Micro-light-emitting diodes with quantum dots in display technology Liu, Zhaojun; Lin, Chun-Ho; Hyun, Byung-Ryool; Sher, Chin-Wei; Lv, Zhijian; Luo, Bingqing; Jiang, Fulong; Wu, Tom; Ho, Chih-Hsiang; Kuo, Hao-Chung; He, Jr-Hau Published in: Light: Science and Applications Published: 01/01/2020 Document Version: Final Published version, also known as Publisher’s PDF, Publisher’s Final version or Version of Record License: CC BY Publication record in CityU Scholars: Go to record Published version (DOI): 10.1038/s41377-020-0268-1 Publication details: Liu, Z., Lin, C-H., Hyun, B-R., Sher, C-W., Lv, Z., Luo, B., Jiang, F., Wu, T., Ho, C-H., Kuo, H-C., & He, J-H. (2020). Micro-light-emitting diodes with quantum dots in display technology. Light: Science and Applications, 9, [83]. https://doi.org/10.1038/s41377-020-0268-1 Citing this paper Please note that where the full-text provided on CityU Scholars is the Post-print version (also known as Accepted Author Manuscript, Peer-reviewed or Author Final version), it may differ from the Final Published version. When citing, ensure that you check and use the publisher's definitive version for pagination and other details. General rights Copyright for the publications made accessible via the CityU Scholars portal is retained by the author(s) and/or other copyright owners and it is a condition of accessing these publications that users recognise and abide by the legal requirements associated with these rights. Users may not further distribute the material or use it for any profit-making activity or commercial gain. Publisher permission Permission for previously published items are in accordance with publisher's copyright policies sourced from the SHERPA RoMEO database. Links to full text versions (either Published or Post-print) are only available if corresponding publishers allow open access. Take down policy Contact [email protected] if you believe that this document breaches copyright and provide us with details. We will remove access to the work immediately and investigate your claim. Download date: 06/10/2021 Liu et al. Light: Science & Applications (2020) 9:83 Official journal of the CIOMP 2047-7538 https://doi.org/10.1038/s41377-020-0268-1 www.nature.com/lsa REVIEW ARTICLE Open Access Micro-light-emitting diodes with quantum dots in display technology Zhaojun Liu1, Chun-Ho Lin 2, Byung-Ryool Hyun1, Chin-Wei Sher3,4, Zhijian Lv1, Bingqing Luo5, Fulong Jiang1, Tom Wu2, Chih-Hsiang Ho6,Hao-ChungKuo4 and Jr-Hau He 7 Abstract Micro-light-emitting diodes (μ-LEDs) are regarded as the cornerstone of next-generation display technology to meet the personalised demands of advanced applications, such as mobile phones, wearable watches, virtual/ augmented reality, micro-projectors and ultrahigh-definition TVs. However, as the LED chip size shrinks to below 20 μm, conventional phosphor colour conversion cannot present sufficient luminance and yield to support high- resolution displays due to the low absorption cross-section. The emergence of quantum dot (QD) materials is expected to fill this gap due to their remarkable photoluminescence, narrow bandwidth emission, colour tuneability, high quantum yield and nanoscale size, providing a powerful full-colour solution for μ-LED displays. Here, we comprehensively review the latest progress concerning the implementation of μ-LEDsandQDsindisplay technology, including μ-LED design and fabrication, large-scale μ-LED transfer and QD full-colour strategy. Outlooks on QD stability, patterning and deposition and challenges of μ-LED displays are also provided. Finally, we discuss the advanced applications of QD-based μ-LED displays, showing the bright future of this technology. 1234567890():,; 1234567890():,; 1234567890():,; 1234567890():,; Introduction microdisk LED with a diameter of ~12 μm1. By 2012, the Micro-light-emitting diodes (μ-LEDs) have become the authors had demonstrated prototypes of high-resolution focus of display research because of their excellent (with 12 μm pixel size and 15 μm pitch size) blue and properties in terms of brightness, lifetime, resolution and green microdisplays2. Dawson’s group fabricated flexible efficiency. Over the last decade, the broad prospects for μ- μ-LED arrays and then performed the first demonstration LED applications have attracted a large number of man- of visible light communication with a 40-MHz modula- ufacturers. Sony introduced its first 55-inch full high- tion bandwidth and 120-Mbit/s data transmission rate3. definition (HD) μ-LED TV panel with 1920 × 1080 reso- Lau’s group has