VEX-P Combination of Drilling and Front and Back Chamfering in One Operation. • High performance replaceable carbide drill tip combined with patented SNAP chamfering system • VEX drill geometry for better chip control • Quick and easy drill tip and chamfer blade replacement • Coolant Through • Sizes 11.0-17.0mm (.433-.669”) available from stock Cat. No. HTC019 Case Study VEX-P Series CatalogHTC019 No. HTC14 COFA COFA VEX-P l COFA-C COFA-C Combination of Drilling and Front/Back l Chamfering in SNAP SNAP One Operation. l VEX-S VEX-P Study Details The VEX-P tool combines a replaceable solid COMBI TOOL VEX-P carbide high performance drill tip with HEULE’s patented SNAP chamfering system to enable PRODUCTION 30,000 parts per month drilling and front and back chamfering in one operation. l MACHINE DEFA Vertical CNC “The Vex-P combination tool MATERIAL replaced two tools and cut 1050 Steel l our cycle time in half for that GH-K HOLE SIZE Ø13.0mm (.512”) drilled front operation....” and back chamfered in one single operation For bores from diameters 11.00 mm to 17.0 mm l (0.433 - 0.669”) and bore depths up to 1.5 times BSF DETAILS Tool: diameter. Speed: VEX-P SNAP12 drill combi l 3720 RPM 500 SFM SOLO SOLO Feed: VEX: 0.25 mm/rev (.0101” IPR) Life: SNAP: 0.20 mm/rev (.008” IPR) VEX: 4,500 holes/ SNAP: 13,500 holes l GH-Z/E REPLACING Solid carbide and secondary operation PRODUCT SECTION 124 513.860.9900 www.heuletool.com Introduction VEX-P Series Catalog No.HTC019 HTC014 COFA COFA How to Select a VEX-P Tool Order Number Example: P- P- D 1450 -1 A 1. Determine the drill hole size. 2. Select the appropriate drill tip and the coordinating tool holder. l 3. Choose the SNAP chamfer blade according to the needed chamfer size. 1 = Series COFA-C 1 Series 2 = Bore-Ød Bore Range Series 3 = Cutting Material 11.0-13.99 C 4 = Coating 14.0-17.0 D l SNAP SNAP 2 Bore Diameter Ød Order Example: Indicate the bore diameter here. For example: Ø15.10 = 1510 Bore-Ød = 14.50mm Standard size as shown. Carbide Quality = K20-K30 l 3 Cutting Material Coating = TiAlN VEX-S Carbide K20-K30 1 Order Number: P-P-D-1450-1A 4 Coating TiAIN A VEX-P DLC D Within the holder range, drill tips of different diameters can be exchanged within the same series number. COMBI Tool Description 6 8 7 2 3 4 1 5 1 Tool Body 2 Control Bolt l 3 Spring DEFA 4 Distance Pin 5 Cap Screw 6 Torx Screw 7 Chamfer Blade l GH-K 8 Drill Tip Spare Parts 2 3 4 5 l Bore Range Series Control Bolt Spring