Tungsten Carbide Burrs for Tough Applications Special Performance in Foundry, Shipbuilding and Steel Construction Applications Cuts New Special 3R and 3RS New, innovative special cuts providing exceptional impact resistance. Highly rugged cut patterns minimize tooth chipping/breakage, splintering and burr head failures. Developed specifically for applications involving high impact loads, the new 3R and 3RS cuts are the latest addition to the existing PFERD range. Tungsten Carbide Burrs for Tough Applications New in the PFERD Range: Innovative High-Performance Cuts For heavy-duty applications in shipyards, minimized. Even when milling at low RPM The new 3R and 3RS cuts are the latest ad- foundries and steel construction, PFERD has with an only moderately powerful machine, dition to the existing PFERD range. They are developed two new special cut patterns for its the occurrence of tooth failures is markedly not intended as substitutes for our proven tungsten carbide burrs. reduced. standard cuts for general-use burrs. The new 3R and 3RS cuts represent a new Like all other PFERD quality burrs, our 3R For the complete line of tungsten carbide burrs PFERD product line designed especially for and 3RS cut types distinguish themselves please refer to our PFERD Catalogue 202, tough operating conditions. These tungsten by their perfectly matched tooth geometry, which we shall be glad to send to you upon carbide burrs are characterized by their excep- number of teeth, helix angle, rake angle, and request! tional impact resistance and performance. The concentricity. Thanks to a very high stock new cuts are ideal for all uses involving high removal capability over the entire service mechanical shock or impact loads. Susceptibil- life, these tools deliver outstanding results in ity to tooth chipping/breakage, splintering minimum time. and burr head cracking has been effectively The new 3R and 3RS cut patterns minimize tooth breakage on tungsten carbide burrs Problem Solutions and advantages Chipping, tooth failures and major burr damage Thanks to perfectly matched production are sometimes encountered in applications parameters, the new 3R and 3RS cut patterns Cut 3R involving high impact loads. will substantially reduce tooth failures on tungsten carbide burrs. Tooth chipping / failure Cross cut. Coarse and aggressive machining with high stock removal, even at low RPM. Cut 3RS Cross cut. Coarse machining with smoother burr operation, even at low RPM. Less aggressive than 3R cut. Distribution in single-burr packs Tungsten carbide burrs featuring the new 3R and 3RS cut patterns are supplied in single- unit packs. The proven plastic box ensures an optimum protection of burr teeth. For easy differentiation from the remaining product range, burrs with 3R and 3RS cuts are clearly marked with the word “New“ on the pack. 2 Tungsten Carbide Burrs for Tough Applications Recommendations for Use, Cut Patterns, Material Groups, Rotational Speeds Recommended Material Groups Application Cut cutting rate Constructional steels Non-hardened, non-heat Carbon steels 3R 250 - 600 m/min Coarse machining = treated steels up to Tool steels high stock removal 1200 N/mm² Non-alloyed steels with impact loading (< 35 HRC) Case-hardened steels, 3RS 250 - 600 m/min Steel castings Hardened, heat-treated Tool steels 3R 250 - 350 m/min Coarse machining = steels exceeding Tempering steels high stock removal 1200 N/mm² Alloyed steels with impact loading (> 35 HRC) Steel castings 3RS 250 - 350 m/min 3R 250 - 600 m/min Grey cast iron Coarse machining = Cast iron Spheroidal graphite cast high stock removal iron with impact loading 3RS 250 - 600 m/min Recommended rotational speeds m/min Cutting rate (m/min) (RPM) for tungsten carbide burrs 250 300 350 450 500 600 for tough applications Ø mm Rotational speed (RPM) See the table across for the recommended 8 10,000 12,000 14,000 18,000 20,000 24,000 rotational speeds (RPM) of burrs in the various diameters. 10 8,000 10,000 11,000 14,000 16,000 19,000 Note that optimum RPM is a function of the 12 7,000 8,000 9,000 12,000 13,000 16,000 cutting rate (m/min) as indicated in the table. 