Universal Security Chip (USC) Supported games (SW2 / SW1 values between brackets) Replacement for WPC-S & WPC-95 games Addams Family Values (2 / 2) Arabian Nights (4 / 7) Installation Instructions SW2 Attack from Mars (4 / 1) 1. Set the DIP-switches on the device to match the game ROM Cactus Canyon (6 / 6) (instructions below) Champion Pub (6 / 3) Cirqus Voltaire (6 / 2) 2. Power off the game 3. Insert the device correctly in the security chip socket Congo (5 / 0) (watch the notch ) U22 for WPC-S, G10 for WPC-95 Corvette (3 / 6) 4. Power on the game Dirty Harry (3 / 0) SW1 Flintstones (2 / 9) Figure 1 Indy 500 (2 / 6) Jackbot (5 / 1) The replacement device can be used in all WPC-S and WPC-95 games. Two DIP- Johnny Mnemonic (4 / 2) switches (4-way) allow you to select the game number. The game number is Junkyard (5 / 2) normally displayed when the game is powered on and can also be found on the Medieval Madness (5 / 9) label of the original security PIC. Monster Bash (6 / 5) The example below shows the startup screen of Attack from Mars (game number NBA Fastbreak (5 / 3) 541). “777777 77777” is the serial number shown by the USC. No Fear (2 / 5) No Good Gofers (6 / 1) Phantom Haus (0 / 1) Pinball Circus (2 / 0) Road Show (2 / 4) Safecracker (0 / 3) Scared Stiff (4 / 8) The Shadow (3 / 2) Theatre of Magic (3 / 9) Enter the 2 least significant digits of the game number on the DIP-switches (using Ticket Tac Toe (0 / 5) a toothpick, for example). For an Attack From Mars the number, “4” needs to be WhoDunnit (4 / 4) set on SW2 (in binary notation) and “1” on SW1 to match the AFM game ROM World Cup Soccer (3 / 1) (see Figure 1). Each DIP-switch can only be set from 0 to 9. Specialties Test Bench (9 / 0) Special Home ROM (9 / 1) 0 1 2 3 4 5 6 7 8 9 Theatre of Magic Home ROM 1.4 (9 / 2) ON ON ON ON ON ON ON ON ON ON 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 A wrong DIP-switch setting does not harm your game - the game will just not If you have any question, please contact us at: play. In this instance, the display will show a U22 error (WPC-S) or a G10 error [email protected] (WPC-95). Power off the game and set the DIP-switches correctly. .