Distance Pin Cap Screw Hex Wrench Hex Wrench BSF GH-H-S- GH-H-S- Description mm 11.0 - 11.99 C GH-Q-E-0078 GH-H-F-0027 GH-Q-E-0503 0538-1 2100 2.5 l 12.0 - 13.99 C GH-Q-E-0002 GH-H-F-0012 GH-Q-E-0514 0524-1 2103 3.0 SOLO 14.0 - 15.49 D GH-Q-E-0002 GH-H-F-0012 GH-Q-E-0514 0524-1 2103 3.0 15.5 - 17.0 D GH-Q-E-0002 GH-H-F-0012 GH-Q-E-0515 0524-1 2103 3.0 Recommended 6 l Bore Range Series Torx Screw Clamp Screw Torx Wrench Torque Setting Precision Torque Wrench GH-Z/E Description GH-H-S- Nm Wrench Order # Description 11.0 - 11.99 C GH-H-S-0038 M2.2 x 10.2 T7 2001 1.1 HT-TX-H-0002 Handle 1.1 NM 12.0 - 13.99 C GH-H-S-0038 M2.2 x 10.2 T7 2001 1.1 with IP7 Torx Bit 14.0 - 15.49 D GH-H-S-0035 M2.5 x 12 T8 2002 1.2 HT-TX-H-0003 Handle 1.2 NM 15.5 - 17.0 D GH-H-S-0035 M2.5 x 12 T8 2002 1.2 with T8 Torx Bit 513-860-9900 www.heuletool.com 125 Drill/Chamfer Tools – Series C .433 - .547” VEX-P 1.5xdSeries For holes 11.0 - 13.9mm CatalogHTC019 No. HTC14 COFA COFA Ød Ød1 l Ø20h6 COFA-C COFA-C X1 X 8 Ln 52 L1 T Max = 1.5 x hole diameter l SNAP SNAP VEX-P Series C Tool Holders Ødx1.5 with Coolant Through l Tool Holder VEX-S Ød Range Ød1 L1 Ln X1 X Order Number GH-Q-O-4250E 11.0 – 11.4 10.8 (.425”) 116.9 (4.602”) 17.2 (.677”) 2.5 (.099”) 33.5 (1.319”) GH-Q-O-4251E 11.5 – 11.9 11.3 (.445”) 118.2 (4.654”) 18.0 (.709”) 2.6 (.102”) 34.3 (1.350”) GH-Q-O-4252E 12.0 – 12.4 11.8 (.465”) 119.4 (4.701”) 18.7 (.736”) 2.7 (.106”) 35.1 (1.382”) VEX-P GH-Q-O-4253E 12.5 – 12.9 12.3 (.484”) 120.7 (4.752”) 19.5 (.768”) 2.8 (.110”) 35.8 (1.409”) GH-Q-O-4254E 13.0 – 13.4 12.8 (.504”) 121.9 (4.799”) 20.2 (795”) 2.9 (.114”) 36.6 (1.441”) GH-Q-O-4255E 13.5 – 13.9 13.3 (.524”) 123.2 (4.850”) 21.0 (.827”) 3.0 (.118”) 37.3 (1.469”) COMBI VEX-P Series C Drills & Chamfer Blades Chamfer Blade Order Number (fab)* Tool Holder Carbide TiAlN Ød Drill* (0.25mm x 45°) (0.5mm x 45°) (0.75mm x 45°) (1.0mm x 45°) l DEFA Order Number Drill Order # Series Cmf. GH-Q-M- GH-Q-M- GH-Q-M- GH-Q-M- 11.0mm -03726 -03727 -03728 GH-Q-O-4250E P-P-C-1100-1A - (.433”) (11.5) (12.0) (12.5) 11.1mm -03727 -03728 -03729 l GH-Q-O-4250E P-P-C-1110-1A - GH-K (.437”) (12.0) (12.5) (13.0) 8 11.5mm -03727 -03728 -03729 GH-Q-O-4251E P-P-C-1150-1A - (.453”) (12.0) (12.5) (13.0) 11.9mm -03728 -03729 -03730 l GH-Q-O-4251E P-P-C-1190-1A - (.469”) (12.5) (13.0) (13.5) BSF 12.0mm -03740 -03741 -03742 -03743 GH-Q-O-4252E P-P-C-1200-1A (.472”) (12.5) (13.0) (13.5) (14.0) l SOLO SOLO 12.5mm -03741 -03742 -03743 -03744 