Notice to End Users This UserÕs Guide & Technical Reference is for assisting system manufacturers and end users in setting up and installing the mainboard. Every effort has been made to ensure that the information in this manual is accurate. Soltek Computer Inc. is not responsible for printing or clerical errors. Information in this document is subject to change without notice and does not represent a commitment on the part of Soltek Computer Inc. No part of this manual may be reproduced, transmitted, translated into any language in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the express written permission of Soltek Computer Inc. Companies and products mentioned in this manual are for identification purposes only. Product names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies. SOLTEK COMPUTER INC. PROVIDES THIS MANUAL ÒAS ISÓ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SOLTEK COMPUTER INC. BE LIABLE FOR ANY LOSS OR PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS, OR FOR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND, EVEN IF SOLTEK COMPUTER INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. © Copyright 1998 Soltek Computer Inc. All right reserved Web site: http://www.soltek.com.tw email: [email protected] Edition: April 1998 Version: 2.0 SL–54T5 SERIAL ii Contents iii Contents Chapter 1: Introduction --------------------------------------- 1 Features -------------------------------------------------------------------------1 CPU ------------------------------------------------------------------------1 Chipset -------------------------------------------------------------------- 1 L2 Cache ------------------------------------------------------------------1 Main Memory ----------------------------------------------------------- 1 BIOS ------------------------------------------------------------------------2 I/O Function -------------------------------------------------------------2 Other Functions ---------------------------------------------------------2 Mainboard Setting for Pentium MMX-166----------------------------- 3 Chapter 2: Hardware Setup ---------------------------------- 4 CPU VCORE Voltage Setting---------------------------------------------- 4 JP3: CPU VCore Voltage Setting ----------------------------------- 4 AGP Driver for Win95 Installation -------------------------------------- 5 Requirement -------------------------------------------------------------5 Installation Procedure -------------------------------------------------5 Intel Pentium MMXÐ166/200/233 CPUs ------------------------------6 AMD K6 CPU Settings------------------------------------------------------ 7 AMD K6 Ð 166/200/233/266 CPUs -------------------------------- 7 Cyrix 6x86MX (M2) Ð PR150/166/200/233/266 CPUs ------------- 8 Cyrix 6x86(L) Ð PR133+/PR150+/PR166+/PR200+ CPUs--------- 9 IDT C6 Ð 200/233/266 CPUs ---------------------------------------------- 9 Intel Pentium/AMD K5 Ð 133/166/200 CPUs---------------------- 10 System Memory Configuration----------------------------------------- 10 Jumper Settings ------------------------------------------------------------- 11 JP2: Clear CMOS Data ---------------------------------------------- 11 SW1: 4~6: Bus Ratio Select----------------------------------------- 11 IDE LED Activity Light: (J1 pin1Ð4)------------------------------ 12 Infrared Port Module Connector (J1 pin6Ð10) ----------------- 12 iv J1 pin12, 13: ATX Power Button ---------------------------------- 12 J1 pin14, 15: Reserved ----------------------------------------------- 12 Speaker Connector (J2 pin1Ð4) ------------------------------------ 12 Reset Switch (J2 pin5, 6)--------------------------------------------- 12 Power LED and Keylock Switch (J2 pin8Ð12)------------------ 12 Turbo LED (J2 pin14, 15)-------------------------------------------- 13 USB: USB Connector ------------------------------------------------ 14 J1 Switch Signal Summary ----------------------------------------- 15 J2 Switch Signal Summary ----------------------------------------- 16 Chapter 3: BIOS Setup --------------------------------------- 17 Standard CMOS Setup ---------------------------------------------------- 18 BIOS Features Setup ------------------------------------------------------- 20 Chipset Features Setup --------------------------------------------------- 23 Power Management Setup ----------------------------------------------- 26 PnP/PCI Configuration Setup ------------------------------------------ 28 Load Setup Defaults ------------------------------------------------------- 31 Integrated Peripherals ---------------------------------------------------- 31 Supervisor/User