Introduction to Mesoscale Meteorology Overview • Scale Definitions – Synoptic • Synoptic derived from Greek “synoptikos” meaning general view of the whole. Also has grown to imply “at the same time” or “simultaneous”. – Synoptic Scale • The scales of fronts and cyclones studied by the early Norwegian scientists. The classic synoptic scale are the time and space scales resolved by observations taken at major European cities having a mean spacing of about 100 km. Hence weather systems having scales of a few hundred kilometers or more and time scales of a few days are generally what is accepted to be “synoptic scale” phenomena. Overview • Scale Definitions – Cumulus • Defined by the rise of RADAR meteorology in the late 1940’s to be the scale of individual thunderstorm and cumulus cell echoes, this became the second important scale of meteorology research. This scale is on the order of a couple of kilometers to about 50 km and time scales of a few minutes to several hours. Overview • Scale Definitions – Mesoscale (original definition) • Coined by Lidga (1951), mesoscales are the “Middle Scales” between synoptic scale and cumulus scale. This original definition hence referred to weather phenomena of scales between what were thought to be the two primary energy containing scales of cumulus and synoptic scale. The Modern Definition is much more robust. Overview • Scale Definitions – Mesoscale (modern definition) • Orlanski (1975) proposed a new set of scales (ignoring synoptic and cumulus) that include the micro-, meso- and macro- scales. Figure 1 depicts these three definitions. All three definitions have gained wide acceptance, despite an even newer proposal by Fugita (1981). His definition of the “mesoscale” was scales between 2 km and 2000 km. Scales larger than 2000 km are “macroscale” and scales smaller than 2 km are “microscale” Mesoscale Over The Years Overview • Scale Definitions – Mesoscale (modern) • Orlanski divides the “mesoscale” into three “sub- mesoscales”: 1. Meso- : 2-20 km 2. Meso- : 20-200 km 3. Meso- : 200-200 km • We will attach a physical significance to these three mesoscales. Equations of Motion ui ui 1 p u j i, j,k f juk i3g Momentum/Density Form t x j xi ui ui u j i, j,k f juk i3g Momentum/Entropy Form t x j xi ' ' ui ui u j i, j,k f juk i3g Quasi-Boussinesq Momentum/Entropy Form t x j xi o u i ( f )u k g Bernoulli Form i, j,k j j k xi i3 t xi ui n li kx px Lamb Vector Form t i i R p cp cp 1000mb 0if i=j, or j=k, or i=k ijk,, 1if i,j,k are 1,2,3 or 2,3,1 or 3,1,2 1if i,j,k are 3,2,1 or 2,1,3 or 1,3,2 n px i3g i x u i 1 2 j ijk,, A jBAB k ku i iijk,, 2 xk Force Balance in Equation of Motion u Rotational Irrotational hydrostatic imbalance i l k pn i xi xi t Lamb Vector Kinetic Energy Nonhydrostatic Gradient Pressure Gradient |||| Inertial acceleration Real force acceleration ||________________ Inertial Balance Physical Significance of Mesoscale • Two Major Categories of Dynamic Force Balances Result 1. Hydrostatic: Gravity versus Pressure Gradient 2. Inertial: Inertial Force Versus Gravity a) Geostrophic (Horizontal Pressure Gradient versus vertical Coriolis effect) b) Cyclostrophic (Pressure Gradient versus rotational and irrotational inertial) c) Gradient (Horizontal Pressure gradient versus all inertial) Perturbations from Balance • For stable balance, i.e. stability restores balance, perturbations initiate oscillations that result in waves • For unstable balance, perturbations produce a growing disturbance Perturbations from Hydrostatic Balance • Perturbations from stable balance lead to: – Gravity or Buoyancy waves – Horizontal phase speed is NLz g cg kz2o • Perturbations from unstable balance hydrostatic balance (static instability) lead to: – Convection Perturbations from Geostrophic Balance • Stability produces Balance: – Oscillation frequency is f – Wave speed is on order of : f fL c x i k 2 • Unstable balance produces: – Inertial Instability If both hydrostatic and inertial balances occur and the flow is perturbed, what is the result? • Depends on which adjustment dominates. • Determine dominant adjustment from ratio of gravity wave phase speed to inertial wave phase speed: cg Lz N Ro cLfih The Rossby Radius of Deformation • Scale at which there is equal inertial and gravity wave response • The definition of Rossby Radius is: c L NHN L g Z R f ff Rossby Radius for axi-symmetric vortex having tangential wind “V” and Radius “R” cg LR 1 1 2V 2 ff 2 R Scale Based on Physical Mechanism • Small Scales – Frequency of gravity waves, ie Brunt-Visalia Frequency, larger than frequency of inertial waves – Tendency toward hydrostatic balance with “g” dominate • Large Scales – Frequency of inertial wave involving Coriolis larger than gravity wave – Balance against inertial acceleration dominates Back to Mesoscale Definitions • At middle latitudes (40 N) : f 1041s • For a disturbance depth of 7 km: 1 cmsg 20 • Hence Rossby radius is typically: LR 200km Meso • Scales from 2-20 km • Disturbances characterized by Gravity (Buoyancy) Waves (stable) or Deep Convection (unstable). • Coriolis effect generally negligible, although local inertial effects can arise to change character of disturbances (i.e. rotating thunderstorms, tornadoes, dust devils, etc) Roll convection Open and Closed Cells with Lee Eddies Open and Closed Cells Lake Effect Clouds Ship Tracks In stratocumulus off Oregon Sea Fog Valley Fog Trapped Lee Waves in Ireland Mountain Wave Disturbances Orographic Precipitation Supercells Tornado Meso • Scales of 20-200 km • Less than but near to Rossby Radius • Gravity (Buoyancy) Waves govern system evolution and propagate relative to the wind • Inertial oscillation important to wave dynamics, i.e. Gravity-Inertia Waves Shore Parallel Lake Effect Band Actinae Actinae.fli Sea Breeze Convection Seabreeze Meso-beta squall lines Meso- • Scales of 200-2000 km • Scales greater than but near to Rossby Radius of deformation • Characterized by Geostrophic Balance • Geostrophic disturbance determines evolution of the system • Vertical ageostrophic motions driven by geostrophic disturbance, i.e. quasi-geostrophic dynamics Squall Line MCC MCC ITCZ Cluster Tropical Cyclone Exceptions to these rules • These above rules are an approximate description of how the three mesoscales divide typical disturbances. • Changes in latitude mean changes in attitude! As we move to lower latitudes Coriolis effect decreases and the Rossby Radius scale increases, going to infinity at the equator! Hence relative to the Earth’s inertial effect, all disturbances around the equator are dynamically small and are governed by gravity (buoyancy) waves. Hence, the Kelvin wave, a gravity type wave, is a global scale equatorial disturbance. • Deeper disturbances lead to larger gravity wave phase speeds and so have larger Rossby Radius and vise versa for shallow disturbances. Hence, the depth of the disturbance will affect its governing dynamics, the deeper disturbance less likely to be inertially balanced and the shallower disturbances more likely. Some examples: – Sea Breeze without deep convection: shallow, likely to achieve significant geostrophic balance – Sea Breeze with Deep convection: Deep, not likely to achieve inertial balance – Mesoscale Convective Complex: Deep convection parts of the system clearly less than Rossby Radius. Stratiform anvil has large horizontal scale shallow melting layer that may excite inertially balanced disturbance, ie an MCV (mesoscale convective vortex). • Rotation induced in the system may locally shrink the Rossby Radius, making the system dynamically large even on meso-beta scales. For example: – Mesocyclone or rotating thunderstorm with its forward flanking gust front and rear flanking gust fronts actually become quasi balanced and evolve very similar to a developing quasi-geostrophic baroclinic cyclone with warm and cold fronts respectively. This makes the supercell thunderstorm long lived. – The tropical cyclone eye wall becomes inertially stable from the strong storm rotation giving rise to Rossby wave disturbances (relative to cyclone rotation instead of Coriolis) that move around the eye, and play significant roles in horizontal momentum transport through their tilt! – Tornadoes survive relatively long periods for their size because of their inertial balance and locally very small Rossby Radius of Deformation. Genesis of Fefa Special Observation and Analysis Problems of the Mesoscale • Synoptic observation systems have horizontal resolutions of 100 km and 1 hour at the surface and 400 km and 12 hours aloft and are clearly inadequate to capture all but the upper end of the meso- . • The dynamics of mesoscale disturbances contain important non-balanced or transient features that propagate rapidly. • The systems are highly three-dimensional so that the vertical structure is equally important to the horizontal structure. • Mesoscale disturbances are more likely to be a hybrid of several dynamic entities interacting together to maintain the system. • Process Interaction is especially significant. Such processes include microphysical and radiative transfer interactions. • Scale Interactions and particularly interactions across the Rossby Radius of Deformation are basic to the mesoscale problem How Can we Deal with This? • Use observations as clues to the analysis, and do not expect the data to ever be sufficient to reveal the process behind the observations. • Attach a strong dynamical model to the observations to fill in the gaps. To the extent that the model reproduces the observations at points where it is coincident with the observations, it gains credibility. • Study the model to understand the dynamics. If the model is consistent with the few observations, then the model can be used (always with caution) to reveal the dynamics of the system. What is a Model? • Models range from simple to complex. • Simple model: Quasi-Geostrophic model: positive vorticity advection results in upward vertical motion. Its so simple we can do it in our heads! But it has many approximations and is likely to miss features that can be represented in more complex models.