TTC References Grid Design / Grates Drainage / Façade / Canteen Kitchens Gravity Cooling GraviVent Chilled Beams Floor Heating/Cooling Units protection vertical/horizontal Sun Ceiling Panels Lighting Design Parapet Components Catwalks BMW Zurich, Garage Adliswil Showroom, Adliswil, Switzerland Engineers: HL-Technik, Munich 200 metres type FHKI induction floor units for heating and cooling using a 4 pipe system, special design with type KST linear gratings, narrow fin spacing, can be driven over with a car LFA Landesförderanstalt Bayern, Munich Architects: Auer+Weber+Assoziierte GmbH, Munich Engineers: RS Ingenieure GmbH, Munich 160 metres floor units for convective heating with type KSF filigree comb gratings made of aluminium and stainless steel, 10mm bar spacing Sky Office, Düsseldorf Architects: ingenhoven architects, Düsseldorf Engineers: DS-Plan, Cologne 170 metres type FHOI2 floor units for heating and ventilating in a special design, arranged as a continuous ribbon along the curved facade, with a type KSF filigree aluminium comb grating cover, polygonal corner design Museum Villa Vauban, Luxemburg Engineers: Goblet Lavandier & Associés S.A., Luxemburg 160 metres type FOOQ TTC floor units for dispersed air ventilation with a rigid, transverse type KSV wooden grating cover, made of stained oak Folkwang Museum, Essen Architects: David Chipperfield Architects Ltd., London, UK Landschaftsarchitekt: Planungsbüro Hasse, Mülheim an der Ruhr 250 metres facade drainage channels with stainless steel design gratings 10 mm bar spacing; 100 metres façade drainage channels and homogeneous aluminium gratings; 80 metres stainless steel slotted channels and inspection openings, all joints laid in the grid pattern of the stone covering KfW Westarkaden, Frankfurt Architects: Sauerbruch Hutton, Berlin Engineers: ZWP, Cologne 800 TTC convector heater units and 80m type FOKI floor units for cooling in a special design RBB Berlin Architects: Biek Berlin Engineers: Ridder und Meyn Ingenieurgesellschaft mbH, Berlin 21 TTC GraviVent units type Modultherm AISI with type LSS air inlet gratings arranged as a continuous ribbon TTC References Grid Design / Grates Drainage / Façade / Canteen Kitchens Gravity Cooling GraviVent Chilled Beams Floor Heating/Cooling Units protection vertical/horizontal Sun Ceiling Panels Lighting Design Parapet Components Catwalks Bavaria Tower, Hamburg Architects: KSP Jürgen Engel Architekten GmbH, Braunschweig Landscape planner: H.O. Dieter Schoppe + Partner, Hamburg 130 metres facade drainage channels, black coated, with linear aluminium gratings, 10 mm bar distance; 30 ventilation gratings for the underground car park, bench mounted, homo- geneous design to match the facade drainage channel gratings Oeconomicum, Heinrich Heine University, Düsseldorf Architects: ingenhoven architects, Düsseldorf Engineers: DS-Plan, Stuttgart 92 metres TTC floor units with a special design support structure, arranged as a continuous ribbon along the curved facade with type KSF aluminium comb grating covers, 10 mm bar spacing; 860 m² paneling in the building services centre using hot-dip galvanized linear gratings and a black insulating and sealing foil behind them Cologne University, Seminar building, Cologne Architects: Gottfried Böhm, Cologne Engineers: ZWP Ingenieur-AG, Cologne 280 metres type FHOK2 floor units for heating with filigree type LST alumini- um linear gratings, natural anodised, arranged as a continuous linear ribbon E.ON, Essen Architects: sop/JSK Architekten, Düsseldorf Landscape planner: Planungsbüro Hasse, Mülheim an der Ruhr 770 metres drainage channels with filigree aluminium linear gratings, 10 mm bar spacing, natural anodised finish, straight and curved design, in the en- trance area safe to walk on with stiletto heels und safe to drive over with lift trucks SWR, Stuttgart Architects: struhk architekten Planungsgesellschaft mbH, Braunschweig Engineers: Thurm&Dinges Planungsgesellschaft mbH, Stuttgart ADO GraviVent type AISI/AVSI and 66 TTC ceiling induction units type DOKI in a special design for installation on a lighting frame in studios with a very high cooling power, compliant with limiting curve GK15 Harpa Concert & Conference Centre Reykjavik, Iceland Architects: Henning Larsen Architects, Copenhagen, Denmark Engineers: Rambøll, Virum, Denmark 70 metres type AISI TTC gravity cooling with type LSF aluminium air inlet and air outlet gratings, arranged as a continuous ribbon HFF Universitiy of Television and Film, Munich Architects: Gottfried Böhm, Cologne Engineers: Kühn Bauer Partner Beratende Ingenieure GmbH, Munich 300 metres chilled beams in a special design for installation on a lighting frame in all studios TTC References Grid Design / Grates Drainage / Façade / Canteen Kitchens Gravity