IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY Cabrillo Cove Ceiling Fan with Cabrillo Cove Ceiling Fan with Tropical Blades Paddle Blades Tommy Bahama INDOOR/OUTDOOR 52 in. / 132 cm. CABRILLO COVE CEILING FAN Net Weight: 31.0 lb. / 14.1 kg. Questions, problems, missing parts? Before returning to the store call Emerson Customer Service 8 a.m. - 8 p.m., CST, Monday - Friday 1-800-654-3545 Email Help - [email protected] Part No. F40BP74960000 Form No. BP7496 Revision - 140729 Model No.: TB135 Table of Contents Safety Warning. 3 1. Preparation . 4 2. Ceiling Fan Location . 5 3. Electrical Requirements . 6 4. How to Assemble Your Ceiling Fan . 7-12 5. How to Remove the Light Kit from the Fan . 13-15 6. How to Assemble Your Light Kit . 16-17 7. How to Hang Your Ceiling Fan . 18-19 8. How to Wire Your Ceiling Fan. 20-24 9. Installation of the Ceiling Cover. 25-26 10. Installation of Glass Shade . 27-28 11. Transmitter Battery Installation and Code Setting. 29-31 12. Receiver Code Leaning - Programming the Operating Frequency of the Receiver. 32 13. Operation of Remote Control . 33 14. Installation of the Storage Bracket . 34 15. Using Your Ceiling Fan . 35-36 16. Interchanging Fan Blades on Installed Fan . 37-38 17. Trouble Shooting. 39 18. Remote Control Trouble Shooting. 40 19. Maintenance . 41 20. Digital Device Warning. 41 21. Repair Parts . 42-43 Warranty . 44 Tommy Bahama • 07/20142 [email protected] • 1-800-654-3545 READ AND SAVE THESE INSTRUCTIONS ! WARNING WARNING: TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: a. Use this unit only in a manner intended by the manufacturer. If you have questions, contact the manufacturer, 1-800-654-3545. b. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 1. Read your owner’s manual carefully and keep it for future reference. 2. Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off the power to the ceiling fan before servicing. 3. Do not put anything into the fan blades while they are turning. 4. Do not operate reversing switch until fan blades have come to a complete stop. Additional Safety Instructions for Installation 1. To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan without blades. 2. The installation is to be in accordance with the National Electrical Code, ANSI/NFPA 70-2011 and Local Codes. Use the National Electrical Code if Local Codes do not exist. The ceiling fan must be grounded as a precaution against possible electrical shock. Electrical installation should be made or approved by a licensed electrician. 3. The outlet box and joist must be securely mounted and capable of reliably supporting at least 50 lb. / 23 kg. Use only U.L. outlet boxes listed as “Acceptable for Fan Support of 35 lb. / 16 kg. or less”, and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt. 4. The fan must be mounted with the fan blades at least 7 ft. / 2.1 m. from the floor to prevent accidental contact with the fan blades. 5. Follow the recommended instructions for the proper method of wiring your ceiling fan. If you do not know enough about electrical wiring, have your fan installed by a licensed electrician. WARNING: To reduce the risk of electrical shock, this fan must be installed with an isolating wall control/switch. A standard wall switch meets this requirement. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. Solid-state speed controls cannot meet the requirements of wet location usage, consult Emerson customer service, 1-800-654-3545 for further assistance. NOTE: If replacing the original supplied light kit, use only light kits marked “Suitable for use in wet locations”. CAUTION: To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before installing light kit. WARNING: To avoid fire or electric shock, this fan should only be used with fan speed control Model No. UC7067RYA, manufactured by Rhine Electric Co., Ltd. WARNING: This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. WARNING: To reduce the risk of personal injury, do not bend the blade holders when installing the blade holder assemblies, balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades. NOTE: All setscrews must be checked and re-tightened where necessary before installation (See Section 4). NOTE: Suitable for use in wet locations when installed in a GFCI protected branch circuit. DATE CODE: The date code of this fan may be found on the box, stamped in ink on a white label. You should record this data above and keep it in a safe place for future use. Tommy Bahama • 07/20143 [email protected] • 1-800-654-3545 1. Preparation 1.1 1.2 Thank You for Your Purchase Use of This Manual Your Tommy Bahama Ceiling Fan is the right choice for Read the entire manual before installation. This manual your home or office. We take pride in providing you with will help you install, operate and maintain your ceiling fan. an efficient, reliable and excellent craftsmanship product These instructions are designed to make installation and for years to come. assembly as simple and efficient as possible. Each step has three components: Before Installation 1. Each step has a number for ease of step by step instructions. This fan is suitable for wet locations such as 2. Text instructions above each illustration describes the porches, patios, and decks. procedure for each step. Wiring, outlet box and box connectors must be of type 3. Each assembly illustration is marked with component required by the local code. The minimum wire would be a identification number that corresponds to the Hardware 3-conductor (2-wire with ground) of the following sizes: Guide included with this ceiling fan.. Lower case letters refer to components removed from pre-assembled parts. Installed Wire Length Wire Size A.W.G. Up to 50 ft. / 15.2 m. 14 Tools Required 50-100 ft. / 15.2-30.4 m. 12 ! WARNING Before assembling your ceiling fan, refer to section on proper method of wiring your fan. If you feel you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician. Phillips Small Flat Blade Wire Step 14 mm Box Screwdriver Screwdriver Stripper Ladder Wrench 1.3 1.4 Unpacking Instructions Optional Accessories ! WARNING Tommy Bahama has optional accessories, including wall controls or remote control devices for your ceiling fan. Do not install or use fan if any part is damaged or missing. For free replacement parts Call Toll-Free: 1. To order Remote Wall Control TBSW102, go to: 1-800-654-3545 www.emersonacp.com/FansStore/home.do. 2. To order an additional Handheld transmitter TBSR135, go to: www.emersonacp.com/FansStore/home.do. Open the fan carton and carefully remove all the components packed inside the upper and lower styrofoam ! pads. Place all parts on a soft surface to prevent scratching WARNING the painted finish. Please set aside the styrofoam pads as The use of any other control not specifically approved these will be used later during assembly. for this fan could result in fire, shock and personal injury. Refer to the separate Parts/Hardware Guide and check that you have received all hardware and ceiling fan ! components. Call Emerson Customer Service at WARNING 1-800-654-3545 if any hardware or components are This product is designed to use only those parts missing from the carton. New parts will be shipped free of supplied with this product and/or any accessories charge. designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. Tommy Bahama • 07/20144 [email protected] • 1-800-654-3545 2. Ceiling Fan Location 2.1 2.2 Standard 8 Ft. / 2.4 m. Ceilings Ceilings 9 F.t / 2.7 m. and Higher Use the Supplied 4.5 in. /11.4 cm. Downrod Use the Supplied 18 in. / 45.7 cm. Downrod For Installation For Installation Your Tommy Bahama Ceiling Fan is designed for flat, On flat high ceilings, use the 18 in. / 45.7 cm. downrod standard 8 ft. / 2.4 m. ceilings, even when a light kit is (supplied) to achieve the optimum installation height. utilized. When installed, the blades should be at least 7 ft. / 2.1 m. from the floor. Contact Emerson Customer Service at 1-800-654-3545 if you have a sloped ceiling. CEILING CEILING 18" MIN. 18" MIN. 30 in. / MIN. MIN. 30 in. / 76.2 cm. 76.2 cm. MIN.7' 7 ft.