LANactive Switch to the future Future Proof Fibre To The Office Solutions Future proof LAN Solutions based on fibre The number of applications on a network If the following aspects are relevant for you increases from year to year. New applicati- in network planning, then fibre optic net- ons are permanently in preparation. Server works are ideal for you! Virtualization, Cloud Computing, IP-telephony, video conferences, Blade servers are only some • Future-proof of the drivers for ever increasing bandwidth. (Scalable, flexible, sustainable) • Investment protection/life cycle A scalable infrastructure forms the basis to • Secure network guarantee the network performance, for • Low maintenance cost/ today’s and tomorrow’s applications. simple administration • Low investment cost Due to the on demand scalability, fibre is the • Quick and simple realization best medium. The Fibre To The Office (FTTO) • Low energy consumption concept combines the advantages of fibre with the requirements for flexibility, cost-efficieny and interoperability of modern enterprise networks. LANactive Comparison of the Cabling Structures Structured cabling (copper based) By using fibre cabling, no limit at 90m! Structured No need for floor distributors between Fibre To The Office the central and the user ports! cabling (fibre based) In fibre-based structured cabling, fibre is distributed to the workplace (connection point). By using fibre optic lengths of 550 meters and more can be bridged, avoiding floor distributors. At the workplace, the media conversion from copper to fibre occurs via intelligent Fibre To The Office (FTTO) microswit- ches, which are permanently installed in the cable channel or in the floor box. Up to four connected twisted pair devices such as PCs, laptops, IP phones can be connected with full Gigabit performance via the microswitch to one fibre port. The devices can also be supplied with Power over Ethernet (PoE) via the data ports of the microswitch. + Simple and flexible network structure + No need for floor distributors + Low cable volume and fire loading + Future-proof Fibre Optic Cabling with high bandwidth reserve + No grounding or problematic earthing + Simple redundancy up to the network outlet + Low TCO (Total Cost of Ownership) LANactive LANactive Switch to the future Cost effectiveness Save 30 % and more compared to an established network With Fibre To The Office concept, up to users CAPEX* are connected to 1 central port: this 1 to ratio (Capital expenditure) increases the cost-efficiency of the network. That's why in most cases, FTTO is significantly less expen- -30% (typical) sive than comparable established networks based Established Network on copper. This, combined with the significantly Designs FTTO lower installation and operation costs makes the Network LANactive FTTO solution highly competitive. *typical >200 Ports * Includes: Active and passive components, installation services and building costs CAPEX (Capital expenditure) Due to the use of fibre as a medium, FTTO infra- OPEX* (Operational expenditure) structures mean future proof networks and the highest investment protection. Compared to a tra- -35% (typical) ditional copper cabling, the acquisition and instal- lation costs are significantly lower. Fibre-based Established Network Designs infrastructures with a real lifetime of more than 5 FTTO Network years are not uncommon. OPEX (Operational expenditure) * Includes: Services for Infrastructure, Network Management Costs, Care Packs, Repair Services Thanks to the centralised structure of FTTO which makes the floor distributors unnecessary, the ser- Initial installation time vice of the network is greatly simplified and the service costs are significantly reduced. The service costs for the attendance and maintenance of air- Established -60% (typical) conditioning, fire protection, uninterruptible power Network Designs supplies etc. on the floors can be avoided. FTTO Network LANactive 5 In addition to the savings on the investment Regardless of all the advantages of a structured side, acquiring a fibre optic infrastructure brings fibre-optic cabling, the decisive criterion often many more benefits thanks to the cost-optimised remains the cost of the complete infrastructure. service and handling of the network. By including spare reserves of accessible fibre Fibre based infrastructure are 20-40% more at low cost, network changes or new connec- cost effective tion points can be added without disruption to During recent years the cost comparison has existing services or users. This minimises any changed significantly. Infrastructures based on possible operation or production losses that can future-proof fibre optic are usually 0-0% result while extending the network. cheaper than an established