ITB-HTOC-77684-13-16153 (MS) Lot A-7: Laboratory Equipment SECTION V – SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications for Lot A-7 Lot composition: Tender Additional Code Equipment Quantity quantity* A-7.01 Analyzer, CD4 1 0 A-7.02 Analyzers, Laboratory, Bloodgas/pH/Electrolyte 1 0 A-7.03 Analyzers, Laboratory, Chemistry 1 0 A-7.04 Analyzers, Laboratory, Hematology 1 0 A-7.05 Centrifuge, chemistry 1 0 A-7.06 Centrifuge, microbiology 1 0 A-7.07 Centrifuge, microhematocrit 1 0 A-7.08 Clinical rotator 2 0 A-7.09 Clock, with humidity and Temp 3 4 A-7.10 Coagulation instrument 1 0 A-7.11 Dryer, vertical 2 0 A-7.12 Hot plate 1 0 A-7.13 Incinerator, bacteria 2 0 A-7.14 Incubator 1 0 A-7.15 Laboratory Instrument Set 1 0 A-7.16 Mechanical Pipette large 2 0 A-7.17 Mechanical Pipette small 2 0 A-7.18 Microscope 4 0 A-7.19 Microscope, fluorescent 2 0 A-7.20 Pipet aid 2 0 A-7.21 Refrigerators, laboratory 1 1 A-7.22 Refrigerators, laboratory with freezer 1 0 A-7.23 Refrigerators, Laboratory, big size 1 0 A-7.24 Refrigerators, Laboratory, Vaccine Conservation 5 0 A-7.25 Slide holders, large 2 0 SECTION V – SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 1 of 51 ITB-HTOC-77684-13-16153(MS) Lot A-7: Laboratory Equipment A-7.26 Slide holders, small 2 0 A-7.27 Spectrophotometer: Semi-automated 1 0 A-7.28 Stands, micropipette 2 0 A-7.29 Stands, pipette 2 0 A-7.30 Sterilizer Unit, Dry 2 1 A-7.31 Tray and rack, slide staining 2 0 A-7.32 Tray, blood collection 2 0 A-7.33 Turbidity meter 2 0 A-7.34 Ventilated workstation 1 0 A-7.35 Vortex mixer 3 0 A-7.36 Warmer, Blood Tubes 5 0 A-7.37 Watch, stop, mechanical 2 0 A-7.38 Water bath 2 0 *Additional quantity that may be required during the extended Bid validity according with the Tender document section: BDS 13.1. Each equipment shall be CE marked, 98/79/EEC, or FDA approved for medical laboratory use. The Bidders or each Manufacturer shall be ISO9001 Certified. Copy of the above mentioned CE mark, 98/79/EEC, or FDA approval and ISO9001 certifications shall be included in the offer. Some of the following specifications are composed by a text and a picture, both are describing the item. In case of discordance text prevails on picture. The pictures have to be intended as representations of the technological level, the design quality and the construction specifications of the items and not referring to specific commercial brands and models. An offered item shall be compliant to the text technical specifications and to the technological level, the design quality and the construction specifications displayed in the pictures. In some case a Reference Producer and Model have been indicated to better define the specifications. Texts and pictures prevail on Reference Model. Any model technically equivalent to the Reference one will be accepted. The above, quantities are indicative and not exhaustive requirements. SECTION V – SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 2 of 51 ITB-HTOC-77684-13-16153(MS) Lot A-7: Laboratory Equipment Item A-7.01 Analyzer, CD4 Flow cytometer able to provide absolute and percentage results of CD4 T lymphocytes to stage the progression of HIV/AIDS Electrical characteristics 1) A 120V, 60Hz mono-phase electrical source with line connection plug NEMA 5-15 type. 2) Protections against over-voltage and over-current line conditions. 3) Compliance with applicable Haitian standards and regulations. 4) Equipment provided with an adequate Uninterruptible Power Supply (UPS) system with not less than 30 minutes of back-up. Operational characteristics 5) LCD/TFT screen. 6) Sample no greater than 50 μL. 7) Convection or water cooled laser technology. 8) Measure of CD4, absolute and percentage, CD3 and CD8 within at least the following ranges: a) CD4+: 100 to 2,000 cells/μL; b) CD3+: 200 to 3,000 cells/μL. c) CD8+: 200 to 1,500 cells/μL; 9) CD4 counting precision with variation no greater than 10% for sample with CD4 > 200 cells/μL. 10) Fluid reservoir. 11) Measuring time not greater than 4 minutes. 12) Mean time between 2 analyses no greater than 3 minutes. 13) Capacity of at least 20 samples/hour. Additional consumables and accessories to be included in the bid price; quote each separately: 14) Electronic pipette. 15) Built in or external thermal printer. 16) Sample preparation stand. 