TTS 1400 Plunge Track Saw Features & Benefits Fit Triton’s TTS1400 Plunge Track Saw to a track for long, precise cuts. The mode • Precise plunge saw for straight & bevel cutting. selector barrel activates free plunge, scribe, or blade change, and cutting width • Powerful 1400W / 12A motor with variable speed, soft indicators show the exact position where the blade plunges into the workpiece. start, overload protection & constant speed electronics. Features include soft start and variable speed, whilst the dual bevel quadrants front • Close-to-wall cutting capability (15mm / 5⁄8") and rear provide cutting stability to a depth of 54mm / 2 1⁄8". For clean, accurate for expanded applications. cuts through every material, Triton’s TTS1400 Plunge Track • Dual front & rear bevel quadrants for improved stability. Saw delivers - on or off the track - every time. • Free plunge, scribe & blade change modes. • Dual alignment cams for fine tuning the saw base with the track. • Anti-kickback for improved safety. Standard Equipment • 60 TCT Saw Blade. Optional Equipment • TTSAG Angle Guide. • TTSAS1500 1500 mm Friction Strip. • TTSCB1500 Canvas Bag for 1500 mm Track. • TTSCB700 Canvas Bag for 700 mm Track. • TTSDES Dust Extraction System. • TTSPG Parallel Guide. • TTSSB Plunge Saw Bag. • TTST1500 1500 mm Track. • TTSTP Track Pack Connectors. • TTSTS T-Square. • TTSWC Work clamps. Optional accessories TTS T1500 TTS AG TTS WC 1500 mm Friction Strip Angle Guide Work Clamps TTS TS T-Square Features & Benefits TRA 001 MO F 001 • Single button switches from conventional plunge to fixed-base router with rack & pinion mode. • Through base, single wrench bit change is achieved with automatic spindle lock. • Micro Winder enables continuous fine depth adjustment through the full plunge range. • Automatic spindle lock engages only when the power switch cover is closed. • 3 stage turret with direct reading scales for precise preset cut depths. • Fully enclosed guarding provides maximum protection from the cut zone. • Side air vents reduces intake of dust into the motor casing when mounted upside-down in a router table. • Quick access to change worn brushes. Standard Equipment • Multi-function Fence. • ½ collet with ¼" reducer. • Collet wrench. • Straight Bit. MO F 001 TRA 001 2 HP Precision Plunge Router 3-1/4 HP Dual Mode Precision Features & Benefits Plunge Router Features & Benefits • 1400 W (2 HP) motor with soft start and variable speed provides the perfect speed for all cutter types. • Soft start and variable speed provides • Removable plunge spring allows easy bit the perfect speed for all cutter types. adjustment when table mounted. • 2000 W (3-1/4 HP) Motor provides • Safety switch shutter locks closed in bit TGA 001 enough power for even the toughest change mode to prevent power-on. timbers. • Multi-function fence: Optional • Removable plunge spring allows for - Extended base for greater stability. easy lifting and adjustment of the - Full fence adjustment for trenching etc. accessories machine when table mounted. Built-in circle cutter. • Multi-function fence provides - excellent control for hand-held use and circle cutting. TSPS 450 Oscillating Spindle Sander Features & Benefits • Powerful 450W / 3.5A motor • Large 370 x 295mm / 14-1⁄2" x 11-1⁄2" cast iron table for stability & enhanced material support. • Ideal for sanding contours, arcs, curves & other irregular shapes. • Rotating & oscillating action for increased speed & efficiency & precise finishing of intricate work. • Includes 6 sanding sleeves with matching rubber drums & table inserts. Accessories • On-board storage for all accessories. CTSS13 Sleeves 13 mm 60/80/100/150/240 • 38mm / 1-1⁄2" Dust port for connection CTSS19 Sleeves 19 mm 60/80/100/150/240 to extraction system. CTSS26 Sleeves 26 mm 60/80/100/150/240 CTSS38 Sleeves 38 mm 60/80/100/150/240 Standard Equipment CTSS51 Sleeves 51 mm 60/80/100/150/240 CTSS76 Sleeves 76 mm 60/80/100/150/240 • 6 x Sanding Sleeves. CTSS60G Sleeves (6) All dia. 60 Grit • 6 x Table Inserts. CTSS80G Sleeves (6) All dia. 80 Grit • 5 x Rubber Sanding Drums. CTSS100G Sleeves (6) All dia. 100 Grit CTSS150G Sleeves (6) All dia. 150 Grit CTSS240G Sleeves (6) All dia. 240 Grit T12 TP 12V Twin Pack Features & Benefits 12V Drill Driver kit T12 DD IMPACT