Install and configure a multi-user networked operating system 114047 PURPOSE OF THE UNIT STANDARD This unit standard is intended: To provide proficient knowledge of the areas covered For those working in, or entering the workplace in the area of Data Communications & Networking People credited with this unit standard are able to: Plan the installation of system software for a multi-user networked operating system Install a multi-user networked operating system Configure a multi-user networked operating system Test the installation and configuration of a multi-user networked operating system Document the installation of multi-user networked operating system The performance of all elements is to a standard that allows for further learning in this area. LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING The credit value of this unit is based on a person having prior knowledge and skills to: Describe data communications Describe types of computer systems and associated hardware configurations Apply problem solving strategies Module 4 – Operating system support skills Author: LEARNER MANUAL Rel Date: 27/01/2018 Rev Date: 01/06/2023 Doc Ref: 48573 LM Mod 4 v-1 PAGE 21 INDEX Competence Requirements Page Unit Standard 114047 alignment index Here you will find the different outcomes explained which you need to be proved 23 competent in, in order to complete the Unit Standard 114047. Unit Standard 114047 25 Plan installation of system software for a multi-user networked operating system 28 Install a multi-user networked operating system 33 Configure a multi-user networked operating system 37 Test the installation and configuration of a multi-user networked operating system 43 Document the installation of a multi-user networked operating system 51 Self-assessment Once you have completed all the questions after being facilitated, you need to check the progress you have made. If you feel that you are competent in the areas mentioned, 54 you may tick the blocks, if however you feel that you require additional knowledge, you need to indicate so in the block below. Show this to your facilitator and make the necessary arrangements to assist you to become competent. Module 4 – Operating system support skills Author: LEARNER MANUAL Rel Date: 27/01/2018 Rev Date: 01/06/2023 Doc Ref: 48573 LM Mod 4 v-1 PAGE 22 Unit Standard 114047 – Alignment Index SPECIFIC OUTCOMES AND RELATED ASSESSMENT CRITERIA SO 1 Plan the installation of system software for a multi-user networked operating system The plan reviews the specification of the computer system software in order to identify and AC 1 explain the feasibility of the specification. The plan specifies milestones and estimates the time and resources required for the AC 2 installation AC 3 The plan ensures that the installation is scheduled to minimise disruption to the users The plan identifies tasks that are vulnerable to standard risks, and assesses the AC 4 probability and impact of those risks The plan identifies measures to be taken to minimise risk, and the contingency measures AC 5 to be adopted in the event of a risk manifesting itself The plan adopts a review procedure which ensures that the final outcome meets user AC 6 requirements according to service level agreements SO 2 Install a multi-user networked operating system AC 1 The installation procedure follows the manufacturer`s guidelines. The installation ensures that the system software operates according to manufacturer`s AC 2 specifications The installation ensures that the system software operates according to the installation AC 3 specification The installation ensures that the pre-installation environment is restored in the event of AC 4 an unsuccessful installation SO 3 Configure a multi-user networked operating system The configuration ensures that the system software is customised according to the AC 1 installation specification The configuration ensures that the customised system software performs according to AC 2 the manufacturers and company installation specifications SO 4 Test the installation and configuration of a multi-user networked operating system The test verifies that the system software functions according to the manufacturer`s AC 1 specification. AC 2 The test procedure meets the manufacturer`s guidelines AC 3 The test verifies that the system software functions in the specified environment The test verifies that the system software communicates with the hardware and other AC 4 application software according to the installation specification SO 5 Document the installation of a multi-user networked operating system AC 1 The documentation specifies the configuration and customisation AC 2 The documentation shows the results of testing AC 3 The documentation includes evidence of acceptance by the user AC 4 The documentation explains basic user operating procedures Module 4 – Operating system support skills Author: LEARNER MANUAL Rel Date: 27/01/2018 Rev Date: 01/06/2023 Doc Ref: 48573 LM Mod 4 v-1 PAGE 23 CRITICAL CROSS FIELD OUTCOMES UNIT STANDARD CCFO WORKING Work effectively with others as a member of an organisation. UNIT STANDARD CCFO ORGANISING Organise and manage him/her self and his/her activities responsibly and effectively. UNIT STANDARD CCFO COLLECTING Collect, analyse, organise, and critically evaluate information. UNIT STANDARD CCFO SCIENCE Use science and technology effectively and critically, showing responsibility towards the environment and health of others. UNIT STANDARD CCFO DEMONSTRATING Demonstrate an understanding of the world as a set of related systems by recognising that problem solving contexts do not exists in isolation. UNIT STANDARD CCFO CONTRIBUTING Contribute to his/her full personal development and the social and economic development of the society at large by being aware of the importance of: reflecting on and exploring a variety of strategies to learn more effectively, exploring education and career opportunities and developing entrepreneurial opportunities ESSENTIAL EMBEDDED KNOWLEDGE 1. Performance of all elements is to be carried out in accordance with organisation standards and procedures, unless otherwise stated. Organisation standards and procedures may cover: quality assurance, documentation, security, communication, health and safety, and personal behaviour. An example of the standards expected is the standards found in ISO 9000 Certified Organisations. 2. Performance of all elements complies with the laws of South Africa, especially with regard to copyright, privacy, health and safety, and consumer rights. 3. All activities must comply with any policies, procedures and requirements of the organisations involved, the ethical codes of relevant professional bodies and any relevant legislative and/ or regulatory requirements. 4. Performance of all elements should be performed with a solid understanding of the use of development tools needed in the areas applicable to the unit standard. Examples of such tools are, but is not limited to CASE tools, programming language editors with syntax checking, program source version control systems Module 4 – Operating system support skills Author: LEARNER MANUAL Rel Date: 27/01/2018 Rev Date: 01/06/2023 Doc Ref: 48573 LM Mod 4 v-1 PAGE 24 All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. SOUTH AFRICAN QUALIFICATIONS AUTHORITY REGISTERED UNIT STANDARD: Install and configure a multi-user networked operating system SAQA ID UNIT STANDARD TITLE 114047 Install and configure a multi-user networked operating system ORIGINATOR SGB Information Systems and Technology FIELD SUBFIELD Field 10 - Physical, Mathematical, Computer and Life Sciences Information Technology and Computer Sciences ABET UNIT STANDARD PRE-2009 NQF LEVEL NQF LEVEL CREDITS BAND TYPE Undefined Regular Level 5 Level TBA: Pre-2009 was 9 L5 REGISTRATION STATUS REGISTRATION START REGISTRATION END SAQA DECISION DATE DATE NUMBER Reregistered 2018-07-01 2023-06-30 SAQA 06120/18 LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT 2024-06-30 2027-06-30 This unit standard does not replace any other unit standard and is not replaced by any other unit standard. PURPOSE OF THE UNIT STANDARD This unit standard is intended: To provide proficient knowledge of the areas covered For those working in, or entering the workplace in the area of Data Communications & Networking People credited with this unit standard are able to: Plan the installation of system software for a multi-user networked operating system Install a multi-user networked operating system Configure a multi-user networked operating system Test the installation and configuration of a multi-user networked operating system Document the installation of multi-user networked operating system The performance of all elements is to a standard that allows for further learning in this area. LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING The credit value of this unit is based on a person having prior knowledge and skills to: Describe data communications Describe types of computer systems and associated hardware configurations Apply problem solving strategies Specific Outcomes and Assessment Criteria: SPECIFIC OUTCOME 1 Plan the installation of system software for a multi-user networked