Journal of Chemistry

Journal of Chemistry

ISSN: 2319-9849 Research and Reviews: Journal of Chemistry Synthesis and Characterization of Benzothiazole and Thiazole Substituted Acetamide Derivatives of Sydnones Himanshu D Patel1, Shahrukh T Asundaria2, Keshav C Patel*2, Kalpesh M Mehta2, Paresh S Patel3, Lina A Patel4 1Department of Chemistry, Silvassa Institute of Higher Learning, Government Aided College of Arts, Commerce and Science, DNHUSS, Silvassa – Naroli – 396235, (U. T. of D & NH) India. 2Department of Chemistry, Veer Narmad South Gujarat University, Udhna-Magdalla Road, Surat - 395007 (Gujarat) India. 3Department of Chemistry, Narmada College of Science and Commerce, Zadeshwer, Bharuch - 392011 (Gujarat) India. 4Department of Chemistry, CU Shah Science College, Ashram Road, Ahmedabad – 380014 (Gujarat) India. Article Received: 12/03/2013 Revised: 29/03/2013 Accepted: 30/03/2013 ABSTRACT *For Correspondence: Two novel series of mesoionic compounds containing benzothiazole and thiazole based sydnone derivatives were synthesized. All the synthesized compounds Department of Chemistry, Veer have been characterized by physical methods (melting point, TLC and elementary Narmad South Gujarat University, analysis) and by spectral techniques (IR, 1H NMR and 13C NMR). Udhna-Magdalla Road, Surat - 395007 (Gujarat) India. Keywords: Synthesis, Benzothiazole, Thiazole, Sydnone. INTRODUCTION The effectiveness of mesoionic compounds as a chemotherapeutic agent is well established [1,2,3,4] and their chemistry has been studied. A literature survey revealed that sydnones display potent biological activity [5,6,7,8,9]. Feprosidnine (sydnophen) is a CNS- stimulant drug in which the sydnone imine group is found as sub-structure [10]. Sydnones occupy a unique place among mesoionic compounds [11]. The sydnone ring displays electron-withdrawing character at N3 and electron-donating properties at C4. The hydrogen atom of sydnone ring undergoes substitution with variety of electrophiles [12]. Although various 4-substituted sydnones have been reported over last seven decades, no method has been reported to synthesize acetamide derivatives of sydnones. The thiazole ring found to be a part of many natural products. We now report the synthesis of new sydnones bearing acetamide groups at position 4 in high yields. 3-(4-Chlorophenyl)sydnone (4) was prepared in improved yields according to the literature procedure [20]. 2- Chloro-N-(substituted-1,3-benzothiazol-2-yl)acetamide (5) and 2-chloro-N-[4-(aryl)-1,3-thiazol-2-yl]acetamide (6) were synthesized by procedures reported in the literature [13,14,15]. Reaction of 3-(4-chlorophenyl)sydnone (4) with 5 and 6 in the presence of triethylamine gave the C-substituted sydnones 7 and 8 in good yields (70-85 %). Since abstraction of the C4 hydrogen of sydnones usually requires strong bases such as Grignard or organolithium reagents [16,17,18], it is likely that the activated halides in our case are first attacked by the C4 atom followed by removal of the proton by triethylamine. There are no reported cases of alkylation of sydnones by simple alkyl halides in the presence of triethylamine. All the compounds gave satisfactory combustan analyses and were characterized by elemental analysis, IR, 1H NMR and 13C NMR data. Spectral data for the new compounds are consistent with the assigned structures. MATERIALS AND METHODS Mps were recorded using an electrothermal melting point apparatus and are uncorrected. TLC was performed on E-Merck pre-coated 60 F254 plates and the spots were rendered visible by exposing the plates to UV light. CHN analyses were carried out on a RRJC | Volume 2 | Issue 2 | April – June, 2013 20 ISSN: 2319-9849 Carlo Erba 1108. The infrared spectra were scanned on a Nicolet-400D spectrometer. NMR spectra were recorded on Brucker Avance II NMR spectrometer. Chemical shifts (δ) refer to internal tetramethylsilane. Ethyl N-(4-Chlorophenyl)glycinate (1). 