ISO Update Supplement to ISOfocus March 2019 International Standards in process ISO/CD Machinery for Forestry — Winches — Dimen- 19472-2 sions, performance and safety — Part 2: Part An International Standard is the result of an agreement between 2: Tethering & Tractions Assistance Winches the member bodies of ISO. A first important step towards an Interna- ISO/CD Machinery for forestry — Safety requirements tional Standard takes the form of a committee draft (CD) - this is cir- 11680-1 and testing for pole-mounted powered prun- culated for study within an ISO technical committee. When consensus ers — Part 1: Machines fitted with an integral has been reached within the technical committee, the document is combustion engine sent to the Central Secretariat for processing as a draft International ISO/CD Machinery for forestry — Safety requirements Standard (DIS). The DIS requires approval by at least 75 % of the 11680-2 and testing for pole-mounted powered pruners member bodies casting a vote. A confirmation vote is subsequently — Part 2: Machines for use with back-pack carried out on a final draft International Standard (FDIS), the approval power source criteria remaining the same. TC 24 Particle characterization including sieving ISO/CD Particle size analysis — Image analysis 13322-2 methods — Part 2: Dynamic image analysis methods TC 30 Measurement of fluid flow in closed conduits CD registered ISO/CD 5167-3 Measurement of fluid flow by means of pres- sure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles Period from 01 February to 28 February 2019 TC 31 Tyres, rims and valves These documents are currently under consideration in the technical committee. ISO/CD 4250-3 Earth-mover tyres and rims — Part 3: Rims They have been registred at the Central Secretariat. TC 34 Food products ISO/CD 6888-1 Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of TC 6 Paper, board and pulps coagulase-positive staphylococci (Staphylo- ISO/CD 14778 Paper and board — Measurement of water coccus aureus and other species) — Part 1: contact angle by optical methods Technique using Baird-Parker agar medium TC 20 Aircraft and space vehicles ISO/CD 6888-2 Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of ISO/CD 21442 Space systems — General requirements for coagulase-positive staphylococci (Staphylo- control engineering coccus aureus and other species) — Part 2: ISO/CD 22591 Space systems — Satellite-based service for a Technique using rabbit plasma fibrinogen agar snowplow support system medium ISO/CD 22772 Space systems — Requirements of launch ISO/CD 6888-3 Microbiology of food and animal feeding stuffs vehicle (LV) to electrical ground support equip- — Horizontal method for the enumeration of ment (EGSE) interfaces coagulase-positive staphylococci (Staphylo- coccus aureus and other species) — Part 3: TC 21 Equipment for fire protection and fire Detection and MPN technique for low numbers fighting ISO/CD 23349 Animal and vegetable fats and oils — De- ISO/CD 7240-3 Fire detection and alarm systems — Part 3: termination of sterols and stanols in foods Audible alarm devices and dietary supplements containing added TC 22 Road vehicles phytosterols ISO/CD 7637-2 Road vehicles — Electrical disturbances from TC 39 Machine tools conduction and coupling — Part 2: Electrical ISO/CD 28881 Machine tools — Safety — Electro-discharge transient conduction along supply lines only machines ISO/DTS Road Vehicles — Electrical disturbance by TC 43 Acoustics 7637-4 conduction and coupling — Part 4: Electrical transient conduction along shielded high volt- ISO/CD Acoustics — Noise from shooting ranges — age supply lines only 17201-6 Part 6: Sound exposure at close range of the sound source ISO/CD Road vehicles — Component test methods for 11452-9 electrical disturbances from narrowband radiat- TC 45 Rubber and rubber products ed electromagnetic energy — Part 9: Portable ISO/CD Rubber and plastics hoses and tubing — transmitters 10619-2 Measurement of flexibility and stiffness — Part ISO/DTS Road vehicles — Connection interface for 2: Bending tests at sub-ambient temperatures 19072-5 pyrotechnic devices, two-way and three-way TC 46 Information and documentation connections — Part 5: Pyrotechnic device and harness connector assembly - type 3 (only ISO/CD 3166-1 Codes for the representation of names of coun- two-way) tries and their subdivisions — Part 1: Country codes TC 23 Tractors and machinery for agriculture and forestry ISO/CD 3166-2 Codes for the representation of names of coun- tries and their subdivisions — Part 2: Country ISO/CD 22494 Disc plough-- Specifications and test method subdivision code ISO/CD 22495 Chisel plough- specifications and test method. ISO Update, Supplement