DRIVER • 6mm / ¼" quick-release hex drive. • Powerful Mabuchi motor with variable speed & reverse. • 90Nm sustained torque. • Delivers 3000 impacts per minute. DRILL DRIVER • 10mm / 3⁄8" quick-release chuck with automatic spindle lock. • 2-speed Mabuchi motor with variable speed & reverse. • 17 torque settings plus drill. • Hard torque of 20Nm, 177 in/lb. Soft torque of 15Nm, 133 in/lb. • Max drilling capacity in Wood 20mm, Steel 6mm. Standard Equipment (T12TP & T12DD) • 2 x 1.5Ah Li-Ion Batteries. • Soft Carry Case. • 1 x Charger. Optional accessories T12 HCB 12V 3,0 Lithium-Ion Battery (high capacity) TA 1200BS Belt Sander TC MBS Palm Sander Features & Benefits Features & Benefits • Powerful, variable speed 10 A motor that drives the • Efficient 450W / 3.5A motor makes light work sanding belt between 200 and 450 m/min for rapid stock removal. of common sanding applications. • Rubber Over Moulded Grip offers increased support, • Fits neatly in the palm for single-handed use. safety and control of the tool. • 64 x 406mm / 2 1⁄2" x 16" belt for intricate work • Removable Bail Handle increases support and safety. • Also compatible with 60 x 400mm / 2 1⁄3" x 15 3⁄4" sanding belts. • Variable Speed Control improves versatility when working • Comfortable lock-on function. with different work pieces. • Quick-release belt lever. • Power - On Neon shows the sander is plugged in, • Flush side for sanding up to the edge of the switched on and ready to be used. workpiece. • Magnesium Construction increases durability and strength and delivers significant weight reduction. Standard Equipment • Lock-On Button adds convenience with extended use. • Small Diameter Front Roller allows for sanding into confined areas. • 3 x Sanding Belts 60 grit (1 fitted). • Belt Tracking Adjustment for accurate alignment of sanding belt. • Dust Extraction Adaptor. • Side Dust Port connects to the supplied dust bag or vacuum system. Accessories TCMBS40G Sanding belts (3) 2,5’ x 16” 40 Grit TCMBS60G Sanding belts (3) 2,5’ x 16” 60 Grit TCMBS80G Sanding belts (3) 2,5’ x 16” 80 Grit TCMBS100G Sanding belts (3) 2,5’ x 16” 100 Grit TCMBS120G Sanding belts (3) 2,5’ x 16” 120 Grit TCMBSCPK Sanding belts (3) 2,5’ x 16” Coarse Mix 40/60/80 Grit TCMBSFPK Sanding belts (3) 2,5’ x 16” Fine Mix 80/100/120 Grit SJ A 200 Portable Clamping System Features & Benefits • Powerful 2200 lb clamping force – apply as much or as little clamping pressure as you require. • Reversible sliding jaws allow for extra wide 956 mm (37,5”) clamping width capacity. • Urethane jaw facings provide a protective, slipresistant grip. • Robust, all-steel construction with powdercoat finish for long lasting operation. • Foot operated clamping frees up your hands for full control. • Extra wide tripod base for all-terrain stability, even with oversized objects. • Lock/release switch allows fast, trouble-free release of the jaws. • Folds down for storage & transport – rear leg acts as handle. • Stand alone design allows 360° access to the work. Optional accessories SJA 420 SJA 460 SJA 470 Extension tray Log jaws Cast engineer’s jaws MS A 200 Multi-stand WR A 001 Woodrack Features & Benefits Features & Benefits • Multi-purpose support stand with extra-wide tripod base • Provides generous storage capacity for timber, pipes and other long items. for excellent stability on level or uneven ground. • For internal and external mounting applications. • Low friction slide surfaces provide smooth, controlled travel • Suits workshops, garages, sheds, fences and supported walls. without unwanted “steering”. • Six levels of storage. • Tilting, swivelling head features an open U-channel combined • Holds 110lbs of material per level. with built-in clamping system. • Quick and easy installation. • Unlike a conventional roller stand, the low-friction skids ensure • Powder-coated steel tube construction the work piece follows the direction of the feed, not the for increased durability and life. direction of the roller. • Head pivots from horizontal to vertical allows for uneven Standard Equipment ground or for special jobs. • Height quickly adjusts from 25” to 37”. • 12 Racks. • Supports 220 lb. • 12 End caps. • Folds flat for easy storage and transport. • 12 6g x ¼”Pan head screws. • 2 Uprights. • 6 Spacers. 07/2014.