LIS/2650 LISLE — Feeler Gauges ge STANDARD/HIGH ENERGY SPARK SPARK PLUG GAPPERS DELUXE FEELER GAUGE MINI FEELER GAUGE PLUG GAUGE & GAPPER •For standard and electronic ignitions •31 blades •1 brass blade 0.010” •Precision •16 Steel Blades •Precision blades ensure tora •Gauges and gaps all types of spark plugs blades ensure accurate measurements accurate measurements •Blades from S from 0.020” to 0.100” (0.50 mm to 2.53 •Blades from 0.0015” to 0.035” (0.038 - 0.889 0.010” to 0.035” (0.254 - 0.889 mm) are mm) •Tapered edge for gauging spark plugs mm) thickness are approximately 1/2” wide by approximately 1/4” wide by 1-3/4” long 6SHFLDOO\GHVLJQHGKROHZLWKÀDQJHDGMXVWV 3-1/2” long Part No. 68000. side wire of plug without pressuring centre Part No. 68100. Equipment electrode / Part No. 67870. Tool Tool Part No. Description 67800 Standard 67900 Electronic STANDARD FEELER GAUGE VALVE TAPPET FEELER GAUGE GO-NO-GO FEELER GAUGE s •15 steel blades •One 2” steel rule •Precision •11 Offset Steel Blades •Precision blades are •22 steel blades •Precision stepped blades l blades ensure accurate measurements offset at the proper angle for adjustment of have a 0.002” step for accurate settings oo •Blades from 0.002” to 0.025” (0.051 - 0.635 valve tappets •Blades are approximately 1/2” •Blades from 0.004” to 0.027” (0.102 - 0.686 T d mm) thickness are approximately 1/2” wide by wide by 4” long mm) thickness are approximately 1/2” wide by n 3-1/2” long Part No. 68050. 3-1/4” long Ha Part No. 67950. Part No. 68150. g crapin S / STT/2083 STARRETT® — Precision Tools g uttin Tools OUTSIDE MICROMETER NO. 436 SERIES LIGHT SOLID-ROD INSIDE MICROMETER SET NO. 124 SERIES g C / in •Accurate, rugged, and easy-to-use •The 0-6” sizes and 0-150 mm sizes have rugged spindles •Lightness, ease-of-use, and range •Very useful for measuring inside diameters of cylinders and pg p DQGDQYLOVVL]HGDW´ PP GLDPHWHU&RPSOHWHLQ¿WWHGSODVWLFFDVH&DUELGH rings, measuring parallel surfaces, etc. •The desired range is obtained by assembling rods and lam Bars C y measuring face; ratchet stop and lock nut spacing gauges to the micrometer head •Measuring rods are provided with a shoulder that is / set accurately in the micrometer head and locked in position •Rod diameters are approximately Pr / 1/4” •Each rod has individual length adjustment for the anvil by means of special wrenches g furnished •1/2” movement of screw •6 measuring rods and one 1/2” gauge •Graduation is trikin 0.001” •Range: 2-8” •Complete with protective case S Part No. 124AZ. s Part No. Graduation Range T436.1XRL-1 0.0001” 0-1” T436.1XRL-2 0.0001” 1-2” T436.1XRL-3 0.0001” 2-3” T436.1XRL-4 0.0001” 3-4” T436.1XRL-5 0.0001” 4-5” T436.1XRL-6 0.0001” 5-6” / Precision Tool 436.1MXRL-25 0.01 mm 0-25 mm Part No. Case Only For g 436.1MXRL-50 0.01 mm 25-50 mm 913 2” and 50 mm micrometers 436.1MXRL-75 0.01 mm 50-75 mm 922 3” and 75 mm micrometers 436.1MXRL-100 0.01 mm 75-100 mm 952 4” and 100 mm micrometers 436.1MXRL-125 0.01 mm 100-125 mm 953 5” and 125 mm micrometers / Levellin 436.1MXRL-150 0.01 mm 125-150 mm 954 6” and 150 mm micrometers g easurin M Tools y pecialt S greggdistributors.ca A191 A165.indd 191 2020-10-28 4:08:09 PM.