Command List CW-C6000/CW-C6500 Series M00119703 Rev. D Cautions 1. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. 2. The contents of this document are subject to change without notice. Please contact us for the latest information. 3. While every precaution has been taken in the preparation of this document, Seiko Epson Corporation assumes no responsibility for errors or omissions. 4. Neither is any liability assumed for damages resulting from the use of the information contained herein. Trademarks EPSON is a registered trademark of Seiko Epson Corporation. Exceed Your Vision and ESC/Label are registered trademarks or trademarks of Seiko Epson Corporation. Zebra Technologies Corporation and ZPL II are the registered trademarks or trademarks of Zebra Technologies Corporation. Other product and company names used herein are for identification purposes only and may be trademarks of their respective companies. ©Seiko Epson Corporation 2019-2020. All rights reserved. Epson ESC/Label Command List Alphabetical Order Rev. D About this document This document provides the command information indicated in the ESC/Label Command Reference Guide (Rev. E) listed alphabetically according to the command name and includes model information. Epson ESC/Label Command List Alphabetical Order Rev. D REVISION SHEET Revision Summary A Enactment B Added a column for factory-set initial values to the Command List Revised the insufficient descriptions in the corresponding ZPL column of the Command List ^S(CCA: Changed the initial value Alias for drive B: R→E ^S(CMF/~H(CMF: Added parameter Set backfeed procedure ^S(CMV: Changed the initial value Permitted clogged nozzle number: 2→6 ^S(CPC: Changed the parameter name Print quality: Standard→Normal ^S(CUL: Changed definition range Added Polish ^S(CUI/~H(CUI: Added parameter Enable/disable peeler reset button C ^BX: Changed definition range ~DY: Changed definition range Added extension UCL Added the ^H(E command Added the ^JC command Added the ^P(M command ^S(CMQ/~H(CMQ: Added parameter Added wait time adjustment after label peeling ^S(CUL/~H(CUL: Added parameter Deleted panel brightness Corrected List of Printer Errors in Appendix Table A-1 CS → CO D Correction of errors Epson ESC/Label Command List Alphabetical Order Rev. D Command List of the Alphabetical Order 1 "Priority" indicates the function is executed with priority. CW-C6500 series CW-C6000 series Function Corresponding ZPL II Command Command name Description Classification Command code Description of parameters Definition range for ESC/Label Factory-set Factory-set Priority 1 identifier Definition range Definition range command initial value initial value Font Sets the font used to render Text ^Afo,h,w f: Font identifier 0 ≤ f ≤ 9, Capital letter of the alphabet (A to Z) 0 ≤ f ≤ 9, Capital letter of the alphabet (A to Z) 0 ≤ f ≤ 9, Capital letter of the alphabet (A to Z) character strings in the field. o: Field orientation o = N/R/I/B o = N/R/I/B o = N/R/I/B N: Normal N: Normal N: Normal R: 90° rotation (clockwise) R: 90° rotation (clockwise) R: 90° rotation (clockwise) ^A I: 180° rotation I: 180° rotation I: 180° rotation ^A Low B: 270° rotation (clockwise) B: 270° rotation (clockwise) B: 270° rotation (clockwise) h: Character height [dot] 0 ≤ h ≤ 9999 0 ≤ h ≤ 3000 0 ≤ h ≤ 3000 w: Character width [dot] 0 ≤ w ≤ 9999 0 ≤ w ≤ 3000 0 ≤ w ≤ 3000 Font file Sets the font used to render Text ^A@o,h,w,d:f.x o: Field orientation o = N/R/I/B o = N/R/I/B o = N/R/I/B character strings in the field. N: Normal N: Normal N: Normal R: 90° rotation (clockwise) R: 90° rotation (clockwise) R: 90° rotation (clockwise) I: 180° rotation I: 180° rotation I: 180° rotation B: 270° rotation (clockwise) B: 270° rotation (clockwise) B: 270° rotation (clockwise) h: Character height [dot] 0 ≤ h ≤ 9999 0 ≤ h ≤ 3000 0 ≤ h ≤ 3000 w: Character width [dot] 0 ≤ w ≤ 9999 0 ≤ w ≤ 3000 0 ≤ w ≤ 3000 d: Font storage drive d = R/E/B/A/Z d = R/E/B/A/Z d = R/E/B/A/Z ^A@ Low ^A@ R: Volatile memory R: Volatile memory R: Volatile memory E: Non-volatile memory E: Non-volatile memory E: Non-volatile memory B: Optional memory B: Optional memory B: Optional memory A: Optional memory A: Optional memory A: Optional memory Z: Non-rewritable memory Z: Non-rewritable memory Z: Non-rewritable