OWNER’S/ OPERATOR’S MANUAL Tractor 3 pt. PTO MODEL NO.’s PTC-525 PTC-625 PTC-725 PTHD-640 PTHD-740 PTHD-840 CAUTION For Safe Operation Read Rules And Instructions Carefully Powered Rakes SI NO LEEINGLES, PIDA AYUDA A AIGUIEN QUE SI LO LEA Safety Instructions Assembly & Mounting PARA QUE LE TRADUZCA LAS Tractor Preparation Maintenance MEDIDAS DE SEGURIDAD. Operating Instructions Repair Parts CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE 1. Select an area for assembly that is clean and free of any 6. After completing assembly, thoroughly inspect the debris which might cause persons working on the machine to be sure that all nuts, bolts, hydraulic fittings assembly to trip. or any other fastened assemblies have been thoroughly 2. Do not lift heavy parts or assemblies. Use crane, jack, tightened. tackle, fork trucks or other mechanical devices. 7. Before operating the machine, thoroughly read the 3. Preview the assembly instructions in your operator’s operation section of your operator’s manual. manual before proceeding further. 8. Before operating, read the maintenance section of your 4. If the assembly instructions call for parts or assemblies to operator’s manual to be sure that any parts requiring be blocked up, use only blocking material that is in good lubrication, such as gearboxes, are full, to avoid any condition and is capable of handling the weight of the assembly to be blocked. Also insure that the blocking possible damage. material is on a clean, dry surface. 9. Before operating equipment – If you have any 5. Never put hands, or any part of body, under blocked up questions regarding the proper assembly or assemblies if at all possible. operation, contact your dealer or representative. SI NO LEEINGLES, PIDA AYUDA A TABLE OF CONTENTS AIGUIEN QUE SI LO LEA PARA QUE WARRANTY . 2 LE TRADUZCA LAS MEDIDAS DE SPECIFICATIONS . 3 SEGURIDAD. CHECK LISTS . 4 SAFETY INFORMATION . 5-15 SAFETY SIGNS . 16-17 STATEMENT PREPARATION INSTRUCTIONS . 18 OF POLICY ASSEMBLY/INSTALLATION . 19-21 It is the policy of Worksaver, ADJUSTING FOR WORK . 22-25 Inc. to improve its products where it is possible and practical to do OPERATING INSTRUCTIONS . 26-35 so. Worksaver, Inc. reserves the SERVICE & MAINTENANCE . 36-40 right to make changes or TROUBLE-SHOOTING GUIDE . 41-43 improvements in design and con- struction at any time, without PTC PARTS LISTS . 44-50 incurring the obligation to make PTHD PARTS LISTS . 52-63 these changes on previously OPTIONAL SIDE SHIELD EXTENSION KIT . 61 manufactured units. BOLT TORQUE CHART . 64 TO THE OWNER: Read this manual before using your Tractor 3 pt. Mounted Powered Rake. This manual is provided to give you the necessary operating and maintenance instructions for keeping your powered rake in top operating condition. Please read this manual thoroughly. Understand what each control is for and how to use it. Observe all safety signs on the machine and noted throughout the manual for safe operation of implement. Keep this manual handy for ready reference. Like all mechanical products, it will require cleaning and upkeep. Lubricate the Rake as specified. Use only genuine Worksaver/Site Pro service parts. Substitute parts will void the warranty and may not meet standards required for safe and satisfactory operation. Record the model and serial number of your Powered Rake here: Model:________________________________________ Serial Number:_______________________________ RETAIL CUSTOMER’S RESPONSIBILITY It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to operate, lubri- cate, maintain, and store the product in accordance with all instructions and safety procedures. Failure of the operator to read the Operator’s Manual is a misuse of this equipment. It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have any part(s) repaired or replaced when continued operation would cause damage or excessive wear to other parts or cause a safety hazard. It is the Retail Customer’s responsibility to deliver the product to the authorized Worksaver/Site Pro Dealer, from whom he purchased it, for service or replacement of defective parts which are covered by warranty. Repairs to be submitted for warranty consideration must be made within forty-five (45) days of failure. It is the Retail Customer’s responsibility for any cost incurred by the Dealer for traveling to or hauling of the product for the purpose of performing a warranty obligation or inspection. 