Page: 1 of 9 DRAFT ORDER FOR SUPPLIES OR SERVICES IMPORTANT: Mark all packages and papers with contract and/or order numbers. PAGE OF PAGES Page 1 1. DATE OF ORDER 2. CONTRACT NO.(If any) 6. SHIP TO: PR9812835, ASHGA 3. ORDER NO. 4. REQUISITION/REFERENCE NO. a. NAME OF CONSIGNEE PR9812835 ATTN: IKUN, LLC 5. ISSUING OFFICE (Address correspondence to) b. STREET ADDRESS 2801 ROUTE 130 UNIT 1 , c. CITY d. STATE e. ZIP CODE NORTH BRUNSWICK NJ 08902 Contact Name: Phone: f. SHIP VIA Email: 7. TO: 8. TYPE OF ORDER a. NAME OF CONTRACTOR CONTACT PHONE NUMBER a. PURCHASE ORDER b. DELIVERY ORDER -- Except for billing 0 REFERENCE YOUR: _______ instructions on the reverse, this delivery order is subject to instructions contained on this side DUNS NUMBER E-MAIL: Please furnish the following on the terms and conditions only of this form and is issued subject to the 0 FAX: specified on both sides of this order and on the attached sheet, terms and conditions of the above-numbered if any, including delivery as indicated. contract. b. COMPANY NAME NOVENDOR c. STREET ADDRESS d. CITY e. STATE f. ZIP CODE 10. REQUISITIONING OFFICE AMERICAN EMBASSY ASHGABAT 9.ACCOUNTING AND APPROPRIATION DATA ATTN: FM ------------------- $0.00USD 11. BUSINESS CLASSIFICATION (Check appropriate box(es)) 12. F.O.B. POINT a. SMALL b. OTHER THAN SMALL c. DISADVANTAGED Destination d. WOMEN-OWNED e. HUBZone f. SERVICE-DISABLED VETERAN-OWNED g. WOMEN-OWNED SMALL BUSINESS (WOSB) ELIGIBLE UNDER h. EDWOSB THE WOMEN-OWNED SMALL BUSINESS PROGRAM 13. PLACE OF 14. GOVERNMENT B/L NO. 15. DELIVER TO F.O.B. POINT ON OR BEFORE (Date) 16. DISCOUNT TERMS a. INSPECTION b. ACCEPTANCE 22 Jun 2021 17. SCHEDULE (See reverse for Rejections) ITEM NO. SUPPLIES OR SERVICES QUANTITY UNIT UNIT PRICE AMOUNT QUANTITY ACCEPTED (a) (b) ORDERED (d) (e) (f) (g) (c) SEE LINE ITEM DETAIL SEE BILLING 18. SHIPPING POINT 19. GROSS SHIPPING 20. INVOICE NO. 17(h) TOT. INSTRUCTIONS ON WEIGHT (Cont. pages) 21. MAIL INVOICE TO: REVERSE a. NAME AMERICAN EMBASSY ASHGABAT b. STREET ADDRESS (or P.O. Box) $0.00USD 17(i) 7070 ASHGABAT PLACE (GRAND TOTAL) ATTN: FMO c. CITY d. STATE e. ZIP CODE WASHINGTON DC 20521 22. UNITED STATES OF AMERICA BY (Signature) 23. NAME Typed TITLE: CONTRACTING/ORDERING OFFICER AUTHORIZED FOR LOCAL REPRODUCTION DRAFT OPTIONAL FORM 347(REV. 9/2012) PREVIOUS EDITION NOT USABLE Prescribed by GSA/FAR 48 CFR 53.213(f) Page: 2 of 9 DRAFT ORDER FOR SUPPLIES OR SERVICES PAGE NO. SCHEDULE - CONTINUATION IMPORTANT: Mark all packages and papers with contract and/or order numbers. DATE OF ORDER TITLE CONTRACT NO. ORDER NO. Common tools ITEM NO. SUPPLIES OR SERVICES QUANTITY UNIT UNIT PRICE AMOUNT QUANTITY (a) (b) ORDERED (d) (e) (f) ACCEPTED (c) (g) 0001 Ratcheting Combination Wrench Set 12 Point , 1.00 each $0.00USD $0.00USD Alloy Steel, 16-piece metric wrench set with the following sizes of wrenches: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, and 24mm Model: GEARWRENCH 9416 as per link below or equal Link: https://www.amazon.com/dp/B0002NYD1W 0002 Combination Wrench Set 12 Point, 14-piece SAE 1.00 each $0.00USD $0.00USD wrench set with the following sizes of wrenches:"3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-1/4"" Model: Crescent CCWS4 as per link below or equal Link: https://www.amazon.com/Crescent-CCWS4- Combination-Wrench-Pouch/dp/B00EFKYX4K 