16 5,000 6,000 7,000 9,000 10,000 12,000 Example: Tungsten carbide burr, cut 3R, 12 mm head diameter, coarse machining of non-hardened and non heat-treated steels. Cutting rate: 250 - 600 m/min Rotational speed: 7,000 - 16,000 RPM Safety notes = Wear safety goggles! = Use ear protection! = Observe safety recommendations! For safety reasons, tungsten carbide burrs with longer shafts must be operated at substantially lower RPM levels (refer also to page 7). Use only rigid clamping systems and power tools to avoid safety hazards! 3 Tungsten Carbide Burrs for Tough Applications Standard Shapes d Cylindrical burr according to DIN 8032 (shape Cylindrical1 ZYAS d2 ZYAS) with circumferential. l 2 l 1 Application Interior contour work, i.e., peripheral and face milling Ordering example ZYAS 0820/6 Z3R Order No. Available cuts Shank dia. Head dia. x Overall d length length 3R 3RS 2 [mm] d1 x l2 l1 EAN 4007220 [mm] [mm] ZYAS 0820/6 769997 - 6 8 x 20 60 1 25 ZYAS 1020/6 770023 - 6 10 x 20 60 1 33 ZYAS 1225/8 770054 - 8 12 x 25 65 1 56 r d Flame shape burr. Flamed1 Shape B 2 l2 Application l1 Contouring Ordering example B 0820/6 Z3R Order No. Available cuts Shank dia. Head dia. x Overall d length length 3R 3RS 2 [mm] d1 x l2 l1 EAN 4007220 [mm] [mm] B 0820/6 770061 - 6 8 x 20 60 1 22 B 1230/6 770085 - 6 12 x 30 70 1 48 B 1230/8 770092 - 8 12 x 30 70 1 48 d Ball-shaped burr according to DIN 8032 Ball Shape KUD1 d2 (shape KUD). l2 l 1 Application Contouring Bore deburring Milling in preparation of build-up welding Bestellbeispiel KUD 1210/6 Z3R Order No. Available cuts Shank dia. Head dia. x Overall d length length 3R 3RS 2 [mm] d1 x l2 l1 EAN 4007220 [mm] [mm] KUD 1210/6 770160 - 6 12 x 10 50 1 30 KUD 1210/8 770177 - 8 12 x 10 50 1 35 KUD 1614/8 770184 - 8 16 x 14 54 1 53 4 Tungsten Carbide Burrs for Tough Applications Standard Shapes General-use shape (combination of cylindrical Cylindricald with Radius End WRC 1 d2 and spherical geometries) in accordance with l2 DIN 8032 (shape WRC). l1 Application Surface milling Contouring Ordering example WRC 0820/6 Z3R Order No. Available cuts Shank dia. Head dia. x Overall d length length 3R 3RS 2 [mm] d1 x l2 l1 EAN 4007220 [mm] [mm] WRC 0820/6 770108 - 6 8 x 20 60 1 25 WRC 1020/6 770115 - 6 10 x 20 60 1 32 WRC 1225/6 770122 770139 6 12 x 25 65 1 52 WRC 1225/8 769881 770153 8 12 x 25 65 1 59 flattened tip Bullet-shaped burr according to DIN 8032 Pointed Tree SPG d1 d2 (shape SPG). l2 Application l1 Work on narrow contours Milling of acute-angled surfaces Ordering example SPG 1020/6 Z3R Order No. Available cuts Shank dia. Head dia. x Overall 3R 3RS d2 length length [mm] d1 x l2 l1 EAN 4007220 [mm] [mm] SPG 1020/6 770252 770269 6 10 x 20 60 1 25 SPG 1225/6 770276 - 6 12 x 25 65 1 40 SPG 1225/8 770283 - 8 12 x 25 65 1 47 SPG 1625/8 770290 770306 8 16 x 25 65 1 64 r d Tree-shaped burr according to DIN 8032 Tree1 with Radius End RBF d2 (shape RBF). l2 l1 Application Work on narrow workpiece contours Ordering example RBF 0820/6 Z3R Order No. Available cuts Shank dia Head dia. x Radius Overall 3R 3RS d2 length r length [mm] d1 x l2 [mm] l1 EAN 4007220 [mm] [mm] RBF 0820/6 770191 - 6 8 x 20 1,2 60 1 21 RBF 1020/6 770207 - 6 10 x 20 2,5 60 1 28 RBF 1225/6 770214 770238 6 12 x 25 2,5 65 1 43 RBF 1225/8 770221 770245 8 12 x 25 2,5 65 1 49 5 Tungsten Carbide Burrs for Tough Applications Standard Shapes α Taper burr with radius end according to DIN Conicalr with Radius End KEL 8032 (shape KEL). d 1 d2 Angle a = 14° l2 Application l1 Work on narrow workpiece contours and surfaces Ordering example KEL 1225/6 Z3R Order No. Available cuts Shank dia. Head dia. x Radius Overall 3R 3RS d2 length r length [mm] d1 x l2 [mm] l1 EAN 4007220 [mm] [mm] KEL 1225/6 770320 - 6 12 x 25 3,3 65 1 39 KEL 1225/8 770337 - 8 12 x 25 3,3 65 1 47 Oval burr according to DIN 8032 (shape TRE). Oval TREr d 1 d 2 Application Contouring l 2 l 1 Ordering example TRE 1016/6 Z3R Order No. Available cuts Shank dia. Head dia. x Radius Overall 3R 3RS d2 length r length [mm] d1 x l2 [mm] l1 EAN 4007220 [mm] [mm] TRE 1016/6 770344 770382 6 10 x 16 4,0 56 1 27 TRE 1220/6 770351 - 6 12 x 20 5,0 60 1 41 TRE 1220/8 770368 - 8 12 x 20 5,0 60 1 48 6 Tungsten Carbide Burrs for Tough Applications Long Shank Versions, Drive Spindle Extensions Tungsten Carbide Burrs with Special Shank Lengths Long shank versions – available on request Tungsten carbide burrs for tough applications are optionally available in 150 and 200 mm shank lengths.