Qualification Handbook DAO Level 3 Certificate in Military Engineering (Armoured) Titan and Trojan crew supervision QN: 603/3232/3 The Qualification Overall Objective for the Qualifications This handbook relates to the following qualification: DAO Level 3 Certificate in Military Engineering (Armoured) Titan and Trojan crew supervision Pre-entry Requirements Learners are required to have completed the Class ME (Armd) Class 0-2 course, must be fully qualified AFV crewman and hold full category H driving licence Unit Content and Rules of Combination This qualification is made up of a total of 6 mandatory units and no optional units. To be awarded this qualification the candidate must achieve a total of 13 credits as shown in the table below. Unit Unit of assessment Level GLH TQT Credit number value L/617/0309 Supervise Titan Operation and 3 25 30 3 associated Equipment L/617/0312 Supervise Titan Crew 3 16 19 2 R/617/0313 Supervise Trojan Operation and 3 26 30 3 associated Equipment D/617/0315 Supervise Trojan Crew 3 16 19 2 H/617/0316 Supervise Trojan and Titan AFV 3 10 19 2 maintenance tasks K/617/0317 Carry out emergency procedures and 3 7 11 1 communication for Trojan and Titan AFV Totals 100 128 13 Age Restriction This qualification is available to learners aged 18 years and over. Opportunities for Progression This qualification creates a number of opportunities for progression through career development and promotion. Exemption No exemptions have been identified. 2 Credit Transfer Credits from identical RQF units that have already been achieved by the learner may be transferred. Glossary For the purposes of this qualification the definitions below apply. AB xxx Army Book xxxx AFV Armoured Fighting Vehicle APU Auxiliary Power Unit AVRE Armoured Vehicle Royal Engineer BEMA Bulldozer Earth Moving Attachment CoSTE Control Special to role Equipment CSB Combat Support Bridge / Close Support Bridge EFR Equipment Failure Report ETI Elapsed Time Indicator FWMP Full Width Mine Plough GEMs Suggestion Scheme HSD Hard Surface Device IER Inspectorate of Engineer Resources JAMES Joint Asset Management & Engineering Solution MAPM Maintenance and Procedural Memorandums MFS Monthly Functional Service MSTE Marshall to Role Equipment OHM Oil Health Monitoring OMS Obstacle Marking System SCR Service Counter Revolutions TWMP Track Width Mine Plough 3 Qualification Units URN: L/617/0309 Title: Supervise Titan Operation and associated Equipment Level: 3 Credit value: 3 GLH: 25 TQT: 28 Learning outcomes Assessment criteria The learner will: The learner can: 1 Supervise No 10 1.1 Supervise launch & recovery of No 10 (26) CSB CSB operations 1.2 Supervise reconfigure a No 10 (26) to a No 10 (22) CSB 1.3 Supervise launch & recovery of a No 10 (22) CSB 1.4 Supervise reconfigure a No 10 (22) to a No 10 (26) CSB 1.5 Supervise fitting Trestle Set to a No 10 CSB 1.6 Supervise removing Trestle from a No 10 CSB 1.7 Supervise launch & recovery of No 10 (26) CSB – Folded 1.8 Supervise stripping No 10 CSB in preparation for IER Inspection/ maintenance 1.9 Supervise inverting a CSB panel 1.10 Prepare a No 10 CSB for IER Inspection 1.11 Supervise building a No 10 CSB 2 Supervise No 12 2.1 Supervise launch & recovery of a No 12 CSB CSB operations 2.2 Supervise launch & recovery of 2 x No 12 CSB 2.3 Supervising stripping a No 12 CSB in preparation for IER Inspection/ maintenance 2.4 Prepare a No 12 CSB for IER Inspection 2.5 Supervise building a No 12 CSB 3 Supervise No 11 3.1 Supervise building a No 11 CSB CSB operations 3.2 Supervise launch & recovery of a No 11 CSB 3.3 Supervise stripping a No 11 CSB (Reconfigure to No 10 (26) CSB) 4 Supervise 4.1 Supervise connect & disconnect AVRE Trailer connecting, 4.2 Supervise operation of AVRE Trailer disconnecting & operation of AVRE Trailer 5 Supervise the fitting, 5.1 Supervise the fitting of TWMP onto TITAN removing & 5.2 Supervise fitting & removing HSDs 4 operation of TWMP 5.3 Supervise operation of TWMP 5.4 Supervise removing of TWMP from TITAN 5.5 Supervise TWMP Maintenance 6 Supervise the fitting, 6.1 Supervise fitting BEMA(I) onto TITAN removal & operation 6.2 Supervise operation of BEMA(I) of BEMA (I) 6.3 Supervise removing BEMA(I) from TITAN 6.4 Supervise BEMA Maintenance 7 Supervise the 7.1 Marshal TITAN with AVRE Trailer connected - From the movement of towed ground forward - MSTE 1 equipment whilst 7.2 Marshal TITAN with AVRE Trailer connected - From the marshalling from the ground in reverse - MSTE 2 ground & in a controller role 7.3 Marshal TITAN with AVRE Trailer connected - Through a cone exercise - MSTE 3 8 Control TITAN as a 8.1 Control TITAN as a single vehicle (Non tactical) On public single vehicle (Non roads - CoSTE 2 Tactical) 8.2 Control TITAN as a single vehicle (Non tactical) - Along