ECE3300 -- LECTURE 6 Transmission Line Equations

ECE3300 -- LECTURE 6 Transmission Line Equations

ECE3300 -- LECTURE 6 Transmission Line Equations (Telegraphers Equations): Lumped element model represents voltage and current on transmission line. Voltage and current?? What about fields??? Fortunately, they are dual (proportional). Kirchoff Loop Equation: V(z,t) – R I(z,t) – L di(z,t)/dt – v(z+ ∆z,t) = 0 R = R’ ∆z, L = L’ ∆z Divide by ∆z, combine V terms, and rearrange: V(z,t) / ∆z – R’ I(z,t) – L’ dI(z,t) /dt – V(z+ ∆z,t) / ∆z = 0 -[ V(z+ ∆z,t) - V(z,t) ] / ∆z = R’ I(z,t) + L’ dI(z,t)/dt Limit as ∆z 0 (difference goes to differential): -dV(z,t)/dz = R’ I(z,t) + L’ dI(z,t)/dt Kirchoff Node Equation: I(z,t) – G v(z+ ∆z,t) – C dv(z+ ∆z,t)/dt – I(z+ ∆z,t) = 0 I(z,t) – G’ ∆z v(z+ ∆z,t) – C’ ∆z dv(z+ ∆z,t)/dt – I(z+ ∆z,t) = 0 Divide by ∆z and rearrange : -[ I(z+ ∆z,t) - I(z,t)] / ∆z = G’ v(z+ ∆z,t) + C’ dv(z+ ∆z,t)/dt Limit as ∆z 0 : -dI(z,t) / dz = G’ v(z+ ∆∆∆z,t) + C’ dv(z+ ∆∆∆z,t)/dt Telegraphers equations: -dV(z,t)/dz = R’ I(z,t) – L’ dI(z,t)/dt -dI(z,t) / dt = G’ v(z+ ∆z,t) + C’ dv(z+ ∆z,t)/dt Sinusoidal Steady-State Form: Convert to Phasor form. -dV(z)/dz = (R’ + j ωL’) Ι(z) -dI(z)/dz = (G’ + j ωC’) V(z) What is difference between this and “regular” circuit equations?? They are a function of z…. distance down the transmission line. Wave Equation form: Take d/dz of one equation, and substitute it into the other equation. (Doesn’t matter which one) -d2 I(z)/dz 2 = (G’ + j ωC’) d V(z)/dz dV(z)/dz = -d2 I(z)/dz 2 / (G’ + j ωC’) -dV(z)/dz = (R’ + j ωL’) Ι(z) -d2 I(z)/dz 2 / (G’ + j ωC’) = (R’ + j ωL’) Ι(z) -d2 I(z)/dz 2 – ((R’ + j ωL’) (G’ + j ωC’)) Ι(z) = 0 -d2 I(z)/dz 2 –γγγ2ΙΙΙ(z) = 0 alternate form (derived in text) -d2 V(z)/dz 2 –γγγ2V( z) = 0 Complex Propagation Constant: γ = sqrt((R’ + j ωL’) (G’ + j ωC’)) = α + j β attenuation constant: α = Re[(R’ + j ωL’) (G’ + j ωC’)] (Neper/meter) Passive Lines (all shown here) = zero or positive … exp (-αz) attenuation occurs Active Lines (active region of laser) = negative … gain occurs Phase constant β = Im[(R’ + j ωL’) (G’ + j ωC’)] (radians/meter) phase shift term Forward and Backward Waves Solutions of the basic wave equations have solutions of the form: V(z) = Vo + e-γz + Vo - eγz volts I(z) = Io + e-γz + Io - eγz amps Later, we will see: e-γz represents forward(+) traveling wave eγz represents backward(-) traveling wave Characteristic Impedance d/dz [ V(z)] = d/dz[ Vo + e-γz + Vo - eγz volts ] = γ [Vo + e-γz + Vo - eγz volts] Plug into wave equation: γ [-Vo + e-γz + Vo - eγz volts] = (R' + j ωL') I(z) I(z) = γ [Vo + e-γz - Vo - eγz volts] / (R' + j ωL') = [ γ / (R' + j ωL')] [Vo + e-γz - Vo - eγz volts] Zo =Vo + / Io + = Vo - / Io - = (R' + j ωL') / γ = sqrt( (R' + j ωL') / (G'+j ωC') ) Characteristic impedance is the ratio of V/I for forward and backward waves, SEPARATELY. It is not the ration of V/I for the total wave. Vo + = | Vo + | e jφ+ Vo - = | Vo - | e jφ- v(z,t) = Real( V(z) e jωt ) = Real[(Vo + e-γz + Vo - eγz ) e jωt ] = Real [| Vo + | e jφ+ ejωt e-(α + jβ)z + | Vo - | e jφ- ejωt e(α + jβ)z ] =| Vo + |e-αz cos( ωt - βz + φ+) + | Vo -|e αz cos( ωt + βz + φ-) First term: Traveling wave in +z direction (coefficients of t and z have opposite signs) Second term: Traveling wave in -z direction (coefficients have same signs) Propagation Velocity: vp = ω / β = f λ Standing Wave (next section) : Combination of +z and -z traveling waves Example: (exercise 2.4) A 2-wire air line has R'=.404 mohm/m, L'=2. µH/m , G'=0, C'=5.56 pF For operation at 5 kHz, determine (a) Attenuation constant α = Re[ sqrt( (R’ + j ωL’) (G’ + j ωC’))] = 3.37 x 10 -7 Np/m ω = 2 πf = 2 π 5 x 10 3 (b) Phase constant β = Im[sqrt((R’ + j ωL’) (G’ + j ωC’))] = 1.05 x 10 -4 rad/m (c) Phase velocity 8 vp = ω / β = 2.99 x 10 m/s (d) Characteristic impedance Zo = sqrt( (R' + j ωL') / (G'+j ωC') ) = 600 - j2 ohms = 600 ∠-.19 ° ohms How would you increase Zo using the same materials? R' is function of resistance of conductors. Using same materials, you would need MORE metal to increase this. Make wires thicker. L' is function of inductance between conductors. Bring them closer together to increase L'. C' similar, but want to decrease it to increase Zo…. TRADEOFFS! .

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    4 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us