0003 Wrench Set 75-Degree Deep Offset Double Box 1.00 each $0.00USD $0.00USD End with Heavy Duty Canvas Pouch, 10-piece metric set with 20 sizes: 6 x 7 mm, 8 x 10 mm, 9 x 11 mm, 12 x 14 mm, 13 x 15 mm, 16 x 18 mm, 17 x 19 mm, 20 x 22 mm, 21 x 23 mm, 22 x 24 mm Model: Capri Tools CP11950-10MPK as per link below or equal Link: https://capritools.com/shop/75-offset-double- box-end-wrench-set-metric/ 0004 Wrench Set 75-Degree Deep Offset Double Box 1.00 each $0.00USD $0.00USD End, 7-piece SAE set: 1/4" x 5/16" 3/8" x 7/16" 1/2" x 9/16" 9/16" x 5/8" 11/16" x 3/4" 13/16" x 7/8" 15/16" x 1" Model: Capri Tools CP11950-7MT as per link below or equal Link: https://capritools.com/shop/75-degree-offset- double-box-end-wrench-set-sae-mechanics-tray/ 0005 Digital Vernier Caliper, Range: 0 - 8"and 0 - 2.00 each $0.00USD $0.00USD 200mm; Resolution: 0.0005"/1/128"/0.01mm; Accuracy: 0.001"/0.02mm; 3 Measuring Modes (inch/metric/fraction conversion), Stainless Steel Caliper Measuring Tool, Fraction/Inch/Metric Electronic Caliper with Large LCD Screen Model: Proster PST163-US as per link below or equal Link: https://www.amazon.com/Proster-Calipers- Electronic-Fractions-Measuring/dp/B074BRTM24 0006 Corrugated Rubber Floor Mats Fine Rib , 1/8" Thick 1.00 each $0.00USD $0.00USD x 3' x 20' Runners, Black Model: Rubber-Cal 03_167_W_FR_20 as per link below or equal Link: https://www.amazon.com/Rubber- Cal-03_167_W_FR_10-Corrugated-Rubber- Runners/dp/B004N25RSQ 0007 Tool Pouch Zipper Bag, Includes 4 assorted colors: 7.00 each $0.00USD $0.00USD red, gray, black and brown, 4pc in Set Model: Klein Tools 5141 as per link below or equal Page: 3 of 9 Link: https://www.amazon.com/Utility-Zipper-12-5- Inch-Klein-Tools/dp/B007V8RXVI/ 0008 Snap Ring Pliers with Pick and Hook Set for Ring 3.00 each $0.00USD $0.00USD Remover Retaining, 8Pcs - 4Pcs Heavy Duty Internal/External Circlip Oil Seal Snap Ring Pliers Set & 4Pcs Precision Pick Set and Hook Set Model: Swpeet S446 as per link below or equal Link: https://www.amazon.com/Swpeet-Internal- External-Precision-Retaining/dp/B07SFD8L1S 0009 Bitholding Screwdriver and Pouch Set, 33 Piece. 13.00 each $0.00USD $0.00USD Set contains bitholding Screwdriver, 32 - 3 ½-inch bits, 1 Slotted - 5/16”; 6 Hex-Plus BO (Bore-hole) bits - 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm; 3 Phillips bits - PH1, PH2, PH3; 3 Pozidriv - PZ1, PZ2, PZ3; 3 Spanner bits - 4, 6, 8, 10; 8 TORX BO (Bore-hole) - TX8 BO, TX10 BO, TX15 BO, TX20 BO, TX25 BO, TX27 BO, TX30 BO, TX40 BO; 3 TORQ-SET MPLUS bits - 6mm, 8mm, 10mm; 3 TRI-WING bits - 1, 2, 3, 4 Bitholding Screwdriver and Pouch Set, 33-Pieces Model: Wera - 5059297001 Kraftform Kompakt 62 as per link below or equal Link: https://www.amazon.com/Wera-Kraftform- Bitholding-Screwdriver-33-Pieces/dp/B000NI7RRS 0010 Professional Ice Hardened Hole Saw Kit 28 Piece- 2.00 each $0.00USD $0.00USD Twenty-two (22) hole saws: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/4", 2-1/2", 2-5/8", 3", 3-1/4", 3-3/8", 3-5/8", 3-3/4", 4-1/8", 4-1/4", 4-1/2", 4-3/4"; Three (3) arbors: 49-56-7000, 49-56-7010, 49-56-9100; Three (3) drill bits: 49-56-8010; Model: Milwaukee 49-22-4185 as per link below or equal Link: https://www.amazon.com/Milwaukee-49-22-4185-2 8-Piece-Professional-Hardened/dp/B0017WOBLE 0011 Socket Wrench