defined tracks - CoSTE 3 8.3 Control TITAN as a single vehicle (Non tactical) - Negotiate AFV transport - CoSTE 4 8.4 Control TITAN as a single vehicle (Non tactical) - Negotiate current obstacle crossing equipment - CoSTE 5 9 Adhere to the Health 9.1 Explain the relevant requirements of Health and Safety and Safety 9.2 Adhere to the relevant requirements of Health and Safety requirements relevant to TITAN operations Additional information about the unit Unit purpose and aim(s) This unit is about candidates supervising TITAN Armoured Fighting Vehicle and crews during the launch and recovery of Combat Support Bridging (CSB) operations, modifying the configuration of CSBs. Candidates will also be able to supervise the fitting and removal of ancillary equipment to TITAN AFVs and control the AFVs movement. Details of the relationship between Specialist for role equipment, however there is some the unit and relevant National synergy in LO4,5 &6 with: Occupational Standards or other professional standards or curricula COSVR397 Arrange and secure plant or machinery (if appropriate) equipment for transportation MPQPL399 Operate plant attachments This unit maps to the 918 ME (ARMD) Class 1 course Name of the organisation Defence Awarding Organisation submitting the unit 5 URN: L/617/0312 Title: Supervise Titan Crew Level: 3 Credit value: 2 GLH: 16 TQT: 19 Learning outcomes Assessment criteria The learner will: The learner can: 1 Supervise TITAN 1.1 Comply with Standing Orders for the Operation of Armoured Crew Vehicles 1.2 Comply with Health & Safety Regulations 2 Supervise TITAN & 2.1 Supervise Before, During & After Use maintenance associated 2.2 Supervise Periodic maintenance & Oil Health Monitoring equipment (OHM) maintenance 2.3 Supervise No 10 CSB maintenance 2.4 Supervise No 12 CSB maintenance 2.5 Supervise Trestle Set maintenance 3 Supervise the 3.1 Upkeep AB 413 preparation of TITAN 3.2 Provide data for Joint Asset Management & Engineering & associated Solution (JAMES) equipment for 3.3 Maintain AB 6530 inspection 3.4 Complete GEMS, Equipment Failure Report (EFR) & Maintenance and Procedural Memorandum (MAPM) Forms 4 Supervise the 4.1 Supervise refuelling tasks resupply & replenishment of TITAN & associated equipment 5 Adhere to the Health 5.1 Explain the relevant requirements of Health and Safety and Safety 5.2 Adhere to the relevant requirements of Health and Safety requirements relevant to TITAN operations and supervision Additional information about the unit Unit purpose and aim(s) This unit is about candidates supervising TITAN Armoured Fighting Vehicle and crews when preparing to carry out maintenance activities. Details of the relationship between This unit has some synergy with the following NOS: the unit and relevant National 6 Occupational Standards or other SEMPEO2-72 Preparing and Manoeuvring Armoured professional standards or curricula Fighting Vehicles (AFVs) for Maintenance and (if appropriate) Transportation COSVR212 Implement and maintain health, safety, environmental and welfare Practices Name of the organisation Defence Awarding Organisation submitting the unit 7 URN: R/617/0313 Title: Supervise Trojan Operation and associated Equipment Level: 3 Credit value: 3 GLH: 26 TQT: 29 Learning outcomes Assessment criteria The learner will: The learner can: 1 Carry out the duties 1.1 Direct & supervise lifting operations of a Crane 1.2 Assess lifting operation dangers iaw site conditions Supervisor 1.3 Review lifting operations iaw the method statement 2 Carry out the duties 2.1 Select suitable lifting accessories & lifting equipment of a Slinger 2.2 Visually inspect & prepare lifting tackle for use 2.3 Establish weights, balance loads & distances, heights & clearances 2.4 Attach & detach loads 2.5 Direct safe movement of the crane & load during lifting operations 3 Supervise Excavator 3.1 Supervise Excavator movement operations (When 3.2 Supervise movement of the Excavator into the Rail Move using the Excavator position for loading, 3.3 Supervise Excavator operation when building or stripping unloading & during maintenance) FWMP 4 Supervise the 4.1 Supervise loading Midi Pipe Fascine using the Excavator loading & unloading 4.2 Supervise unloading Midi Pipe Fascine using the Excavator of Midi Pipe Fascine 4.3 Supervise launching Midi Pipe Fascine to & from TROJAN 4.4 Supervise recovering Midi Pipe Fascine 4.5 Supervise Fascine Maintenance 5 Supervise 5.1 Supervise connect & disconnect AVRE Trailer connecting, 5.2 Supervise operation of AVRE Trailer disconnecting & 5.3 Connect & disconnect AVRE Trailer using Blow Out Pin to operation of AVRE TROJAN Trailer 6 Supervise the fitting, 6.1 Supervise Building FWMP operation & removal 6.2 Supervise fitting FWMP to TROJAN of FWMP 6.3 Supervise fitting & removing