to ISO Focus -- March 2019 1 ISO/CD 3166-3 Codes for the representation of names of coun- TC 188 Small craft tries and their subdivisions — Part 3: Code for ISO Small craft — Fire-resistant fuel hoses — formerly used names of countries 7840:2013/CD Amendment 1 ISO/DTR Information and documentation — Records Amd 1 22428 management in the cloud: Issues and concerns ISO Small craft — Non-fire-resistant fuel hoses — TC 61 Plastics 8469:2013/CD Amendment 1 ISO/CD Plastics — Evaluation of the adhesion interface Amd 1 19095-6 performance in plastic-metal assemblies — TC 195 Building construction machinery and Part 6: Accelerated degradation test equipment TC 82 Mining ISO/CD Building construction machinery and equip- ISO/CD 20305 Mine closure and reclamation terminology 21573-2 ment — Concrete pumps — Part 2: Procedure for examination of technical parameters ISO/CD 21795 Mine Closure and Reclamation Management Planning TC 204 Intelligent transport systems TC 85 Nuclear energy, nuclear technologies, ISO/DTR Electronic fee collection — System architecture and radiological protection 17573-2 for vehicle related tolling — Part 2: Terminology ISO/DTR Evaluating the performance of continuous air ISO/DTS Electronic fee collection — Support for traffic 22930-1 monitors — Part 1: Air monitors based on ac- 21192 management cumulation sampling techniques ISO/CD Intelligent transport systems — Nomadic ISO/DTR Evaluating the performance of continuous 22085-2 device service platform for micro mobility — 22930-2 air monitors — Part 2: Air monitors based on Part 2: Functional requirements and data set flow-through sampling techniques without definitions accumulation TC 211 Geographic information/Geomatics TC 113 Hydrometry ISO/CD 19170 Geographic information — Discrete global grid ISO/CD 23350 Hydrometry -Precipitation measuring devices systems TC 121 Anaesthetic and respiratory equipment TC 212 Clinical laboratory testing and in vitro diagnostic test systems ISO/CD 23371 Anaesthetic and respiratory equipment — Cuff pressure indication devices ISO/CD In vitro diagnostic medical devices — Multi- 21474-1 plex molecular testing for nucleic acids — Part TC 127 Earth-moving machinery 1: Terminology and general requirements for ISO/DTS Earth-moving machinery — Functional safety nucleic acid quality evaluation 19014-5 — Part 5: Tables of performance levels ISO/DTS Guidance for supervisors and operators of TC 130 Graphic technology 22583 point-of-care testing (POCT) devices ISO/CD 2836 Graphic technology — Prints and printing TC 216 Footwear inks — Assessment of resistance of prints to ISO/DTR Footwear — Performance requirements for various agents 20572 components for footwear — Accessories ISO/CD Graphic technology — Process control for the ISO/DTR Footwear — Performance requirements for 12647-6 production of half-tone colour separations, 20879 components for footwear — Uppers proofs and production prints — Part 6: Flexog- raphic printing ISO/DTR Footwear — Performance requirements for 20880 components for footwear — Outsoles ISO/DTS Image quality evaluation methods for printed 18621-11 matter — Part 11: Colour gamut analysis ISO/DTR Footwear — Performance requirements for 20881 components for footwear — Insoles ISO/CD 22934 Graphic technology — Communication of paste ink properties ISO/DTR Footwear — Performance requirements for 20882 components for footwear — Lining and insocks TC 147 Water quality ISO/DTR Footwear — Performance requirements for ISO/CD 13162 Water quality — Determination of carbon 14 20883 components for footwear — Shanks activity — Liquid scintillation counting method ISO/DTR Footwear — Performance requirements for TC 156 Corrosion of metals and alloys 22648 components for footwear — Stiffeners and ISO/CD 23449 Corrosion of metals and alloys — Multielec- toepuffs trode Arrays for Corrosion Measurement TC 218 Timber TC 159 Ergonomics ISO/CD 24294 Timber — Round and sawn timber ISO/CD TS Ergonomics — Accessible design — Doors and — Vocabulary 24507 handles of consumer products TC 229 Nanotechnologies TC 163 Thermal performance and energy use ISO/DTS Nanotechnologies — Characterization of in the built environment 10798 carbon nanotubes using scanning electron microscopy and energy dispersive X-ray ISO/CD 9229 Thermal insulation — Vocabulary spectrometry TC 164 Mechanical testing of metals ISO/DTS Nanotechnologies — Nano-enhanced air filter ISO/DTR Mechanical tests on metallic materials — Un- 21237 media using nanofibres — Characteristics, 15262 certainty in low-cycle fatigue performance and measurement methods ISO/CD 22407 Metallic materials — Fatigue testing — Axial TC 249 Traditional Chinese medicine plane bending method ISO/CD 23191 Traditional Chinese medicine