network design, whether it is a complete new construction or a network refurbishment. Accurate cost saving estimates for specific projects can be calculated after inspection of local conditions and requirements. LANactive FTTO Cabling Technologies by using pre-terminated assemblies For large FTTO installations with a lot of fibre terminations pre-terminated solutions are often used to meet stringent project time requirements. The Pre-Term consists of a full dielectric round cable that has been terminated with LC connectors on both sides. The cable is waterproof, rodent retardant and UV stabilized. A high density fibre optic-cable is installed from the central distributor to a junction box on the floor. From here, the workplaces are connected via or fibres. The connection in the zone distri- bution box is spliced and the links to the workplaces use pre-assembled patch cords. Benefits • Short & reliable manufacturing lead-time • Fast installation times • No specialised termination training required • No consumables, termination tool kits • No cable preparation necessary • No cable or connector scrap • No termination errors on site • Delivered fully tested, labelled and documented • High performing connectors: Max IL 0.5dB Factory Pre-terminated assembly (up to fibers) Duplex Patch Cord Zone Distribution Duplex Patch Cord Box FTTO Switch FTTO Switch FTTO Switch TO Switc FT h FTTO Switch FTTO Switch LANactive FTTO Cabling Technologies Fibre Extraction By using new cable solutions like high density fibre optic cables with extractable bundle technology, the required effort for the cable installation decreases considerably whilst providing redundancy. A high density fibre cable (up to 1 fibres) can be drawn in a loop through the selected parts of the buil- ding. At any location of the cable, future zone distribution points can be added allowing new outlets to be connected via pre-assembled fibre optic cables. Benefits • Maximum flexibility of the infrastructure • Easy scalability • Cost effective • Minimum cable volume • Maximum network availability by using ring topologies • Highly cost effective solution Extractable Cable (up to 1 fibers) Micro Bundle (up to 1 fibers) Zone Distribution Box FTTO Switch FTTO Switch FTTO Switch TO Switc FT h FTTO Switch FTTO Switch FTTO Switch LANactive FTTO Cabling Topologies without Redundancy Pre-Terminated - Physical Star Structure without Redundancy Characteristics/Benefits • 1 building distributor • Connection in a Star pattern • No redundancy • Pre-termimated fibre assembly (up to fibres) between building distributor and zone distribution boxes • Short installation time • High flexibility for future adds and changes • Pre-assembled patch cords to the workplaces (microswitches) Building Distributor 1 Fibre Extraction - Physical Ring Structure without Redundancy Characteristics/Benefits • 1 Building distributor • Connection in a Star pattern • No Redundancy • Up to 5 active user ports with only one cable • Short installation time • High flexibility of the infrastructure • Easy scalability • Minimum cable volume • Highly cost effective solution Building Distributor 1 LANactive FTTO Cabling Topologies with Redundancy Pre-Terminated - Physical Star Structure with Redundancy Characteristics/Benefits • 2 Building distributors • Star connection with mini-rings of up to four microswitch systems • Redundancy = high availability of the network • Pre-termimated fibre assembly (up to fibers) between building distributor and zone distribution boxes • Short installation time • High flexibility for future adds and changes • Pre-assembled patch cords to the workplaces (microswitches) Building Distributor 1 Building Distributor Fibre Extraction - Physical Ring Structure with Redundancy Characteristics/Benefits • 2 Building distributors • Redundancy (Building distributors and work places) • Up to 115 active user ports with fully redundancy could be realised with only one cable • Star connection with mini-rings of up to four microswitch systems • Maximum flexibility of the infrastructure • Minimum cable volume • Maximum network availability by using ring topologies and fully redundancy (RSTP/MSTP) This type of cabling offers the most economic and safest cabling solution. • Highly cost effective solution Building Distributor 1 Building Distributor LANactive 10 Green IT FTTO makes your network get green The building sector in Europe is one of the major systems. The power consumption of a FTTO contributors to global warming and energy micro-switch is extremely low and FTTO net- consumption. This is why Europe has imple- works tends to be better optimised in terms of mented a “0-0-0” targets policy which aims installed active ports compared with the “unused at achieving by 00 20% reduction