been studying microdisplays for more – lution in 2012, which consists of over six million indivi- than a decade4 7. They reported μ-LED displays with 360 dual μ-LEDs. Samsung unveiled the world’s first pixels per inch (PPI) in 2012 and 1700 PPI in 2014. consumer modular µ-LED 146-inch TV in 2018, which is Recently, companies further developed ultrahigh-density named “The Wall”. In the academic field, μ-LEDs have μ-LED displays to over 10,000 PPI. As the world record, in been studied for more than 10 years. In 2000, Jiang’s May 2019, Canadian developer “VueReal” announced group at Kansas State University started to investigate a μ-LED displays that achieve a density of 30,000 PPI with a high brightness of 100,000 nits. The PPI roadmap of the μ-LED display from 2007 to 2019 is shown in Fig. 1. Correspondence: Chih-Hsiang Ho ([email protected]) or Hao- Despite the rapid development of μ-LEDs, most displays Chung Kuo ([email protected]) or Jr-Hau He ([email protected]) 1Department of Electrical and Electronic Engineering, Southern University of with >1000 PPI are based on a monochrome colour Science and Technology, Shenzhen, China scheme, and the panel diagonals are <2 inches. Currently, 2 School of Materials Science and Engineering, University of New South Wales it is still challenging to fabricate full-colour and large- (UNSW), 2052 Sydney, NSW, Australia Full list of author information is available at the end of the article. scale μ-LED displays with ~2000 PPI, and more effort is These authors contributed equally: Zhaojun Liu, Chun-Ho Lin © The Author(s) 2020 Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a linktotheCreativeCommons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/. Liu et al. Light: Science & Applications (2020) 9:83 Page 2 of 23 microns, makes the nonradiative surface recombination VueReal, 2019 (30,000 PPI) more significant14. Consequently, as the device dimension 4 10 shrinks to a few microns, the reduced EQE in red µ-LEDs is more serious than that in blue and green µ-LEDs. Another issue in the RGB µ-LED strategy is the drive 103 voltage mismatch between the RGB pixels. The threshold voltage of the blue LED is ~3.3 V, while that of the red and Pixel per inch (PPI) 102 green counterparts is 1.7 V and 2.2 V, which complicates HKUST, 2007 (73 PPI) the drive circuit design. In contrast, using blue µ-LEDs 2007 2011 2015 2019 with a down-conversion phosphor not only simplifies the Year driving circuitry but also reduces the number of assembly Fig. 1 Pixels per inch roadmap of µ-LED displays from 2007 to 2019 cycles since the µ-LED arrays can be transferred at the same time. To date, there has been extensive research and development on phosphor materials for pc-LEDs12. necessary to develop mature fabrication for future com- However, organic or inorganic phosphors are generally mercial applications. not suitable for µ-LED displays due to their spectral Briefly, µ-LEDs are developed based on established broadness and asymmetry, inherent instability, and the solid-state techniques but with more meticulous fabrica- fact that the red phosphors suffer from low efficiency, tion processes at a higher resolution than those of regular down-conversion energy loss, and low absorption cross- LEDs. In solid-state LEDs, blue and green LEDs are based sections in the blue/UV wavelength region15. Moreover, on InGaN semiconductors, while AlGaInP semi- the particle size of conventional phosphors may be conductors are used for red LEDs8,9. To date, the most comparable to or larger than the µ-LED chip, which is efficient violet and blue LEDs based on wide bandgap problematic. GaN or InGaN alloys reveal several advantages, such as Recently, colloidal quantum dots (QDs) have appeared high efficiency, self-emission (i.e., no extra backlight is as promising emissive materials for replacing organic or required), long lifetime and super-high reliability under molecular phosphors in pc-LEDs16,17. QDs are small harsh environments including high/low temperature, semiconductor crystals with properties that are vastly humidity, sunlight and outer space radiation10. InGaN- different from those of bulk semiconductors as a result of based blue LEDs have reached >80% external quantum their nanoscale size. The most compelling characteristics efficiency (EQE)11, which is the most representative per- of these materials are the tuneability of the semiconductor formance indicator of LEDs and is defined as the ratio of bandgap by varying their size and discrete energy levels, extracted photons over injected carriers.