Set, Socket Size Range 4 mm to 3.00 each $0.00USD $0.00USD 25 mm, 5/32 in to 1 in, Pieces: 86 Model: Westward 53PN73 as per link below or equal Link: https://www.grainger.com/product/WESTWARD-1- 2-53PN73 0012 Tap And Die Set with Drill Bits Machine 1.00 each $0.00USD $0.00USD Screw/SAE/Metric, with plastic case, 117-Piece of the machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, Model: IRWIN 26377 as per link below or equal Link: https://www.amazon.com/Tools-Hanson- Machine-Fractional-26377/dp/B0000DD4KW 0013 Fish Tape, 3/16 In x 100 ft, Fiberglass 1.00 each $0.00USD $0.00USD Model: Greenlee FTF540-100as per link below or equal Link: https://www.amazon.com/Greenlee- FTF540-100-Magnumpro-Fish- Tape/dp/B002M8F6L6 0014 Insulated Torque Control Set 1/4", 20 to 70 in.-lb. 2.00 each $0.00USD $0.00USD 16 Pc. Set,1000V Rated, Model: Wiha Tools 28792 as per link below or Page: 4 of 9 equal Link: https://www.amazon.com/Wiha-28792- Insulated-Torque-Screwdriver/dp/B005M5WCR2/ 0015 High-Tension Hacksaw with special I-beam 8.00 each $0.00USD $0.00USD construction, 12-inch (300mm) 24 TPI hacksaw blade. Model: LENOX HT50 as per link below or equal Link: https://www.amazon.com/Tools-High- Tension-Hacksaw-12- inch-12132HT50/dp/B000LGBZDE 0016 Compact Hand Operated Hack Saw w/ Tool-Less 6.00 each $0.00USD $0.00USD Blade Change (10 Inch Blade Included) Model: Milwaukee 48-22-0012 as per link below or equal Link: https://www.amazon.com/Milwaukee-48-22-0012- Operated-Tool-Less-Included/dp/B003VY8WA2 0017 Black Oxide Metal Index Drill Bit Set, 29 drill bits: 13.00 each $0.00USD $0.00USD 1/16-inch to 1/2-inch bits in 1/64-inch increments, rubber-overmolded Pro Case, 135 DEGREE Model: IRWIN Tools 3018004 as per link below or equal Link: https://www.amazon.com/IRWIN- Tools-3018004-Black-Oxide/dp/B000EB8912 0018 Step Drill Bit Set 6-Piece Metric Set (#1, 4, 6, 7, 8, 13.00 each $0.00USD $0.00USD 9) Model: Milwaukee 48-89-9224 as per link below or equal Link: https://www.amazon.com/Milwaukee-48-89-9224- Step-Bit-6-Piece/dp/B00L081CDU 0019 White on Black Label Tape 12mm 0.47 inch 13.00 each $0.00USD $0.00USD compatible with the Brother P-Touch Label Maker PT-H110, Finish Type Laminated,4Pack in set Model: Greateam GT-L-tze335-4P as per link below or equal Link: https://www.amazon.com/dp/B088LSGRFX 0020 Black on White Label Tape 12mm 0.47 inch 13.00 each $0.00USD $0.00USD compatible with the Brother P-Touch Label Maker PT-H110, Finish Type Laminated, 4Pack in set Model: Greateam GT-L-tze231-4P as per link below or equal Link: https://www.amazon.com/Laminated- Compatible-Brother-P-touch- Makers/dp/B08CDRNWL5 0021 Contact Cleaner, Electrosolve Zero Residue , Non- 3.00 each $0.00USD $0.00USD conductive, Fast evaporation rate, 140g (5 oz) Aerosol Can Model: MG Chemicals - 409B-140G 409B as per link below or equal Link: https://www.amazon.com/MG-Chemicals- Electrosolve-Residue-Electronics/dp/B005DNR0N4 0022 Contact Cleaner and Protectant, 10 oz Aerosol 3.00 each $0.00USD $0.00USD Can, Clear, Non-corrosive and non-staining, Model: CRC 3140 as per link below or equal Link: https://www.amazon.com/CRC-Contact- Cleaner-Protectant-Aerosol/dp/B007I9Y200 Page: 5 of 9 0023 WireNut, Twist On Wire Connector, Gray, (Pack of 4.00 each $0.00USD $0.00USD 100) 16AWG, accepts 2 #22 to 2 #16 AWG wire combinations.