ME 6402 -Manufacturing Technology - II IV Sem / II Year B.E. (Mechanical Engineering) Department of Mechanical Engineering R.M.K.ENGINEERINGCOLLEGE R.S.M. Nagar, Kavaraipettai – 601 206. UNIT I - THEORY OF METAL CUTTING INTRODUCTION: CUTTING TOOL: SINGLE POINT CUTTING TOOL: NOMENCLATURE SINGLE POINT TOOL: MECHANICS OF METAL CUTTING: TYPES OF CHIPS: COOLANT OR CUTTING FLUIDS OR EMULSIONS: FUNCTIONS OR USES OF COOLANTS OR CUTTING FLUIDS: TYPICAL PROPERTIES OF TOOL MATERIALS: ------------------------------X-------------------------------- UNIT-II - CENTRE LATHE AND SPECIAL PURPOSE LATHE INTRODUCTION: TYPES OF LATHE: SPEED LATHE: CENTRE LATHE OR ENGINE LATHE: BENCH LATHE: TOOL ROOM LATHE: CAPSTAN AND TURRET LATHE: SPECIAL PURPOSE LATHE: AUTOMATIC LATHE: CONSTRUCTION OF LATHE MACHINE: BED: HEAD STOCK: TAIL STOCK: CARRIAGE: THREAD CUTTING MECHANISM: ACCESSORIES AND ATTACHMENTS OF LATHE: SPECIFICATION OF LATHE: LATHE OPERATIONS: TAPERS AND TAPER TURNING: TAPER TURNING BY SWIVELLING THE COMPOUND REST: TAPER TURNING ATTACHMENT METHOD: TAPER TURNING WITH TAILSTOCK SET OVER METHOD: FORM TOOL METHOD: TAPER TURNING WITH DOUBLE HEADS: THREAD CUTTING: DRILLING ON A LATHE: CUTTING SPEED: FEED: ---------------------------X------------------------------ UNIT-III, OTHER MACHINE TOOLS DRILLING INTRODUCTION: CONSTRUCTION OF DRILLING MACHINE: TYPES OF DRILLING MACHINE: PORTABLE DRILLING MACHINE: SENSITIVE DRILLING MACHINE: UPRIGHT DRILLING MACHINE: RADIAL DRILLING MACHINE: GANG DRILLING MACHINE: MULTIPLE-SPINDLE DRILLING MACHINE: TYPES OF DRILLS: TWIST DRILL GEOMETRY: DRILL MATERIAL: OPERATIONS PERFORMED ON DRILLING MACHINE: DRILLING: REAMING: COUNTER BORING: COUNTER SINKING: LAPPING: SPOT FACING: CUTTING SPEED: FEED: SHAPER WORKING PRINCIPLE OF A SHAPER: TYPES OF SHAPERS: CRANK SHAPER: GEARED SHAPER: HYDRAULIC SHAPER: STANDARD SHAPER: UNIVERSAL SHAPER: HORIZONTAL SHAPER: VERTICAL SHAPER: TRAVELLING HEAD SHAPER: PUSH TYPE SHAPER: DRAW TYPE SHAPER: PRINCIPLE PARTS OF SHAPER: SPECIFICATION OF A SHAPER: SHAPER MECHANISM: CRANK AND SLOTTED LINK MECHANISM: SURFACES PRODUCED ON SHAPER: SHAPER OPERATIONS: PLANER WORKING PRINCIPLE OF A PLANER: DIFFERENCE BETWEEN SHAPER AND PLANER: TYPES OF PLANERS: SLOTTER: PRINCIPLE PARTS OF A SLOTTER: OPERATIONS PERFORMED ON A SLOTTING MACHINE: MILLING INTRODUCTION: PRINCIPLE OF MILLING: MILLING METHODS: UP-MILLING OR CONVENTIONAL MILLING PROCEDURE: DOWN-MILLING OR CLIMB MILLING: TYPES OF MILLING CUTTERS: TYPES OF MILLING MACHINES: COLUMN TYPE AND KNEE TYPE MILLING MACHINE: PLANER TYPE MILLING MACHINE: SPECIAL TYPE MILLING MACHINE: SIZE OF MILLING MACHINE: DEPTH OF CUT: INDEXING AND MOVING HEADS: PLAIN OR SIMPLE DIVIDING HEAD: OPERATIONS PERFORMED ON MILLING MACHINE: UNIT-IV, ABRASIVE PROCESSES AND GEAR CUTTING MACHINE CONFIGURATION: UNIT-V, CNC MACHINE TOOLS AND PART PROGRAMMING INTRODUCTION: INTERPRETER: TWO MARK QUESTIONS UNIT-I UNIT-II UNIT-III UNIT-IV UNIT-V PART-B QUESTIONS UNIT-I UNIT-II UNIT-III UNIT-IV UNIT-V .