Safety Data Sheet According to Regulation (EC) No 1907/2006 Revision Date: 03/23/2020 Version: 1.4 Date Printed: GENERIC EU MSDS - NO COUNTRY SPECIFIC DATA - NO OEL DATA SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product Name : 1.5 M Lithium citrate tribasic tetrahydrate Product Number : HR2-681 REACH No. : A registration number is not available for this substance as the substance or its uses are exempted from registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline. CAS Number : 6080-58-6 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances. 1.3 Details of the supplier of the Safety Data Sheet Company : Hampton Research 34 Journey Aliso Viejo, CA 92656-3317 United States Telephone : 949 425 1321 Telephone technical support is available 8:00 a.m. to 4:30 p.m. USA Pacific Standard Time. Fax : 949 425 1611 Fax Technical Support is available 24 hours a day. e-mail : [email protected] e-mail Technical Support is available 24 hours a day. 1.4 Emergency telephone number Emergency phone : 949 425 1321 For CHEMTREC Assistance : 800 424 9300 For CHEMTREC Assistance : 703 527 3887 (International) SECTION 2: Hazards Identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Skin irritation (Category 2), H315 Eye irritation (Category 2), H319 Specific target organ toxicity - single exposure (Category 3), H335 For the full text of the H-Statements mentioned in this Section, see Section 16. Classification according to EU Directives 67/548/EEC or 1999/45/EC Xi Irritant R36/37/38 HR2-681 www.hamptonresearch.com Page 1 of 9 (CONTINUED) - SECTION 2: Hazards Identification For the full text of the R-phrases mentioned in this Section, see Section 16. 2.2 Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Pictogram : Signal word : Warning Hazard statement(s) H315 : Causes skin irritation. H319 : Causes serious eye irritation. H335 : May cause respiratory irritation. Precautionary statement(s) P261 : Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard : none Statements 2.3 Other hazards - none SECTION 3: Composition/Information on Ingredients 3.1 Substances Synonym : Citric acid trilithium salt Trilithium citrate tetrahydrate Formula : C6H5Li3O7 . 4H2O HOC(COOLi)(CH2COOLi)2 . 4H2O Molecular Weight : 281.99 CAS Number : 6080-58-6 EC Number : 213-045-8 RTECS Merck Beilstein SARA MDL # PubChem Substance ID N/A 14,5530 N/A No MFCD00150030 24882227 Hazardous ingredients according to Regulation (EC) No 1272/2008 Component Classification Concentration Trilithium citrate tetrahydrate CAS-No. 6080-58-6 Skin Irrit. 2; Eye Irrit. 2; STOT <= 100 % EC-No. 213-045-8 SE 3; H315, H319, H335 Hazardous ingredients according to Regulation (EC) No 1272/2008 Component Classification Concentration Trilithium citrate tetrahydrate CAS-No. 6080-58-6 Xi, R36/37/38 <= 100 % EC-No. 213-045-8 HR2-681 www.hamptonresearch.com Page 2 of 9 SECTION 4: First Aid Measures 4.1 Description of first aid measures General Advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes as a precaution and consult a physician. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 4.2 Most important symptoms and effects, both acute and delayed To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. The most important known symptoms and effects are described in the labeling (see Section 2.2) and/or in Section 11. 4.3 Indication of any immediate medical attention and special treatment needed no data available SECTION 5: Fire Fighting Measures 5.1 Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. 5.2 Special hazards arising from the substance or mixture Carbon oxides, Lithium oxides 5.3 Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. 5.4 Further Information The product itself does not burn. SECTION 6: Accidental Release Measures 6.1 Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Ensure adequate ventilation. Avoid breathing dust. For personal protection see section 8. 6.2 Environmental precautions Do not let product enter drains. HR2-681 www.hamptonresearch.com Page 3 of 9 (CONTINUED) - SECTION 6: Accidental Release Measures 6.3 Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. 6.4 Reference to other sections For disposal see section 13. SECTION 7: Handling and Storage 7.1 Personal Precautions Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Normal measures for preventive fire protection. For precautions see section 2.2. Normal measures for preventive fire protection. 7.2 Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Hygroscopic. 7.3 Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated. SECTION 8: Exposure Controls/Personal Protection 8.1 Control parameters Components with workplace control parameters 8.2 Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contami- nated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. HR2-681 www.hamptonresearch.com Page 4 of 9 (CONTINUED) - SECTION 8: Exposure Controls/Personal Protection Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail [email protected], test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. Body Protection Complete suit protecting against chemicals, Flame retardant antistatic protective clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. SECTION 9: Physical and Chemical Properties 9.1 Information on basic physical and chemical properties a) Appearance Form: Fine Crystals Color: White b) Odor no data available c) Odor Threshold no data available d) pH 9.0 at 25°C e) Melting point/freezing point no data available f) Initial boiling point and no data available boiling range g) Flash point no data available h) Evaporation rate no data available i) Flammability (solid, gas) no data available HR2-681 www.hamptonresearch.com Page 5 of 9 (CONTINUED) - SECTION 9: Physical and Chemical Properties j) Upper/lower flammability no data available or explosive limits k) Vapor pressure no data available l) Vapor density no data available m) Relative density no data available n) Water solubility no data available o) Partition coefficient: no data available noctanol/water p) Autoignition temperature no data