PRODUCT MANUAL ENGLISH ComPLC MANUAL VERSION 3.1/0318 This manual refers to software version 3.2 ComPLC COMMEND INTERNATIONAL GMBH Saalachstraße 51 A-5020 Salzburg – Austria www.commend.com Product manual ComPLC Edition March 2018 Version 3.1/0318 Legal notice: The manufacturer guarantees the functionality of its products as described in the data sheets and/or tech- nical documentation. For error-free operation of the Intercom system, faultless transmission paths are mandatory. The functionality of transmission paths, in particular of IP networks, exclusively is the respon- sibility of the operating company of the transmission path and therefore the manufacturer cannot be re- sponsible in any manner, for errors and problems, which result from problems or malfunctioning of the transmission path. It is not allowed to copy any text of this document without permission of COMMEND INTERNATIONAL GMBH. The technical data contained herein has been provided solely for informational purposes and is not legally binding. Subject to change, technical or otherwise. IoIP®, OpenDuplex® and Commend® are trademarks registered by Commend International GmbH. All other brands or product names are trademarks or regis- tered trademarks of the respective owner and have not been specifically earmarked. Number of pages: 91 2 3.1/0318 ComPLC Content General information 4 Upload configuration 14 PDF format 4 Download configuration 14 Info boxes 4 Toolbar 15 Legend of requirements 4 Section: Settings 16 Introduction 5 Section: Interfaces 18 System requirements 6 Section: Online 22 Licence requirements 6 Scheme explorer 25 Variables 32 Runtime variables 33 Setup guide 8 Licence bar 37 Licensing 9 Error message box 38 Component search dialogue 38 Installation 10 Components 39 Installation of the program ComPLC 10 Updating the program ComPLC 10 Appendix 89 Initial setup 10 Example: SNMP Traps 89 The program ComPLC 13 Technical Support 91 Program interface 13 3.1/0318 3 General information ComPLC 1. General information 1.1 PDF format The PDF manual can be used with the following viewers: Adobe Reader from version 6.0 Foxit Reader from version 5.0 1.2 Info boxes ATTENTION This information box addresses all necessary configuration options and actions, which will allow error-free operation. In addition, this box warns you if a certain configuration, option or entered value could lead to a malfunction of the application or a loss of data. NOTE This information box serves multiple purposes: The information included ranges from basic configuration tips to additional advice and comments on occasional settings and events. GOOD TO KNOW This information box provides background knowledge, which helps to understand the basic principles behind different configurations and the application itself. 1.3 Legend of requirements Next to the individual features, the required software version is displayed as follows: Symbol Requirement 3.2 Required ComPLC version 4 3.1/0318 ComPLC General information 1.4 Introduction ComPLC is an application to design and execute logical timed sequences and operations in a descriptive user interface. ComPLC supports the most important Intercom elements as well as KNX or Modbus interfaces. These options make it possible to interlink the world of Intercom with building automation of KNX and the most common PLC systems of Modbus in a very flexible manner. The solution you create with ComPLC runs either on a G8-VOIPSERV card via an Intercom Server GE 800/GE 300 or a virtual application card of VirtuoSIS. Modbus system KNX system IP network Intercom system ComPLC workstation ComPLC overview NOTE: Further information For more information about G8-VOIPSERV, see manual “VOIPSERV Applications”. For more information about VirtuoSIS, see manual “VirtuoSIS Setup Guide”. One of the key benefits is the implemented online mode. A simple button click lets you take a detailed real-time look at the current state and workings of your designed logic. For recurring sequences (same logic but different inputs and outputs) ComPLC allows you to execute your designed logic with different circumstances. The highly flexible structure of the designer’s user interface provides an excellent overview even over large projects. Once the sequences are designed, the generated logic can automatically be uploaded onto a G8-VOIPSERV or a virtual application card of VirtuoSIS. 