R SYSTMS Mira Connect Integration Sony Bravia (Consumer) Displays The Sony Bravia family of consumer displays can be controlled with Mira Connect™, Aveo Systems’ smart control appliance. Mira Connect communicates and controls the Sony Bravia using infrared with a Global Caché IP2IR (IP to infrared) interface. Follow these steps to integrate a Sony Bravia consumer display with Mira Connect: Step Add a Sony Bravia (Consumer IR) to the room in Mira Portal (https:// Add Equipment mira.aveosystems.com), enter the IP address of the Global Caché IP2IR Samsung Professional 1 Sceptre Display (IR) interface, select which IR connector (1, 2, or 3) is used on the IP2IR interface Sharp Professional/Aquos for sending IR signals to the display, and press ‘add equipment’. Mira SMART Board Connect will connect to the Sony Bravia system and show the status of the Sony Bravia (Consumer IR) Sony Bravia (Pro Ethernet) connection. TCL Display (IR) ViewSonic ViewBoard Mira Portal will show the equipment status as a green circle, , if the IP Vivitek NovoTouch address is valid, otherwise the warning symbol, ! , will appear indicating the IP address is not correct or Mira Connect does not have a network route to the IP2IR device. Step Specify which video inputs are used on the display by selecting Edit from the 2 device’s menu, selecting the Video Inputs tab and enabling an input, selecting an icon, and entering text labels for the desired inputs. This will 1 2 3 create a display menu as shown in the following figures. Global Caché IP2IR interface. The display menu will be built and previewed on the Video Inputs tab within Mira Portal. Entering a display name is useful if you have multiple displays in the room. Equipment ADD Note, when using IR display drivers, there are discrete power on and power off buttons instead of an on/off switch. Sony Bravia (Consumer IR) 192.168.13.169 Add Equipment Didn’t find your equipment? Request it! Equipment Type * Model * Sony Bravia (Consumer IR) Universal Simulate equipment CONNECTION VIDEO INPUTS INPUT HD Menu Preview COMPONENT This menu will appear on Mira Connect. If you have Display Icon Label more than one display, enter a name for each. Drag Power items to change order. The first item is the default LAPTOP INPUT HDMI 1 selected input. Description (Optional) Select source: Local Presentation Display Name (Optional) Power Off Power On LAPTOP INPUT HDMI 1 Select source: Local Presentation ALTERNATE LAPTOP Icon Label Local Presentation INPUT HDMI 2 ROOM COMPUTER ROOM COMPUTER Description (Optional) Soft Codec Power on/off control for an IR-controlled display. Soft Codec Questions about Sony Bravia (Consumer IR)? i CANC A IPMNT See the integration guide. R Aveo Systems, Inc. • 1791 West Oak Parkway • Suite 8 • Marietta, GA 30062• Phone: +1.678.653.7090 Fax: +1.844.fax.aveo • Email: [email protected] • www.aveosystems.com SYSTMS Mira Connect Integration with the Sony Bravia Consumer Displays See the Mira Connect Administrators Guide for more information about using Mira Portal to set up Mira Connect. Important information about the integration is summarized below. Control Interface Network connection with TCP, port 4998, using the Global Caché IP2IR interface for IR control. Set a static IP address, or use a ‘reserved’ lease on a DHCP server to ensure the IP address does not change over time. Volume Control There is no support for volume control of the display. Use a DSP audio conference device or video conferencing system for volume control. Supported Models Mira Connect supports all Sony Bravia Consumer IR displays that support Infrared control. Software Versions Tested with Sony Bravia Consumer display. Troubleshooting • If the display does not connect, ensure the IP address is correct for the IP2IR interface. • If the equipment does connect, but does not control the display, ensure the IR emitter is plugged into the connector (1, 2, or 3) of the IP2IR that matches what was entered when you added the display in Mira Portal. The emitters that ship with the IP2IR will flash red when transmitting. If you don’t see the emitter flash when sending commands, it likely is plugged into the wrong connector on the IP2IR. • Ensure the IR emitter is mounted securely over the IR receiver on the display. For more information please contact our Sales Department at [email protected]. R About Aveo Systems Aveo Systems is a leading provider of intuitive and easy-to-use solutions for audio, video, and SYSTMS collaboration, improving how systems are used and managed by customers worldwide. Specifications subject to change without notice. Aveo Systems and the Aveo logo are registered trademarks. DS-11065-001 Version 20201218 All other trademarks are the property of their respective owners..