Specifications General Specifications Amplifier Section Rated Output Power (FTC) (North American) With 8 ohm loads, both channels driven, from 20­20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. Surround Mode Output Power (＊) (6 ohms, 1 kHz THD 0.9%) 170 W per channel ＊ Reference output for each speakers. Depending on the source and the listening mode settings, there may be no sound output. Dynamic Power (＊) ＊ IEC60268­Short­term maximum output power 240 W (3 Ω, Front) 210 W (4 Ω, Front) 120 W (8 Ω, Front) THD+N (Total Harmonic Distortion+Noise) 0.08% (20 Hz ­ 20,000 Hz, half power) Input Sensitivity and Impedance (1 kHz 100 W/8 Ω) 200 mV/47 kΩ (LINE (Unbalance)) 3.5 mV/47 kΩ (PHONO MM) Rated RCA Output Level and Impedance 1 V/470 Ω (SUBWOOFER PRE OUT) 200 mV/2.3 kΩ (ZONE LINE OUT) 2 V/2.3 kΩ (ZONE PRE OUT) Phono Overload 70 mV (MM 1 kHz 0.5%) Frequency Response 5 Hz ­ 100 kHz/+1 dB, –3 dB (Pure Direct) Tone Control Characteristics ±10 dB, 90 Hz (BASS) ±10 dB, 7.5 kHz (TREBLE) Signal to Noise Ratio 106 dB (IHF­A, LINE IN, SP OUT) 80 dB (IHF­A, PHONO IN, SP OUT) Speaker Impedance 6 Ω ­ 16 Ω Headphone Output Impedance 330 Ω Headphone Rated Output 90 mW (32 Ω, 1 kHz, 10% THD) Video Section Signal level 1 Vp­p/75 Ω (Composite Video) 1 Vp­p/75 Ω (Component Video Y) 0.7 Vp­p/75 Ω (Component Video B/R) Maximum resolution supported by component video 480i/576i Tuner Section FM Tuning Frequency Range 87.5 MHz ­ 107.9 MHz AM Tuning Frequency Range 530 kHz ­ 1710 kHz Preset Channel 40 Network Section Ethernet LAN 10BASE­T/100BASE­TX Wireless LAN IEEE 802.11 a/b/g/n standard (Wi­Fi® standard) 5 GHz/2.4 GHz band BLUETOOTH Section Communication system BLUETOOTH Specification version 4.1+LE Frequency band 2.4 GHz band Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles A2DP 1.2 AVRCP 1.3 HOGP­Host (Client) HOGP­HID Device (Server) HID Service (HIDS) Supported Codecs SBC AAC Transmission range (A2DP) 20 Hz ­ 20 kHz (Sampling frequency 44.1 kHz) Maximum communication range Line of sight approx. 15 m (＊) ＊ The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. General Power Supply AC 120 V, 60 Hz Power Consumption 580 W 0.1 W (Stand­by) 65 W (No­sound) 5.0 W (HDMI Standby Through) 2.4 W (Network Standby) Dimensions (W × H × D) 435 mm × 173 mm × 370.5 mm 17­1/8" × 6­13/16" × 14­9/16" Weight 10.0 kg (22.0 lbs.) HDMI Input IN1 (BD/DVD, HDCP2.2), IN2 (CBL/SAT, HDCP2.2), IN3 (STRM BOX, HDCP2.2), IN4 (GAME), IN5, IN6, AUX INPUT HDMI (front) Output OUT MAIN (ARC), OUT SUB Supported Deep Color, x.v.Color™, LipSync, Audio Return Channel, 3D, 4K 60Hz, CEC, Extended Colorimetry (sYCC601, Adobe RGB, Adobe YCC601), Content Type, HDR Audio Format Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS, DTS:X (to be supported in a future update), DTS­HD Master Audio, DTS­HD High Resolution Audio, DTS 96/24, DTS­ES, DTS­HD Express, DSD, PCM Maximuｍ Video Resolution 4k 60 Hz (YCbCr 4:4:4) Video Inputs Component IN1 (BD/DVD) Composite IN1 (CBL/SAT), IN2 (STRM BOX) Compatible input resolutions HDMI input 4K, 1080p/24, 1080p, 1080i, 720p, 480p/576p Component input 480i/576i Composite input 480i/576i The output from the HDMI OUT jack to the TV is the same resolution as the input. When using a TV that supports 4K, 1080p HDMI video signals can also be output as 4K. Audio Inputs Digital OPTICAL 1 (BD/DVD), 2 (TV) COAXIAL (CD) Analog BD/DVD, CBL/SAT, STRM BOX, CD, PHONO, AUX (front) Audio Outputs Analog ZONE2 PRE/LINE OUT 2 SUBWOOFER PRE OUT Speaker Outputs FRONT L/R, CENTER, SURROUND L/R, BACK or Bi­Amp L/R, HEIGHT L/R or SPB L/R, ZONE2 L/R (Ready to receive banana plugs) Phones PHONES (Front, ø 6.3 mm, 1/4") Others Setup Mic : 1 (Front) USB : 1 (Ver. 2.0, 5 V/1 A) Ethernet : 1 RS232 : 1 12V TRIGGER OUT : (A : 100 mA, B : 25 mA) IR IN : 1 IR OUT : 1 Power consumption in standby mode In the following cases, the power consumption in standby mode may reach up to a maximum of 12 W: – When "Network Standby" is set to "On" – When "HDMI CEC" is set to "On" – When "HDMI Standby Through" is set to other than "Off" – When "Bluetooth Wakeup" is set to "On" – When "USB Power Out at Standby" is set to "On" Specifications and features are subject to change without notice. Specifications About HDMI Compatible functions HDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Blu­ray Disc/DVD players, set­top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and digital audio (2 ch PCM, multichannel digital audio, and multichannel PCM). HDMI CEC functionality: By connecting devices and HDMI cables that comply with the CEC (Consumer Electronics Control) specification of the HDMI standard, a variety of linked operation become possible between devices. You can enjoy features such as linking input switching with the input selector and players, control volume using the remote controller of the TV, and automatically switching this unit to standby when the TV is turned off. The unit is designed to link with products that comply with the CEC standard, and that linked operation is not always guaranteed with all CEC devices. For linked functions to work properly, do not connect more CEC­compliant components than the quantities specified below, to the HDMI jack. Blu­ray Disc/DVD players: up to 3 units Blu­ray Disc/DVD recorders: up to 3 units Cable TV tuner, terrestrial digital tuner, and satellite broadcasting tuner: up to 4 units Operation has been confirmed on the following devices from other manufacturers: (As of February 2016) Toshiba brand televisions; Sharp brand televisions; Toshiba brand players and recorders; Sharp brand players and recorders (when used with a Sharp brand television) ARC（Audio Return Channel） : By connection a TV that supports ARC with a single HDMI cable, you can not only output the audio and video from this unit to the TV, but also input the audio from the TV to this unit. HDMI Standby Through: Even if this unit is in standby, the input signals from AV components are transmitted to the TV. Deep Color: By connecting devices supporting Deep Color, video signals input from the devices can be reproduced on the TV with even more colors. x.v.Color™: This technology realizes even more realistic colors by broadening the color gamut. 3D: You can transmit 3D video signals from AV components to the TV. 4K: This unit supports 4K (3840×2160p) and 4K SMPTE (4096×2160p) video signals. LipSync: This setting automatically corrects any desynchronization between the video and audio signals based on data from the HDMI LipSync compatible TV. Copyright Protection: The unit supports Revision 1.4 and Revision 2.2 (HDMI OUT MAIN/SUB and HDMI IN1 to 3 only) of the HDCP (High­bandwidth Digital Content Protection), a copy­protection system for digital video signals. Other devices connected to the unit must also support HDCP. Supported Audio Formats 2 ch linear PCM: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Multi­channel linear PCM: Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Bitstream: Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS:X (to be supported in a future update), DTS­HD High Resolution Audio, DTS­HD Master Audio DSD: Supported sampling rates: 2.8 MHz Your Blu­ray Disc/DVD player must also support HDMI output of the above audio formats. Supported resolutions HDMI IN1 to IN3: Copyright protection technology: HDCP1.4/HDCP2.2 Color space (Color Depth): – 720×480i 60Hz, 720×576i 50Hz, 720×480p 60Hz, 720×576p 50Hz, 1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p 24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p 24/25/30/50/60Hz, 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096×2160p) 50/60Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit), YCbCr4:2:0 (8/10/12 bit) HDMI IN4 to IN6, Front: Copyright protection technology: HDCP1.4 Color space (Color Depth): – 720×480i 60Hz, 720×576i 50Hz, 720×480p 60Hz, 720×576p 50Hz, 1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p 24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p 24/25/30/50/60Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096×2160p) 50/60Hz : YCbCr4:2:0 (8 bit) Settings System Setup The unit allows you to configure advanced settings to provide you with an even better experience.