Password---------------------------------------------- 34 IDE HDD Auto Detection ------------------------------------------------ 35 Save & Exit Setup ---------------------------------------------------------- 36 HDD Low Level Format -------------------------------------------------- 36 Exit Without Saving ------------------------------------------------------- 36 Contents v Chapter 1 Introduction Features CPU 1. Supports Intel Pentium P54C/MMX (P55C) CPUs at 90 ~ 233 MHz; 2. Supports Cyrix 6x86(L) CPUs at PR133+ ~ PR200+ MHz and 6x86MX (M2) CPUs at PR166+ ~ PR266+MHz; 3. Supports AMD K5: PR90 ~ PR200, AMD K6: 166 ~ 266MHz, and K6 3D: 250~350MHz; 4. Supports IDT C6: 200 ~ 266MHz; 5. Provides SOCKET 7 ZIF Socket; 6. Supports 75MHz CPU clock; 7. Supports CPU voltage auto detect and switching circuit. Chipset 1. VIA Apollo VP3 chipset; 2. PCI Rev 2.1 and APM1.1/1.2 compliant. L2 Cache 1. Onboard supports 512k write back cache with Pipelined Burst SRAMs. Main Memory 1. Memory range from 4MB (minimum) to 768MB with DRAM Table Free configurations; 2. Supports Fast Page Mode/EDO/Synchronous DRAM with 60ns/70ns DRAM speed; Introduction 1 3. Supports 2pcs 72pin SIMM sockets and 2 pcs of 168pin DIMM sockets (3.3V unbuffered type). BIOS 1. AWARD Plug and Play BIOS; 2. Supports Advanced Power Management Function; 3. Flash Memory for easy upgrade. I/O Function 1. Integrated USB (Universal Serial Bus) controller with two USB ports; 2. Supports 2 IDE channels with 4IDE devices (including 120MB IDE floppy); 3. Provides PCI IDE Bus Master function; 4. One floppy port (including 3.5", 1.2MB Mode 3 function); 5. Two high speed 16550 FIFO UART ports; 6. One parallel port with EPP/ECP/SPP capabilities; 7. PS/2 mouse connector; 8. Infrared module connector. Other Functions 1. AT Form Factor with 22cm x 24cm; 2. 3 PCI Master slots, 3 ISA slots, and 1 AGP slot; 3. Supports SCSI/CD-ROM Boot function. Note: 1. Make sure that the SDRAM module not only has to be 168 pin DIMM but designed for 3.3V unbuffered SDRAM as well. Double check with the SDRAM supplier before install any SDRAMs. The mainboard manufacturer has no obligation to any damage of the board by using the incorrect specification of SDRAM. 2/ Do not mix EDO and SDRAM together for the system stability. 2 Mainboard Setting for Pentium MMX-166 The default settings of the following figure is for the INTEL Pentium MMX-166 with the 512K (or 256K) cache. W83877F/TF MS1 KB1 FLASH BIOS ATX Power Con AT Power Con USB 16 15 COM1 COM2 LPT FDC Con 2 1 SIMM2 SIMM1 PCI SLOTS AGP Slot ISA SLOTS DIMM2 DIMM1 PCI3 PCI2 PCI1 VIA VP3 VT82C586B Li JP2 BAT ISA3 ISA2 ISA1 Clock 1 Gen SW1 1 Off 2 Off JP3 3 Off TAG 8 7 4 On 5 On Pipelined 6 Off SRAM ON CPU FAN 2 1 1 CPU Pipelined IDE1 SRAM IDE2 HD/LED IR PWR/SW J2 J1 SPK RESET KEYLOCK T/LED Figure 1Ð1. SLÐ54T5 Motherboard Layout Introduction 3 Chapter 2 Hardware Setup CPU VCORE Voltage Setting JP3: CPU VCore Voltage Setting V V V V Core JP3 Core JP3 Core JP3 Core JP3 Voltage Voltage Voltage Voltage 2.0V 2.4V 2.8V 3.2V* MMX, 6x86L K6Ð233 2.1V 2.5V 2.9V 3.3V K6Ð166/200 IDT C6 6x86MX (M2) 2.2V K6-266, K6 3D 2.6V 3.0V* 3.4V 3.5V 2.3V 2.7V 3.1V* Pentium (P54C) 6x86 K5 CPU Type VCore Pentium (P54C), 6x86, K5 3.52V MMX (P55C), 6x86L 2.8V IDT C6 3.3V K6-166/200, 6x86MX (M2) 2.9V K6-233 3.2V K6Ð266 2.2V 4 Note: 1. Refer to the table above to choose the correct voltage for the CPU everytime that you install a CPU. 2. Make sure that your JP3 is matched with the CPU voltage, otherwise will damage the CPU or make the system unstable. 3. When the new CPU is announced and is not listed on this manual, please refer to the above table, select the correct voltage setting for it. AGP Driver for Win95 Installation Requirement ¥ Microsoft Windows95OSR2.1 (OSR2.0 with USB upgrade) ¥ Apollo VP3 AGP VxD Driver ¥ AGP VGA Card with Driver ¥ DirectX 5.0 DDK or SDK Installation Procedure Step1 Go to the next step if you are running Win95OSR2.0/2.1, and if not, install Windows95 4.00.950B or later version Step2 Install USBSUPP.EXE program (USB upgrade) Step3 Install Apollo VP3 AGP VxD Driver, run ÒSETUP.EXEÓ program Step4 Install AGP driver for Windows95 Step5 Install Microsoft DirectX 5.0 DDK or SDK To make sure if the Apollo VP3 AGP driver is properly installed, boot up the system and run the ÒRegeditÓ to check if the following path with VIAGARTD exists: ÒHKEY_LOCAL_MACHINES\System\CurrentControlSet\ Services\VxDÓ. Hardware Installation 5 Follow the below procedure to check if the AGP driver is capable to activate: 1. Activate ÒControl Panel,Ó
Details
-
File Typepdf
-
Upload Time-
-
Content LanguagesEnglish
-
Upload UserAnonymous/Not logged-in
-
File Pages41 Page
-
File Size-