Recommended Tools for Melco Tech's Melco recommends the following tools be included in our field service technicians' tool kits. • 5 inch HD cutter • Long nose 5 inch pliers • Combo pliers - 6 inch • 6 inch curved hemostat • Flush cutter - 4 inch • Knipex external snap ring tool • Tweezers - 6 inch, angled • Nut driver - 3/16 • Nut driver - 7/32 • Nut driver - 1/4 • Nut driver - 9/32 • Nut driver - 5/16 • Nut driver - 11/32 • Nut driver - 3/8 • Nut driver - 7/16 • Nut driver - 1/2 • Nut driver - 5.5mm • Nut driver - 7 mm • Nut driver - 10 mm • Hex blade, ball end - 0.050 99-20 • Hex blade, ball end - 1/16 99-21 • Hex blade, ball end - 5/64 99-22 • Hex blade, ball end - 3/32 99-23 • Hex blade, ball end - 7/64 99-764 • Hex blade, ball end - 1/8 99-24 • Hex blade, ball end - 9/64 99-964 • Hex blade, ball end - 5/32 99-25 • Hex blade, ball end - 3/16 99-26 • Hex blade, ball end - 1.5 99-72mm • Hex blade, ball end - 2.0 99-73mm • Hex blade, ball end - 2.5 99-74mm • Hex blade, ball end - 3.0 99-75mm • Hex blade, ball end - 4.0 99-76mm • Hex blade, ball end - 5.0 99-77mm • Regular handle • Extension blade • Solder pack • Soldering iron • 1/32 solder tip • Solder wick • Electricians' scissors • Phillips #0 x 2 inch long blade • Phillips #1 x 3 inch long blade • Phillips #2 x 4 inch long blade • Slotted screw driver - 3/16 x 3 inch blade • 4 in 1 stubby screw driver • Slotted/Phillips mini screw driver set • Slotted screw driver - 3/32 x 2 inch long blade • Slotted screw driver - 5/16 x 6 inch long blade • Screw holder - 6 inch long • 7 piece hex metric set (Chapman set) • Ignition wrench set (standard) • Ignition wrench set (metric) • Adjustable wrench - 4 inch long • Adjustable wrench - 8 inch long • Ball end hex key set (standard) • Ball end hex key set (metric) • Dial calipers - 6 inch • Steel rule - 6 inch • Feeler gauge inch set • Alignment tool • Fiberglass screw driver • Mini-mag flashlight - AA batteries • Extra AA batteries • Lighted magnifying lens - 10x • Telescoping mirror • Automatic center punch • Light weight exacto knife • 4 ounce ball peen hammer • Super champ crimper • Mini blaze torch • Adjustable wrist strap • Low cost PLCC chip extractor • SPC CMP-21 Chapman #2 • SPC CMP-26 Chapman #1 For your convenience, all of the tool listed here, plus several others, are offered by Tecra Tools pre-packaged in a sturdy carrying case under the product name "Melco 100." Contact them at (800) 284-0808 for more information. Visit their Web site at http://www.tecratools.com. .