17) CD4 Reagents for at least 1000 tests with at least 4 months shelf life. 18) CD3 reagents for at least 500 tests with at least 4 months shelf life. 19) At least 20 control samples for each kind. Reference Producer and Model: BD – Facscount. SECTION V – SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 3 of 51 ITB-HTOC-77684-13-16153(MS) Lot A-7: Laboratory Equipment Item A-7.02 Analyzers, Laboratory, Bloodgas/pH/Electrolyte Analyzer to measure blood gas, electrolytes, PH, the, Oxygen saturation and Hct in human blood and dialysis solutions with acetate and bicarbonate content. Electrical characteristics 1) A 120V, 60Hz mono-phase electrical source with line connection plug NEMA 5-15 type 2) Protections against over-voltage and over-current line conditions 3) Compliance with applicable Haitian standards and regulations. 4) Uninterruptible Power Supply (UPS) system with not less than 20 minutes of back-up. Operational characteristics 1) Included trolley with brakes, able to carry the analyzer and his UPS. 2) All software in French language. 3) Relevant diagnosis of acid base status by means of printer. 4) Working temperature: 37°C. 5) Thermal printer and alphanumeric display. 6) Productivity of at least 50 samples/hour 7) Fully automatic, auto-calibrating, no sample pre-treatment, auto-sampling, auto-diluting, temperature controlled. 8) Barcode reader. Required parameters and required minimum measurement ranges 9) PO2, range 0 to 800 mm Hg. 10) PCO2, range 4 to 200 mm Hg. 11) PH, range 6 to 8. 12) Na, range 20 to 250 mmol/lt. 13) K+, range 0 to 20 mmol/lt. 14) Cl, range 20 to 250 mmol/lt. 15) Ca2+, range 0 to 4 mmol/lt. 16) Hct, range 10 to 80%. 17) tHb, Whole blood range 0 to 25g/dl. 18) SO2, Whole blood range 50 to 100%. Additional consumables and accessories to be included in the bid price; quote each separately: 19) Built in or external thermal printer. 20) Sample preparation stand. 21) At least 20 control samples for each kind. 22) Set of reagents and consumables to completely carry out each one of the analysis above listed for at least 200 times (complete analyses) including the replacement electrodes if bundled with at least 4 months shelf life. SECTION V – SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 4 of 51 ITB-HTOC-77684-13-16153(MS) Lot A-7: Laboratory Equipment Item A-7.03 Analyzers, Laboratory, Chemistry Automatic quantitative biochemistry analyzer with potentiometric (direct ISE), colorimetric, immunometric and turbidimetric assays. Electrical characteristics 1) A 120V, 60Hz mono-phase electrical source with line connection plug NEMA 5-15 type 2) Protections against over-voltage and over-current line conditions 3) Compliance with applicable Haitian standards and regulations. 4) Uninterruptible Power Supply (UPS) system with not less than 30 minutes of back-up. Operational characteristics 5) Fully automatic, auto-calibrating, no sample pre-treatment, auto-sampling, auto-diluting, with incubator. 6) Built-in or external display and workstation or control panel; input/output devices and data import/export capability in standard formats, for data management and transfer. 7) Integrated or external USB connected printer for complete patient data analysis, graphs and results printing in a standard clinical format. 8) Integrated barcode reader for both samples and reagents identification. 9) Equipment software control of maintenance operations. 10) Patient data, results of the analysis, calibrations and Quality Control (QC) results storage capacity for at least 10.000 patient samples. 11) Automatic or on-request results printouts. 12) On-line help always accessible from the user-interface. 13) Pre-sets and user-defined procedures and parameters sets. 14) Measurement principles: Potentiometric (direct ISE), Colorimetric/Rate, Immuno-rate, Turbidimetric. 15) Electrode shelf life for potentiometric measurement not less than 25000 samples. 16) Coagula detection system. 17) Automatic linear, non-linear or bias calibrations with automatic calibration repeat for bias calibration and equipment stably calibrated for not less than 14 continuous days. 18) The equipment should allow urgent analysis without interrupting the standard routine analysis. 19) Throughput not less than 250 tests/hour for both ISE and photometric methods. 20) Total throughput: of at least 400 tests/hour; complete ISE set in less than 30 min. 21) At least 30 photometric test methodologies available. 22) At least kinetic and end-point measurement modes. 23) Spectrum analysis range not smaller than 340 to 750 nm. 24) Kinetic measurement in not less than 12 points in a time range not smaller than 20 seconds to 59 minutes. 25) Pre aligned quartz halogen light source with linear absorbance range not smaller 0 to 2.5 Abs, resolution of at least 0.0001, accuracy at least of +/- 2% and reproducibility with SD not greater than 0.005 at 2 Abs. 26) The sample handler must allow the both manual and automatic samples recognition. 27) Stand-by mode to minimize reagents consumption. 28) Distilled Water Consumption less than 20 lt/hour.