12-key Network Remote Pad VPK312 User Manual www.aten.com VPK312 User Manual EMC Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. CE Warning: Operation of this equipment in a residential environment could cause radio interference. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Suggestion: Shielded twisted pair (STP) cables must be used with the unit to ensure compliance with FCC & CE standards. Achtung: Der Gebrauch dieses Geräts in Wohnumgebung kann Funkstörungen verursachen. RoHS This product is RoHS compliant. ii VPK312 User Manual User Information Online Registration Be sure to register your product at our online support center: International http://eservice.aten.com Telephone Support For telephone support, call this number: International 886-2-8692-6959 China 86-400-810-0-810 Japan 81-3-5615-5811 Korea 82-2-467-6789 North America 1-888-999-ATEN ext 4988 1-949-428-1111 User Notice All information, documentation, and specifications contained in this manual are subject to change without prior notification by the manufacturer. The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer's software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its dealer), assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software. The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modifications to this device. It is the responsibility of the user to correct such interference. The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE. iii VPK312 User Manual Package Contents 1 VPK312 12-key Network Remote Pad 1 Faceplate 1 Pack of Button Caps 1 Power Adapter 1 2-pole Terminal Block 1 User Instructions Note: Make sure that all of the items are present and in good order. If anything is missing or was damaged in shipping, please contact your dealer for further assistance. iv VPK312 User Manual Contents EMC Information. ii RoHS . ii User Information . .iii Package Contents . .iv About this Manual . .vi Conventions . vii Product Information . vii 1. Introduction and Getting Started Overview. 1 Features . 1 Getting Started Tasks . 2 2. Hardware Setup Components . 3 Installation . 5 Installing a Terminal Block to a Power Adapter . 6 3. Administrator Settings Overview. 7 Login . 7 Supported Web Browsers . 7 Logging in via Host Presentation Switch . 8 Logging in by Typing Remote Pad’s IP Address . 9 The Remote Pad’s IP Address . 9 Configuring the Key Layout . 10 Exporting and Importing Layout . 11 Firmware Upgrades . 12 Configuring the Network Settings . 12 Web Console. 12 IP Installer Utility . 13 Restoring System Defaults . 13 Appendix Safety Instructions . 15 General . 15 Technical Support . 17 Specifications . 18 CAD Diagrams . 19 Panel Mount Cutout Diagram . 22 Limited Warranty . 23 v VPK312 User Manual About this Manual This user manual is provided to help you get the most from the Remote Pad unit. It covers all aspects of installation, configuration, and operation. An overview of the information found in the manual is provided below. Chapter 1, Introduction and Getting Started introduces you to the 12-key Network Remote Pad. Its purpose, features, benefits, and getting-started tasks are described. Chapter 2, Hardware Setup introduces the panel components of the 12-key Network Remote Pad and the steps to quickly and safely set up the device. Chapter 3, Administrator Settings provides information about configuring the Remote Pad’s key layout and its system settings. Appendix provides a list of safety instructions and precautions, contact information for ATEN technical support, product specifications, and other technical information. Note: Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit or any connected devices. ATEN regularly updates its product documentation for new features and fixes. For an up-to-date Remote Pad documentation, visit http://www.aten.com/global/en/ vi VPK312 User Manual Conventions This manual uses the following conventions: Monospaced Indicates text that you should key in. [ ] Indicates keys you should press. For example, [Enter] means to press the Enter key. If keys need to be chorded, they appear together in the same bracket with a plus sign between them: [Ctrl+Alt]. 1. Numbered lists represent procedures with sequential steps. ♦ Bullet lists provide information, but do not involve sequential steps. → Indicates selecting the option (on a menu or dialog box, for example), that comes next. For example, Start → Run means to open the Start menu, and then select Run. Indicates critical information. Product Information For information about all ATEN products and how they can help you connect without limits, visit ATEN on the Web or contact an ATEN Authorized Reseller. Visit ATEN on the Web for a list of locations and telephone numbers: International http://www.aten.com North America http://www.aten-usa.com vii VPK312 User Manual This Page Intentionally Left Blank viii Chapter 1 Introduction and Getting Started Overview The VPK312 is a 12-key, network-based remote pad designed for operation control of ATEN Presentation Switches. The VPK312 Remote Pad offers an intuitive control interface of ATEN Presentation Switches using a wall- mountable keypad. Created with flexibility in mind, the key layout is made customizable to meet different application requirements. Configuring the Remote Pad is easy. Simply pair the Remote Pad with a Presentation Switch and assign key functions via the web consoles. With up to 6 Remote Pads allowed for one Presentation Switch, the Remote Pad provides an scalable and affordable control of Presentation Switches and is perfect for any meeting room, class room, or lecture room. Features 12-key Network Remote Pad for ATEN Presentation Switches Easy paring with a Presentation Switch via the Presentation Switch’s web console Simple configuration via the web GUI Fully customizable for the functions and layout of the keys Dual-color button LEDs for clear indication and visibility Power redundancy supported when both DC power and Power over Ethernet (PoE) are supplied Convenient reset of system and network settings using the built-in reset button Firmware upgradable Engraved buttons for intuitive port indication and operation Note: For a list of compatible products, visit the product web page. 1 Chapter 1. Introduction and Getting Started Getting Started Tasks Refer to the following table for a list of getting started tasks. Getting Started Tasks Step-by-step Instructions 1. Preparation: - Decide an installation location for your Remote Pad. Obtain login credentials of the Presentation Switch. 2. Install your Remote Pad. See Installing the Remote Pad, page 5 3. Pair the Remote Pad with a Presentation See the user manual of the host Switch via the Presentation Switch’s web Presentation Switch. console. 4. Configure key functions via the Presentation See Configuring the Key Layout, Switch or the Remote Pad’s web console. page 10. 2 Chapter 2 Hardware Setup 1. Please review the safety information regarding the placement of this device in Safety Instructions, page 15. 2. Do not power on the VPK312 until all the necessary hardware is connected. Components This section provides an overview of the VPK312’s hardware components, their locations and functions. 4 5 1 3 2 96.9 mm 37.3 mm 51.95 mm 3 Chapter 2. Hardware Setup No. Component Description 1 Button & Status LED Press to turn the function on/off. The LED indicates status of the function: lights white when the function is enabled lights orange when the function is available dims when the function is not available 2 Network LED Lights orange and white to indicate network connectivity. 3 Reset Button To reset network settings to defaults, press the reset button once. To reset system settings (except for network settings) to defaults, press and hold the reset button for 5 seconds. 4 Ethernet Port Connects to a network switch via an Ethernet cable to allow access to the web console. 5 DC Power Port Connects to a DC power jack. For details on how to replace the power jack with a terminal block, see Installation, page 5. 4 VPK312 User Manual Installation Installing the Remote Pad Follow the steps below to safely install the Remote Pad. Wall Box (Not included in package) 1 3 5 2 6 4 1. Prepare the installation site. a) Refer to the Panel Mount Cutout diagram (page 22) to cut out an opening to accommodate the Remote Pad and the connected cables.