaces of materials are developed from production process. Blue - Antistatic P P G (direct sunlight, fluorescent light, mercury lamp and high-temperature atmosphere) for long hours. However, it ~ Resistance Gray Resistance ~ 120°C [Machinability] Same as Standard Type. changes little in mechanical prope 220°C *Unlike Standard Type, discoloration doesn't occur due to the addition of color. Normal Normal [Feature] Unilate® excels in heat resistance, voltage resistance, strength and machinability. Unilate® of Unitica Ltd., not Electric Temperature Natural Temperature annealed material, is used. Conductivity Black MC501CDR2 Conductive R R G [Feature] Conductivity CDR2: Has the highest conductivity in MC Nylon® of conductive grade. Suitable where quick P.965 Unilate® Standard Unilate® Insulation G R R ~ Brown ~ [Appearance] Upper and lower surfaces are very smooth. CDR2 conductivity is required. 120°C 120°C [Machinability] Laminated plate with relatively good machinability. Conductivity CDR6: Electric property is between conductive and antistatic. The most general and economical in MC Nylon® of conductive grade. [Feature] Electric property is antistatic. Uses PET whose Water Absorption Ratio · Linear Expansion Coefficient is at low Normal Normal Conductivity CDR9: Electric property is antistatic. Has the highest heat resistance in MC Nylon® of conductive level, and thus, excels in Dimension Stability. Electric Temperature Temperature Conductivity Black MC501CDR6 Antistatic R R G grade. P.965 PET Antistatic Black PET300ESD Antistatic P G G [Appearance] Stripes on upper and lower surfaces of materials are developed from production process. Frequency of ~ CDR6 [Appearance] Marks are printed with "R2" (white), "R6" (yellow) and "R9" (green) marks on upper and lower surfaces of ~ color staining is less than MC Nylon® Conductivity CDR6. 120°C 100°C the material to distinguish the conductive grades. [Machinability] Uses PET material, and thus, is superior to MC Nylon, etc. in Machinability. Stripes on upper and lower surfaces of materials are developed from production process. Normal Normal [Machinability] Same as Standard Type. Material contains carbons and is harder than that of Standard Type. PBT PBT R [Feature] Excels in heat resistance, electric property, dimension stability and insulation. Electric Temperature Temperature Conductivity Black MC501CDR9 Antistatic R G G [Caution] Do not use as heating elements or electric parts such as contact points or terminals. P.967 Polybutylene Standard White Polybutylene Insulation G R ~ [Appearance] Marks of machining on upper and lower surfaces are developed from production process. ~ CDR9 Terephthalate Terephthalate ~ G [Machinability] Good machinability. 150°C 120°C Normal POM -45°C [Feature] Excels in machinability and adhesion is possible. The material is often used for prototypes. ® Natural Temperature Standard White Polyoxymethylene Insulation ~ G R G [Feature] General Engineered Plastics for various industrial purposes. Equal to Duracon . P.967 ABS Resin Standard ABS Resin Insulation P R R [Appearance] Upper and lower surfaces are glossy and smooth by the size up to 10mm. Color ~ Duracon 95°C Has low water absorption and excels in dimension stability. Inferior to MC Nylon® in heat resistance and [Machinability] Good machinability. 50°C abrasion resistance. [Appearance] Upper and lower surfaces look and feel smooth. Weld line (resin flow mark) is developed from production POM -45°C process. QReference Values of Specific Volume Resistivity and Heat Resistance (For physical properties, see P.899~P.901) Standard Black Polyoxymethylene Insulation ~ G R G [Machinability] Good machinability. Duracon 95°C Specific Volume Resistivity (Unit: Ω·cm) P.943 Polyacetal Item 2 4 6 8 10 12 14 16 18 [Feature] Only small friction heat is generated when sliding and therefore small power is required for operation. Excels in ~10 10 10 10 10 10 10 10 10 -45°C abrasion resistance and dimension stability. Sliding White - Insulation ~ G P P Electric Property 95°C [Appearance] Same as Standard Type. Conductive Antistatic Insulation [Machinability] Same as Standard Type. 300 Normal [Feature] No-carbon antistatic material is used and effective for antistatic. Electric Temperature Ocher - Antistatic R G G [Appearance] Unlike Standard Type, weld line (resin flow mark) is not highly visible. Epoxy Glass Fluorine Conductivity ~ 250 PEEK Electric Conductivity PEEK Fluorine 80°C [Machinability] Same as Standard Type. High Temperature Electric Conductivity Standard PPS Standard Abrasion Resistance Laminated 200 phenol -50°C Paper Natural N N PPS ~ formaldehyde Insulation ~ ~ [Feature] General material for various purposes such as insulation and heat resistance. Paper based materials are more Epoxy Glass Bakelite Color G Standard resin w/paper 100°C R R inexpensive than fabric based materials. Standard base [Appearance] Upper and lower surfaces are glossy and smooth. Natural color tone vary per production lot. 150 MC Conductive Nylon CDR9 Laminated Color becomes darker due to oxidation over time. However, it does not affect properties. Paper-based black MC Conductive Nylon MC Conductive Nylon CDR6 MC Nylon Standard PBT Polybutylene Terephthalate phenol -50°C N N color does not change. Paper 100 CDR2 Antistatic PET300ESD Bakelite - Paper / Cloth Unilate (Free-cutting Resin) ~ Bakelite Black formaldehyde Insulation ~ ~ P.947 Bakelite