memory f: Font file name ASCII code within 8 characters ASCII code within 8 characters ASCII code within 8 characters x: Extension X = FNT/TTF/TTE/DAT X = FNT/TTF/TTE/DAT X = FNT/TTF/TTE/DAT Micro QR Code This command creates a Barcode ^B(Qo,v,s o: Micro QR Code field orientation o = N (Fixed) o = N (Fixed) o = N (Fixed) Micro-QR Code symbol with a N: Normal N: Normal N: Normal smaller symbol size than the v: Micro QR Code version v = 0/1/2/3/4 v = 0: Auto v = 0: Auto QR Code. 0: Auto 1: M1 (11 × 11) Low ^B(Q 2: M2 (13 × 13) 3: M3 (15 × 15) 4: M4 (17 × 17) s: Micro QR Code module size [dot] 1 ≤ s ≤ 99 1 ≤ s ≤ 20 1 ≤ s ≤ 20 GS1 Databar (HRI ^B(R command generates Barcode ^B(Ra,b,c,d,e,f,g a: Field orientation a = N/R/I/B a = N/R/I/B a = N/R/I/B character attachable) GS1 DataBar as well as ^BR N: Normal N: Normal N: Normal command. HRI character is R: 90° rotation (clockwise) R: 90° rotation (clockwise) R: 90° rotation (clockwise) attachable. I: 180° rotation I: 180° rotation I: 180° rotation B: 270° rotation (clockwise) B: 270° rotation (clockwise) B: 270° rotation (clockwise) b: Type of barcode or symbol 1 ≤ b ≤12 1 ≤ b ≤12 1 ≤ b ≤12 1: GS1 DataBar 1: GS1 DataBar 1: GS1 DataBar 2: GS1 DataBar Truncated 2: GS1 DataBar Truncated 2: GS1 DataBar Truncated 3: GS1 DataBar Stacked 3: GS1 DataBar Stacked 3: GS1 DataBar Stacked 4: GS1 DataBar Stacked Omnidirectional 4: GS1 DataBar Stacked Omnidirectional 4: GS1 DataBar Stacked Omnidirectional 5: GS1 DataBar Limited 5: GS1 DataBar Limited 5: GS1 DataBar Limited 6: GS1 DataBar Expanded 6: GS1 DataBar Expanded 6: GS1 DataBar Expanded 7: UPC-A 7: UPC-A 7: UPC-A 8: UPC-E 8: UPC-E 8: UPC-E ^B(R 9: EAN-13 9: EAN-13 9: EAN-13 Low 10: EAN-8 10: EAN-8 10: EAN-8 11: UCC/EAN-128 and CC-A/CC-B 11: UCC/EAN-128 and CC-A/CC-B 11: UCC/EAN-128 and CC-A/CC-B 12: UCC/EAN-128 and CC-C 12: UCC/EAN-128 and CC-C 12: UCC/EAN-128 and CC-C c: Magnification factor of barcode or 1 ≤ c ≤ 99 1 ≤ c ≤ 20 1 ≤ c ≤ 20 symbol d: Height of separator d = 1/2 d = 1/2 d = 1/2 e: Height of barcode part [dot] 1 ≤ e ≤ 32000 1 ≤ c ≤ 14400 1 ≤ c ≤ 14400 f: Number of segments 2 ≤ f ≤ 22, even numbers only 2 ≤ f ≤ 22, even numbers only 2 ≤ f ≤ 22, even numbers only g: Set/cancel of HRI character addition g = Y/N g = Y/N g = Y/N Y: Set Y: Set Y: Set N: Cancel N: Cancel N: Cancel Rev.D ESC/Label Command List SHEET1 Command List of the Alphabetical Order 1 "Priority" indicates the function is executed with priority. CW-C6500 series CW-C6000 series Function Corresponding ZPL II Command Command name Description Classification Command code Description of parameters Definition range for ESC/Label Factory-set Factory-set Priority 1 identifier Definition range Definition range command initial value initial value Set barcode printing Use the ^B(V command to Barcode ^B(Va a: Barcode printing validation function a = Y/N a = Y/N a = Y/N validation function enable/disable the barcode Y: Enabled Y: Enabled Y: Enabled Low ^B(V printing validation function. N: Disabled N: Disabled N: Disabled Aztec Code Sets the Aztec Code symbol Barcode ^B0o,m,e,t,i,n,id o: Aztec Code field orientation o = N/R/I/B o = N/R/I/B o = N/R/I/B to the field. N: Normal N: Normal N: Normal R: 90° rotation (clockwise) R: 90° rotation (clockwise) R: 90° rotation (clockwise) I: 180° rotation I: 180° rotation I: 180° rotation B: 270° rotation (clockwise) B: 270° rotation (clockwise) B: 270° rotation (clockwise) m: Aztec Code module size 1 ≤ m ≤ 99 1 ≤ m ≤ 20 1 ≤ m ≤ 20 e: Aztec Code extended channel e = Y/N e = N e = N interpretation (ECI) enabled/disabled Y: Enabled N: Disabled N: Disabled N: Disabled t: Aztec Code mode type and data layer t = 0 t = 0 t = 0 count 01 ≤ t ≤ 99 01 ≤ t ≤ 99 01 ≤ t ≤ 99 ^B0 Low ^B0 101 ≤ t ≤ 104 101 ≤ t ≤ 104 101 ≤ t ≤ 104 201 ≤ t ≤ 232 204 ≤ t ≤ 232 204 ≤ t ≤ 232 t = 300 i: Aztec Code leader initialization i = Y/N i = N i = N symbol Y: Yes N: No N: No N: No n: Number of symbols for structured 1 ≤ n ≤ 26 1 ≤ n ≤ 26 1 ≤ n ≤ 26 append with Aztec Code id: Aztec Code message ID ASCII code within 24 characters ASCII code within 24 characters ASCII code within 24 characters Interleaved 2 of 5 Sets Interleaved 2 of 5 Barcode ^B2o,h,i,a,c o: Interleaved 2 of 5 field orientation o = N/R/I/B o = N/R/I/B o = N/R/I/B barcode barcode to the field.