1 LIMITED WARRANTY ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ Worksaver warrants its SitePro branded products to the original purchaser of any new tractor 3 pt. mounted, PTO driven, Powered Rake (Models PTC-525/625/725, PTHD-640/740/840), that the equipment be free from defects in material and workmanship for a period of one (1) year, the warranty period begins on the first occur- rence of (a) the date of initial purchase by an end-user (b) the date the product is first leased or rented and ends on the date that is twelve (12) months after the first occurrence. Replacement or repair parts installed in the equipment covered by this warranty are warranted for ninety (90) days from the date of purchase of such part or to the expiration of the applicable new equipment warranty period, whichever occurs later. Such parts shall be provided at no cost to the user during regular working hours. Worksaver reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship. DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES Worksaver’s obligation under this warranty, to the extent allowed by law, is in lieu of all warranties, implied or expressed, including implied warranties of merchantability and fitness for a particular purpose and any liabili- ty for incidental and consequential damages with respect to the sale or use of the items warranted. Such incidental and consequential damages shall include but not be limited to: transportation charges other than normal freight charges; cost of installation other than cost approved by Worksaver; duty; taxes; charges for normal service or adjustments; loss of crops or any other loss of income; rental of substitute equipment, expenses due to loss, damage, detention or delay in the delivery of equipment or parts resulting from acts beyond the control of Worksaver. THIS WARRANTY SHALL NOT APPLY: 1. To vendor items which carry their own warranties, such as hydraulic cylinders and hydraulic motor. 2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident. 3. If parts not made or supplied by Worksaver have been used in connection with the unit, if, in sole judge- ment of Worksaver such use affects its performance, stability, or reliability. 4. If the unit has been altered or repaired outside of an authorized Worksaver/SitePro dealership in a manner which, in the sole judgement of Worksaver affects its performance, stability or reliability. 5. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic fluid, worn teeth, or to normal deterioration of such things as belts and exterior finish, due to use or exposure. 6. To expendable or wear items such as teeth, chains, sprockets, springs and other items that in the compa- ny’s sole judgement is a wear item. Rotor assemblies are a wear item. NO EMPLOYEE OR REPRESENTATIVE OF WORKSAVER IS AUTHORIZED TO CHANGE THIS WARRAN- TY IN ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE IN WRITING AND SIGNED BY WORKSAVER’S SERVICE MANAGER, POST OFFICE BOX 100, LITCHFIELD, ILLINOIS 62056-0100. ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ ✯ 2 SPECIFICATIONS PTO POWERED RAKES PTC-525 PTC-625 PTC-725 PTHD-640 PTHD-740 PTHD-840 Non-Angled Working Width 60” 72” 84” 72” 84” 96” Angled Working Width 56.4” 67.7” 79” 67.7” 79” 90.2” Non-Angled Length 68.2” 68.2” 68.2” 81.5” 81.5” 81.5” Overall Height 36.8” 36.8” 36.8” 38.25” 38.25” 38.25” Machine Weight 785 lbs. 809 lbs. 833 lbs. 1,110 lbs. 1,160 lbs. 1,210 lbs. Hitch Cat. I Cat. I or II Approx. HP Required 20-30 hp 25-35 hp 30-40 hp 35-45 hp 38-48 hp 42-52 hp PTO Driveline Category 3, 540 rpm – Adjustable Slip Clutch Driveline Gearbox 540 rpm, Roller and Ball Bearings, Cast Iron Housing SAE 90 Weight Gear Lube – 1.7 L or 3.59 pints empty Gearbox Lubrication (Add gear lube until it escapes from lower plug hole.) #80 High Tensile Double #80 High Tensile Drive Chain Continuous Roller Chain Continuous Roller Chain “Aggressor” Rotor 10.125” Overall Dia. with 1.75” Carbide Tipped Teeth “Sabretooth” Rotor 10.625” Overall Dia. with 2.0” Alloy Steel Sabre Teeth Material Control Bar Adjustable Height Single Rubber Faced Bar Rotor Bearings 1½” Triple Sealed Roller Bearings Side Shields Quick-Flip Design – Flip Up & Lock with Pin Standard Angle Mechanical Angle – Straight, Left or Right Optional Angle Hydraulic Angle Kit #360915 Hydraulic Angle Kit #360905 Dual Pneumatic Tires / Spacer Height Adjustment / No. Gauge Wheels Gauge Wheels Flip Up & Lock Out of the Way 16.5 x 6.5 – 8 Pneumatic Tires 18.5 x 8.5 – 8 Pneumatic Tires Gauge Wheels Tapered Roller Bearing Hubs Tapered Roller Bearing Hubs Optional Shield Extension Skid Shield Extension Kit #360985 3 CHECKLISTS DELIVERY CHECKLIST DAILY CHECKLIST Inspect the powered rake thoroughly after assembly to ■ Check that the powered rake is properly and be certain it is set up properly. The following checklist is securely attached to the tractor. a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.