1.4.1 Key facts Windows-based graphical design application. Stand-alone execution of the designed sequences on G8-VOIPSERV and VirtuoSIS. The G8-VOIPSERV card or virtual application card of VirtuoSIS is configured automatically by ComPLC designer. Use of ICX messages. Support of webhook commands via HTTP. Configuration of individual functional components. Ready for KNX interface to connect up to 50 KNX Net/IP gateway devices. Ready for Modbus interface to connect up to 50 slave devices. Integrated online mode for tracing operations in real-time. 3.1/0318 5 General information ComPLC 1.5 System requirements 1.5.1 Required hardware and software Intercom software and hardware Requirements for ComPLC 2.x Requirements for ComPLC 3.x VirtuoSIS: min. PRO 800 5.0 VirtuoSIS: min. PRO 800 6.0 GE 800/GE 300: min. PRO 800 4.1 GE 800/GE 300: min. PRO 800 6.0 G8-VOIPSERV: min. 1.2 G8-VOIPSERV: min. 1.2 Configuration software min. CCT 800 5.0 min. CCT 800 6.0 Operating system Microsoft® Windows 10 Microsoft® Windows 10 Microsoft® Windows 8 Microsoft® Windows 8 Microsoft® Windows 7 Microsoft® Windows 7 Windows®Server 2012 Windows®Server 2012 Windows®Server 2008 R2 Windows®Server 2008 R2 .NET Framework min. 4.6.1 min. 4.6.1 Supported languages English Englisch German German 1.6 Licence requirements The following ComPLC licences are available: 1.6.1 Licences for ComPLC version 2.x ATTENTION: Licences only for ComPLC 2.x The following licences are only supported by ComPLC 2.x! Licences Description Licence for up to 50 licence-based input/output compo- L-PLC-S nents (stacking of several licences is possible) Licence for up to 10,000 licence-based input/output com- L-PLC-P ponents One server base licence is required per VirtuoSIS when L-SIS-PRO5U ComPLC is carried out via a virtual application card. 6 3.1/0318 ComPLC General information 1.6.2 Licences for ComPLC version 3.x ATTENTION: Licences only for ComPLC 3.x The following licences are only supported by ComPLC 3.x! Licences Description Licence for up to 50 licence-based input/output compo- L-PLC-50 nents (stacking of several licences is possible). Licence for up to 200 licence-based input/output compo- L-PLC-200 nents (stacking of several licences is possible). Licence for use of configuration of one KNX connection in L-PLC-KNX ComPLC (stacking of up to 50 licences is possible). Licence for use of configuration of one MODBUS connec- L-PLC-MODBUS tion in ComPLC (stacking of up to 50 licences is possible). Licence for use of configuration of one SNMP function in L-PLC-SNMP ComPLC (only one licence per ComPLC necessary). Licence for use of the e-mail function in ComPLC (only one L-PLC-MAIL licence per ComPLC necessary). Licence for use of webhooks in ComPLC (only one licence L-PLC-WEBCOM per ComPLC necessary). One server base licence is required per VirtuoSIS when L-SIS-PRO5U ComPLC is carried out via a virtual application card. Licence for use of configuration of one SDS connection in Y-L-CS-C ComPLC (stacking of up to 50 licences is possible). 3.1/0318 7 Setup guide ComPLC 2. Setup guide ComPLC can be operated either via G8-VOIPSERV or VirtuoSIS. There are several configuration steps, which have to be carried out beforehand. On the following pages, you will find a detailed step-by-step setup guide to initialize and to configure ComPLC. See the following illustration for a basic overview of the required configuration of ComPLC via G8- VOIPSERV or VirtuoSIS: ComPLC VirtuoSIS G8-VOIPSERV Licensing Licensing Licensing via VirtuoSIS Licensing via G8-VOIPSERV Installation Installation Updating the program ComPLC Updating the program ComPLC Installation of the program ComPLC Installation of the program ComPLC Initial setup Initial setup ComPLC – ICX connection ComPLC – ICX connection Establish connection to VirtuoSIS Establish connection to VirtuoSIS or G8-VOIPSERV or G8-VOIPSERV ComPLC allocation for VirtuoSIS Create a new project Setup guide for ComPLC 8 3.1/0318 ComPLC Setup guide 2.1 Licensing The operation of certain components requires specific licences (see page 6). Listed below, you will find the information on how and where to assign them in CCT 800. Further information about licence-based components can be found on page 36. ATTENTION: Licence allocation for ComPLC 2.x One “L-PLC-P” licence and up to three “L-PLC-S” licences can be allocated to one client! NOTE: Further information For more information about licensing, see manual “Intercom Server Configuration”. 2.1.1 Licensing via VirtuoSIS The ComPLC licences have to be allocated to any available client of the “SIS-CSA” virtual application card of VirtuoSIS. Licence process for VirtuoSIS Drag and drop the licence on the desired client of the virtual application card “SIS-CSA”. Click on the button Synchronize to accept the changes. A restart of VirtuoSIS is required. 2.1.2 Licensing via G8-VOIPSERV The ComPLC licences have to be allocated to the client “2” of the G8-VOIPSERV card of the Intercom Server GE 800/GE 300. Licence process for G8-VOIPSERV Drag and drop the licence on the desired G8-VOIPSERV card. Double-click on the box in the column “Address” 1 and change the client number to “2”. Click on the button Synchronize to accept the changes. A restart of the Intercom Server GE 800/GE 300 is required. 3.1/0318 9 Installation ComPLC 3.