www.fabriceditions.com Follow us here to see more exciting projects and ideas. STOCKING #mycreateit Finished Size: 10 in x 21 in (25.4 cm x 53.34 cm) Supplies Needed • 1 Yard Fabric Cut (36 in x 42 in / 91.44 cm x 106.68 cm) • Iron-On Appliqué • Coordinating thread • Removable marker • Tape • Scissors • Basic sewing supplies • Sewing machine • Iron, pressing surface and press cloth *Project made with these items from: (items sold separately) 588584189 – CI-FQ22-HOLWHM2 FQ22 HOLIDAY CHECK BLK 595341839 – CI-APPL22-TRUCK APPLIQUE TRUCK Before You Begin Read all instructions before beginning project. Before cutting, press fabrics with a dry iron on cotton setting. Use a ¼ in (3.81 mm) seam allowance and sew fabrics with right sides together (RST). Print the Stocking Templates (on page 4 – 9) at 100% scale. Cut and tape together. Follow manufacturer‘s instructions for appliqué. Cutting 1. Fold the 1 yard cut of fabric RST, matching selvage edges. Position Stocking pattern on fabric as shown in Diagram A. Trace around pattern, pin and cut out matching pairs, leaving pairs layered for sewing. One pair will be the Stocking Front and Lining while the other pair will be the Stocking Back and Lining. Dia. A 42 in (106.68 cm) Fold RST 36 in = = (91.44 cm) Fold Black Check Cut 2 - Stocking templates © 2021 Fabric Editions, Inc. page 1 2. From the scraps of the Black Check, cut a 1 ½ in x 6 in (3.81 cm x 15.24 cm) strip for a Dia. B Hanging Loop (Dia B). Black Check (scraps) Cut 1 - 1 ½ in x 6 in (3.81 cm x 15.24cm) Strip Sewing 3. Stocking pieces are already layered RST for sewing. Ensure top edges are even, pin and sew (Dia. C). Press seams open. Dia. C Pin & sew Lining Front Stocking Front wrong side wrong side Lining Front Stocking Front = Lining Back Stocking Back Lining Back Stocking Back wrong side wrong side Press seams open 4. With RST, pin the pieces as shown in Diagram D aligning all edges and matching the center seams. Sew around outside edge, leaving a 4 in (10.16 cm) opening on the Lining side. Tip: Stitch slowly around curves. Dia. D Align center seams & edges Leave 4 in (10.16 cm) opening Lining Stocking Pin Sew 5. Turn right side out by pulling the Stocking through the opening; press if needed. Sew opening closed (Dia. E). Dia. E Lining Stocking Lining Turn right side out Sew opening closed 6. Push the Lining into the Stocking. Smooth inside toe, heel and around top edge. Fold the top edge over approximately 5 in (12.7 cm) to create the cuff (Dia. F). Dia. F Push lining into stocking www.fabriceditions.com page 2 Appliqués 7. Working on an ironing surface, place the Truck appliqué on cuff as shown. Once the appliqué is placed, follow pressing instructions below (Dia. G). 1. Set iron to hot, dry setting. 2. Place the appliqué in desired location and cover with a pressing cloth. 3. Press using a dry iron, applying light pressure on the appliqué for approximately 10 seconds to adhere appliqué into place. 4. To set appliqué, turn the Stocking cuff back up as shown. Iron back side of appliqué for approximately 30-45 seconds, applying firm pressure evenly to reinforce. Let cool and repeat step 4 if necessary. Dia. G 1. 2. Place appliqué 3. Iron 10 seconds 4. Iron Back 30-45 seconds Finishing 8. To make the Hanging Loop (1 ½ in x 6 in / 3.81 cm x 15.24 cm), fold wrong sides together so long edges meet. Press open and fold edges to the center crease; press. Fold in half again and topstitch close to the edges (Dia. H). Dia. H 6 in (15.24cm) 1 ½ in (3.81 cm) Crease Topstitch 9. Fold the Hanging Loop in half so cut edges meet. On the inside, pin to the center back of Dia. I Stocking at the top edge, as shown in Diagram I. Sew ¼ in (6.35 mm) from the edge, then again ½ in (1.27 cm) from the edge to hold in place. Hanging Loop Finished Care Instructions Spot clean as needed. www.fabriceditions.com page 3 Scale: Stocking Template 1 square = Cut out each part of the stocking template around the outer black line. Overlap the matching 1" x 1" gray borders and tape the parts together to make a full stocking template. 100% Scale. Match A Match Match B www.fabriceditions.com page 4 Scale: Stocking Template 1 square = Cut out each part of the stocking template around the outer black line. Overlap the matching 1" x 1" gray borders and tape the parts together to make a full stocking template. 100% Scale. Match A Match Match C www.fabriceditions.com page 5 Scale: Stocking Template 1 square = Cut out each part of the stocking template around the outer black line. Overlap the matching 1" x 1" gray borders and tape the parts together to make a full stocking template. 100% Scale. Match B Match D Match Match E www.fabriceditions.com page 6 Scale: Stocking Template 1 square = Cut out each part of the stocking template around the outer black line. Overlap the matching 1" x 1" gray borders and tape the parts together to make a full stocking template. 100% Scale. Match C Match D Match Match F www.fabriceditions.com page 7 Scale: Stocking Template 1 square = Cut out each part of the stocking template around the outer black line. Overlap the matching 1" x 1" gray borders and tape the parts together to make a full stocking template. 100% Scale. Match E Match G Match www.fabriceditions.com page 8 Scale: Stocking Template 1 square = Cut out each part of the stocking template around the outer black line. Overlap the matching 1" x 1" gray borders and tape the parts together to make a full stocking template. 100% Scale. Match F Match G Match www.fabriceditions.com page 9 www.fabriceditions.com Scale: Stocking Cu Guide 1 square = NOT PART OF STOCKING TEMPLATE. 1" x 1" Use this guide to test the placement of the appliqué. This guide represents the nished size of the cu at 100% scale. Cu Guide Top Cu Guide Bottom page 10.