Cooling GraviVent Chilled Beams Floor Heating/Cooling Units protection vertical/horizontal Sun Ceiling Panels Lighting Design Parapet Components Catwalks University of Leipzig Architects: Wiel Arets, Maastricht + Amsterdam, Netherlands Engineers: Brendel Ingenieure AG, Berlin; MLT Ingenieure GmbH, Leipzig 280 metres TTC Modultherm GraviVent type AISI in a special design 650 metres type KSF air outlet gratings arranged as a continuous ribbon in the wall, 5 mm bar spacing Hyatt Regency Düsseldorf, Hafenspitze, Düsseldorf, Germany Architects: sop slapa oberholz pszczulny architekten, Düsseldorf, Germany Landscape planner: WKM Landschaftsarchitekten, Meerbusch, Germany 57 metres LED wall washer in the interior Golden Box area, 3 watts directional LEDs in an aluminium casing, dimmable, warmwhite, and imperceptible, built- in inspection openings; 763 metres drainage channels, black coated with linear design gratings made of aluminium, straight and curved design; 35 metres stainless steel slotted channel Ravensburg Health Centre, Germany Architects: Arcass Freie Architekten, Stuttgart, Germany Filigree sun and glare protection as a folding element in front of the facade, made of aluminium 35.4, 50mm fin spacing, powder coated finish to archi- tects’ specification, 49 units 3140 x 440, 25 units 3655 x 400 Ericusspitze HQ of the Spiegel Group, Hamburg, Germany Architects: Henning Larsen Architects, Copenhagen, Denmark TGA-Engineers: Drees & Sommer, Cologne, Germany Elektro-Engineers: ISR Schlegel & Reußwig GmbH, Lage/Bielefeld, Germany 37 TTC gravity cooling units type AAVS GraviVent; 85 metres LED Lightline wall washers and emergency footpath lighting in the outdoor area, 1 watt Power LEDs, spaced at 200 mm intervals, warmwhite, filigree aluminium casing, natural anodised Düsseldorf Underground, Elevator Exit to Klever Straße, Düsseldorf Architects: AP & B Architekten, Düsseldorf, Germany 11.5 metres stainless steel drainage channels with filigree, stainless steel linear gratings, narrow bar spacing, polished; 2 LED uplights in the lift entrance area, 3m LED Drainlight wallwasher, warmwhite Studios Hangar de Rouen, Rouen, France 37 units TTC GraviVent Modultherm type AISI; 70 metres type KSF aluminium air outlet gratings, natural anodised CMA-CGN Tower, Marseille, France Architects: Zaha Hadid Architects, London, UK Engineers: Arup, London, UK 11.5 metres Conlight dispersed air ventilation ducts made of black steel with type LSF aluminium linear gratings; 11.5 metres LED accent lighting with satined glass cover, warmwhite; 110 metres type FHOK2 floor units arranged as a continuous ribbon along a curved facade, with type LSF aluminium linear gratings, natural anodised, black joints with oval column cut-outs TTC References Grid Design / Grates Drainage / Façade / Canteen Kitchens Gravity Cooling GraviVent Chilled Beams Floor Heating/Cooling Units protection vertical/horizontal Sun Ceiling Panels Lighting Design Parapet Components Catwalks Cologne Tower Media Park, Tenant improvement on 19th + 23th, Cologne Architects: Kohl:Fromme Architekten, Duisburg, Germany Engineers: CPE GmbH, Reiskirchen, Germany 27 units ADO GraviVent Modultherm type AASS; 15 metres high quality stain- less steel gratings, 10mm bar spacing, visible areas polished, air inlet; 1 meeting room fully fitted out with GraviVent Altstadt-Palais, Munich, Germany Architect: Auer + Weber, Munich, Germany HVAC engineers: Zibell Willner & Partner, Munich, Germany 434 pieces ceiling-chilled beam with primary air-plug, 1.100 mm, Type ACBLE Astra Tower and Bavaria Office Architect: KSP Engel & Zimmermann, Braunschweig, Germany Landscape Designer: Schoppe + Partner, Hamburg, Germany Homogeneous grid design; 110 metres of façade drainage with linear comb gratings made of aluminium, surface E6C 31; 30 metres of comb gratings made of aluminium E6C 31 on the underground parking’s exhausts German Redevelopment Company, Cologne, Germany Architect: JSK, Düsseldorf, Germany HVAC engineers: Relles, Euskirchen, Germany 1.450 metres of filigree comb gratings made of aluminium, 10 mm bar dis- tance, surface natural anodized; 143 metres of façade drainage with comb gratings made of aluminium, 10 mm bar distance, in the foyer 5 mm bar distance EIB European Investment Bank, Luxemburg Architekt: Ingenhoven & Partner, Düsseldorf, Germany Façade designer: Werner Sobek, Stuttgart, Germany Filigree fin grids for the glass roofs; 1.180 square metres of aluminium fin grids, profile 160/10, in different trapeze sizes; Construction and statics con- strued with focus in corner carriers; Surface natural anodized FIZ Innovation Centre Biotechnology, Frankfurt/Main, Germany Architect: Henn Architekten, Munich 73 metres of filigree, linear comb gratings made of aluminium, vertical setted and bend