Compact Disc Player C-7000R

Compact Disc Player C-7000R

Compact Disc Player C-7000R Instruction Manual En Introduction WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within CAUTION: the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a risk of electric shock to DO NOT REMOVE COVER (OR BACK). NO persons. USER-SERVICEABLE PARTS INSIDE. REFER The exclamation point within an equilateral triangle is SERVICING TO QUALIFIED SERVICE intended to alert the user to the presence of important PERSONNEL. operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Read these instructions. 12. Use only with the cart, stand, PORTABLE CART WARNING require extensive work by a qualified technician to 2. Keep these instructions. tripod, bracket, or table restore the apparatus to its normal operation, 3. Heed all warnings. specified by the manufacturer, E. If the apparatus has been dropped or damaged in 4. Follow all instructions. or sold with the apparatus. any way, and 5. Do not use this apparatus near water. When a cart is used, use F. When the apparatus exhibits a distinct change in 6. Clean only with dry cloth. caution when moving the performance this indicates a need for service. 7. Do not block any ventilation openings. Install in cart/apparatus combination to 16. Object and Liquid Entry accordance with the manufacturer’s instructions. avoid injury from tip-over. S3125A Never push objects of any kind into the apparatus 8. Do not install near any heat sources such as radiators, 13. Unplug this apparatus during lightning storms or when through openings as they may touch dangerous heat registers, stoves, or other apparatus (including unused for long periods of time. voltage points or short-out parts that could result in a amplifiers) that produce heat. 14. Refer all servicing to qualified service personnel. fire or electric shock. 9. Do not defeat the safety purpose of the polarized or Servicing is required when the apparatus has been The apparatus shall not be exposed to dripping or grounding-type plug. A polarized plug has two blades damaged in any way, such as power-supply cord or splashing and no objects filled with liquids, such as with one wider than the other. A grounding type plug plug is damaged, liquid has been spilled or objects vases shall be placed on the apparatus. has two blades and a third grounding prong. The wide have fallen into the apparatus, the apparatus has been Don’t put candles or other burning objects on top of blade or the third prong are provided for your safety. exposed to rain or moisture, does not operate this unit. If the provided plug does not fit into your outlet, normally, or has been dropped. 17. Batteries consult an electrician for replacement of the obsolete 15. Damage Requiring Service Always consider the environmental issues and follow outlet. Unplug the apparatus from the wall outlet and refer local regulations when disposing of batteries. 10. Protect the power cord from being walked on or servicing to qualified service personnel under the 18. If you install the apparatus in a built-in installation, pinched particularly at plugs, convenience receptacles, following conditions: such as a bookcase or rack, ensure that there is and the point where they exit from the apparatus. A. When the power-supply cord or plug is damaged, adequate ventilation. 11. Only use attachments/accessories specified by the B. If liquid has been spilled, or objects have fallen Leave 20 cm (8") of free space at the top and sides and manufacturer. into the apparatus, 10 cm (4") at the rear. The rear edge of the shelf or C. If the apparatus has been exposed to rain or water, board above the apparatus shall be set 10 cm (4") D. If the apparatus does not operate normally by away from the rear panel or wall, creating a flue-like following the operating instructions. Adjust only gap for warm air to escape. those controls that are covered by the operating instructions as an improper adjustment of other En controls may result in damage and will often 2 Precautions 1. Recording Copyright—Unless it’s for personal use 7. Never Touch this Unit with Wet Hands—Never 10. Moisture Condensation only, recording copyrighted material is illegal without handle this unit or its power cord while your hands are Moisture condensation may damage this unit. the permission of the copyright holder. wet or damp. If water or any other liquid gets inside Read the following carefully: 2. AC Fuse—The AC fuse inside the unit is not user- this unit, have it checked by your Onkyo dealer. Moisture may condense on the lens of the optical serviceable. If you cannot turn on the unit, contact 8. Handling Notes pickup, one of the most important parts inside this your Onkyo dealer. • If you need to transport this unit, use the original unit. 3. Care—Occasionally you should dust the unit all over packaging to pack it how it was when you originally • Moisture condensation can occur in the following with a soft cloth. For stubborn stains, use a soft cloth bought it. situations: dampened with a weak solution of mild detergent and • Do not leave rubber or plastic items on this unit for – The unit is moved from a cold place to a warm water. Dry the unit immediately afterwards with a a long time, because they may leave marks on the place. clean cloth. Don’t use abrasive cloths, thinners, case. – A heater is turned on, or cold air from an air alcohol, or other chemical solvents, because they may • This unit’s top and rear panels may get warm after conditioner is hitting the unit. damage the finish or remove the panel lettering. prolonged use. This is normal. – In the summer, when this unit is moved from an 4. Power • If you do not use this unit for a long time, it may not air conditioned room to a hot and humid place. WARNING work properly the next time you turn it on, so be – The unit is used in a humid place. BEFORE PLUGGING IN THE UNIT FOR THE sure to use it occasionally. • Do not use this unit when there’s the possibility of FIRST TIME, READ THE FOLLOWING SECTION • When you’ve finished using this unit, remove all moisture condensation occurring. Doing so may CAREFULLY. discs and turn off the power. damage your discs and certain parts inside this unit. AC outlet voltages vary from country to country. 9. Installing this Unit If condensation does occur, unplug the power cord Make sure that the voltage in your area meets the • Install this unit in a well-ventilated location. and leave the unit for two to three hours in the room voltage requirements printed on the unit’s rear panel • Ensure that there’s adequate ventilation all around temperature. (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz). this unit, especially if it’s installed in an audio rack. The power cord plug is used to disconnect this unit If the ventilation is inadequate, the unit may from the AC power source. Make sure that the plug is overheat, leading to malfunction. readily operable (easily accessible) at all times. • Do not expose this unit to direct sunlight or heat sources, because its internal temperature may rise, Some models have a voltage selector switch for shortening the life of the optical pickup. compatibility with power systems around the world. • Avoid damp and dusty places, and places subject to Before you plug in such a model, make sure that the vibrations from loudspeakers. Never put the unit on voltage selector is set to the correct voltage for your top of, or directly above a loudspeaker. area. • Install this unit horizontally. Never use it on its side Pressing the [POWER] button to select OFF mode or on a sloping surface, because it may cause a does not fully disconnect from the mains. If you do malfunction. not intend to use the unit for an extended period, • If you install this unit near a TV, radio, or VCR, the remove the power cord from the AC outlet. picture and sound quality may be affected. If this occurs, move this unit away from the TV, radio, or 5. Preventing Hearing Loss VCR. Caution Excessive sound pressure from earphones and headphones can cause hearing loss. 6. Batteries and Heat Exposure Warning Batteries (battery pack or batteries installed) shall not be exposed to excessive heat as sunshine, fire or the like. En 3 This unit contains a semiconductor laser system and is is encouraged to try to correct the interference by one or For British models classified as a “CLASS 1 LASER PRODUCT”. So, to use more of the following measures: Replacement and mounting of an AC plug on the power this model properly, read this Instruction Manual • Reorient or relocate the receiving antenna. supply cord of this unit should be performed only by carefully. In case of any trouble, please contact the store • Increase the separation between the equipment and qualified service personnel. where you purchased the unit. receiver. To prevent being exposed to the laser beam, do not try to • Connect the equipment into an outlet on a circuit IMPORTANT open the enclosure.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    36 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us