Digital Home Cinema System LXLX700700 Important Note Important notes for users in the U.K. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro- logic” and the double-D symbol are trademarks of Dolby Laboratories. Mains plug Confidential Unpublished Works. © 1992-1999 Dolby Laboratories, This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Inc. All rights reser’ved. 1. Remove fuse cover and fuse. MANUFACTURED UNDER LICENSE FROM DIGITAL THEATER SYS- 2. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or TEMS, INC. US PAT. NO 5,451,942, 5,956,674, 5,974,380, 5,978,762 BSI approved type. 3. Refit the fuse cover. AND OTHER WORLDWIDE PATENTS ISSUED AND PENDING. “DTS” AND “DTS DIGITAL SURROUND” ARE RESISTERED TRADEMARKS If the fitted plug is not suitable for your socket outlets, it OF DIGITAL THEATER SYSTEMS, INC. COPYRIGHT 1996, 2000 DIGI- should be cut off and an appropriate plug fitted in its place. TAL THEATER SYSTEMS, INC. ALL RIGHTS RESERVED. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distri- bution board should not be greater than 5 Amp. CAUTION Note: The severed plug must be disposed off to avoid a possible RISK OF ELECTRIC SHOCK shock hazaed should it be inserted into a 13 amp socket else- DO NOT OPEN where. AVIS : RISQUE DE CHOC ELECTRIQUE' PAS OUVRIR. How to connect a plug This symbol is intended to alert the user of the The wires in the mains lead are coloured with the following code: presence of uninsulated “dangerous voltage” blue = neutral (N) within the product’s encasement that may be of Brown = live (L) sufficient magnitude to constitute a risk of electric shock to persons. As these colours may not correspond with the colour mark- ings identifying the terminals in your plug, proceed as fol- lows: This symbol is intended to alert the user of the - Connect the blue wire to the terminal marked n or coloured presence of important operating and black. maintenance (servicing) instructions in the - Connect the brown wire to the terminal marked N or coloured red. literature accompanying the appliance. - Do not connect either wire to the earth terminal in the plug, marked E (or ) or coloured green (or green and yellow). Italia DICHIARAZIONE DI CONFORMITA’ Before replacing the plug cover, make certain that the cord Si dichiara che l’apparecchio LX-700D Philips risponde grip is clamped over the sheath of the lead - not simply over alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto the two wires. 1995 n. 548. Fatto a Eindhoven Copyright in the U.K. Philips Consumer Electronics Recording and playback of material may require consent. Philips, Glaslaan 2 See Copyright Act 1956 and the Performer’s Protection Act 5616 JB Eindhoven, The Netherlands 1958 to 1972. Norge CAUTION Typeskilt finnes på apparatens underside. Observer: Nettbryteren er sekundert innkoplet. Use of controls or adjustments or performance of proce- Den innebygde netdelen er derfor ikke frakoplet dures other than herein may result in hazardous radiation nettet så lenge apparatet er tilsluttet exposure or other unsafe operation. nettkontakten. For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet. 2 IMPORTANT NOTE Index English -------------------------------------------------------- 4 English Français ------------------------------------------------------17 rançais F Español ------------------------------------------------------30 Español Deutsch ----------------------------------------------------- 43 Deutsch Nederlands -------------------------------------------------56 Nederlands Italiano -------------------------------------------------------69 Italianlo Svenska ------------------------------------------------------82 Svenska Dansk -------------------------------------------------------- 95 Dansk Suomi ------------------------------------------------------ 108 Suomi tuguês Português ------------------------------------------------- 121 r Po -------------------------------------------------- 134 Polski------------------------------------------------------- 147 olski P êÛÒÒÍËÈ ------------------------------------------------------------- 160 êÛÒÒÍËÈ INDEX 3 English Contents Introduction and General Other Functions Information System Setup .................................................................... 13 Center delay Features ............................................................................... 5 Rear delay Supplied accessories ......................................................... 5 Test tone Environmental information.............................................. 5 Digital input Installation ........................................................................... 5 Menu off Maintenance........................................................................ 5 Tuning to radio stations ................................................. 14 Presetting radio stations ................................................ 14 Functional Overview Sleep timer setting .......................................................... 14 Night mode functions..................................................... 14 Front and Rear panels ...................................................... 6 Remote Control ................................................................ 7 Connections Troubleshooting ......................................15 Connecting the speakers ................................................. 8 Connecting antennas ........................................................ 9 MW Indoor Loop Antenna Specifications .............................................16 FM Indoor Antenna FM Outdoor Antenna Connecting from a DVD and additional components ............................................................................................... 9 Preparations Inserting batteries into the remote control.............. 10 Setting up the surround sound system ...................... 10 Placing the speakers Switching on the system ................................................ 10 Basic Functions Selecting the surround mode ....................................... 11 Selecting the digital sound effect ................................. 11 Dimming the display screen .......................................... 11 Volume control ................................................................ 12 Changing the volume level To switch off the volume temporarily To listen through the headphones Adjusting the tone .................................................. 12 Energy Star As an ENERGY STARR Partner, Philips has determined that this product meets the ENERGY STARR guidelines for energy efficiency. This product complies with the radio interference requirements of the European Community. 4 CONTENTS Introduction and General Information English Features Environmental information The LX700 Digital Home Cinema System creates the same All unnecessary packaging has been omitted. We have tried dynamic sound qualities that you find in full-fledged cinemas to make the packaging easy to separate into three materials: and incorporates some of the best features in home theatre cardboard (box), polystyrene foam (buffer) and polyethylene technology. (bags, protective foam sheet). Your system consists of materials which can be recycled and Features include: reused if disassembled by a specialized company. Please Building-in DTS and Dolby® Digital decoder, observe the local regulations regarding the disposal of supporting Dolby® ProLogic II and virtual packaging materials, exhausted batteries and old equipment. surround Use the Home Cinema Audio System for a movie-theatre surround sound experience. Installation Additional Component Connections If you have stacked the components of your system, the Lets you connect other audio and audio/visual components receiver must be on top. Place the receiver on a flat, hard, to the Receiver so you can use the system’s surround sound stable surface. Do not cover any vents and leave 10 cm speakers. above and 10 cm left and right of the receiver free for Night Mode ventilation. Lets you compress the dynamic range, reducing the difference in volume between different sounds in Dolby Digital mode. Sleep Timer Maintenance Enables the system to switch to standby mode automatically at a preset time. ● Do not expose the receiver or batteries to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Supplied Accessories Always keep the disc tray closed –a remote control with two AA batteries. to avoid dust on the lens. –a MW loop antenna and an FM wire antenna. ● Do not use solvents such as – audio connection cables. benzene, thinner, commercially –five satellite speakers, including five speaker cables. available cleaners, anti-static spray –a passive subwoofer, including a speaker cable. intended for colour discs. –a power cable for connection with the main unit. –4 speaker brackets and 4 screws, –4 mini speaker stands and 8 screws – Instruction booklet – Gettng Started Guide If any item is damaged or missing, please contact your retailer or Philips dealer. INTRODUCTION AND GENERAL INFORMATION 5 English Functional Overview Front and Rear panels 1 2 3 4 C 6 CHANNEL INPUT 5 6 7 8 9 0 1 SURROUND 7 PROGRAM – to select multichannel surround(Dolby Digital, DTS, – in Tuner mode, to program MW/FM stations. Dolby Pro Logic or Dolby Pro Logic II) or stereo 8 SOURCE sound effect. – to select the desired source or external