GH-Q-O-4253E P-P-C-1250-1A (.492”) (13.0) (13.5) (14.0) (14.5) 12 12.7mm -03741 -03742 -03743 -03744 GH-Q-O-4253E P-P-C-1270-1A (.500”) (13.0) (13.5) (14.0) (14.5) l GH-Z/E 13.0mm -03742 -03743 -03744 -03745 GH-Q-O-4254E P-P-C-1300-1A (.511”) (13.5) (14.0) (14.5) (15.0) 13.5mm -03743 -03744 -03745 -03746 GH-Q-O-4255E P-P-C-1350-1A (.531”) (14.0) (14.5) (15.0) (15.5) *Special sizes and geometries available on request SPARE PG. PARTS 125 126 513.860.9900 www.heuletool.com Drill/Chamfer Tools – Series D .551 - .669” VEX-P 1.5xdSeries For holes 14.0 - 17mm Catalog No.HTC019 HTC014 COFA COFA Ød Ød1 l Ø20h6 COFA-C COFA-C X1 X 8 Ln 52 L1 T Max = 1.5 x hole diameter l SNAP SNAP VEX-P Series D Tool Holders Ødx1.5 with Coolant Through l Tool Holder Ød Range Ød1 L1 Ln X1 X VEX-S Order Number GH-Q-O-4256E 14.0 – 14.4 13.8 (.543”) 123.4 (4.858”) 21.7 (.854”) 3.1 (.122”) 37.1 (1.461) GH-Q-O-4257E 14.5 – 14.9 14.3 (.563”) 124.7 (4.909”) 22.5 (.886”) 3.2 (.126”) 37.8 (1.488) GH-Q-O-4258E 15.0 – 15.4 14.8 (.583”) 125.9 (4.957”) 23.2 (.913”) 3.3 (.130”) 38.6 (1.520) VEX-P GH-Q-O-4259E 15.5 – 15.9 15.3 (.602”) 127.2 (5.008”) 24.0 (.945”) 3.4 (.134”) 39.3 (1.547) GH-Q-O-4260E 16.0 – 16.4 15.8 (.622”) 128.4 (5.055”) 24.7 (.972”) 3.5 (.138”) 40.1 (1.579) GH-Q-O-4261E 16.5 – 17.0 16.3 (.642”) 129.7 (5.106”) 25.5 (1.004”) 3.6 (.142”) 40.8 (1.606) COMBI VEX-P Series D Drills & Chamfer Blades Chamfer Blade Order Number (fab)* Tool Holder Carbide TiAlN Ød Drill* (0.25mm x 45°) (0.5mm x 45°) (0.75mm x 45°) (1.0mm x 45°) Drill Order # l Order Number Series Cmf. GH-Q-M- GH-Q-M- GH-Q-M- GH-Q-M- DEFA 14.0mm -03744 -03745 -03746 -03747 GH-Q-O-4256E P-P-D-1400-1A (.551”) 14.5 15.0 15.5 16.0 14.3mm -03744 -03745 -03746 -03747 GH-Q-O-4256E P-P-D-1430-1A l (.562”) 14.5 15.0 15.5 16.0 GH-K 14.5mm -03745 -03746 -03747 -03748 GH-Q-O-4257E P-P-D-1450-1A (.571”) 15.0 15.5 16.0 16.5 15.0mm -03746 -03747 -03748 -03749 GH-Q-O-4258E P-P-D-1500-1A l (.591”) 15.5 16.0 16.5 17.0 BSF 12 15.5mm -03747 -03748 -03749 -03750 GH-Q-O-4259E P-P-D-1550-1A (.610”) 16.0 16.5 17.0 17.5 l 15.9mm -03748 -03749 -03750 -03751 SOLO GH-Q-O-4259E P-P-D-1590-1A (5/8”) 16.5 17.0 17.5 18.0 16.0mm -03748 -03749 -03750 -03751 GH-Q-O-4260E P-P-D-1600-1A (.630”) 16.5 17.0 17.5 18.0 l 16.5mm -03749 -03750 -03751 -03752 GH-Z/E GH-Q-O-4261E P-P-D-1650-1A (.650”) 17.0 17.5 18.0 18.5 17.0mm -03750 -03751 -03752 -03753 GH-Q-O-4261E P-P-D-1700-1A (.669”) 17.5 18.0 18.5 19.0 *Special sizes available on request PG.