4-Chloroaniline (1.40 g, 0.01 mol), ethyl chloroacetate (1.06 mL, 0.01 mol) and anhydrous sodium acetate (1.64 g, 0.02 mol) were refluxed in ethanol (10 mL) for 5 hours. The mixture was diluted with 10 mL of water and kept in refrigerator over night. Recrystallization from ethanol afforded 1.86 g. (81%), mp. 115-117 ºC, lit.19 mp. 94 oC. IR (KBr): 3328, 1 2951, 2933, 2887, 1757, 1072; H NMR (400 MHz, DMSO-d6): δ 1.21 (t, 3H, COOCH2CH3), 3.76 (s, 1H, NH), 4.29 (s, 2H, CH2), 4.54 (q, 13 2H, COOCH2CH3), 6.83-7.21 (m, 4H, Ar-H); C NMR (40 MHz, DMSO-d6): δ 14.67, 44.78, 61.29, 115.12, 123.22, 128.96, 146.26, 172.11 N-(4-Chlorophenyl)glycine (2). Ethyl N-(4-chlorophenyl)glycinate (2.13 g, 0.01 mol) and sodium hydroxide (0.6 g, 0.015 mol) in solution of aqueous ethanol (18 mL:4 mL) was heated for 0.5 hour. It was then cooled in ice and acidified with conc. hydrochloric acid till complete precipitation. The crystalline white product obtained was recrystallized from ethanol to yield 1.29 g. (70 %), mp. 19 o 1 145-147 ºC. lit. mp. 144 C. IR (KBr): 3323, 3278-2521, 2954, 2937, 2881, 1705, 1067; H NMR (400 MHz, DMSO-d6): δ 4.33 (s, 13 2H, CH2), 6.44 (s, 1H, COOH), 6.52 (s, 1H, NH), 6.88-7.23 (m, 4H, Ar-H); C NMR (40 MHz, DMSO-d6): δ 44.98, 114.32, 123.26, 129.10, 146.07, 172.18. (4-Chlorophenyl)-N-nitrosoglycine (3). To a solution of N-(4-chlorophenyl)glycine (1.86 g, 0.01 mol) in conc. hydrochloric acid (20 mL), a solution of sodium nitrite (0.69 g, 0.01 mol) in water (5 mL) was added dropwise at 0-5 oC with stirring for 2 hour. The product obtained was collected and recrystallized from ethanol to yield 1.67 g. (78%) of pale yellow solid, mp. 104-106 ºC. lit.20 mp. 113 ºC. 1 IR (KBr): 3257-2526, 2925, 2853, 1712, 1571, 1328, 1065; H NMR (400 MHz, DMSO-d6): δ 5.02 (s, 2H, CH2), 6.93-7.48 (m, 4H, Ar- 13 H), 11.56 (s, 1H, COOH); C NMR (40 MHz, DMSO-d6): δ 49.43, 120.78, 128.31, 130.46, 138.89, 168.24. 3-(4-Chlorophenyl)sydnone (4). The mixture of (4-chlorophenyl)-N-nitrosoglycine (2.70 g, 0.0126 mol) and acetic anhydride (15 mL) was stirred at room temperature for 12 hours in a dark. The solution was poured slowly into cold water with vigorous stirring. The pH of the solution was adjusted to 7.0 with 10 % sodium bicarbonate solution. The crude sydnone obtained was washed well with water and dried. Recrystallization from ethanol afforded yield 2.14 g. (87 %) of colorless solid. mp. 140-145 ºC. lit. [21] mp. 110-112 oC. IR 1 13 (KBr): 3178, 1750, 1056; H NMR (400 MHz, DMSO-d6): δ 7.21 (s, 1H, sydnone), 7.52-8.16 (m, 4H, Ar-H); C NMR (40 MHz, DMSO- d6): δ 124.12, 128.55, 130.63, 135.22, 140.92, 169.19 General Procedure for synthesis of N-(Substituted-1,3-benzothiazol-2-yl) and N-(4-Substituted-1,3-thiazol-2-yl)-2-chloro acetamide 5a-j [9,10,11]. The substituted benzothiazole or thiazole (0.01 mol) was dissolved in benzene (25 mL) and stirred for 30 minute at 0-5 0C. Chloroacetyl chloride (0.8 mL, 0.01 mol) was then added dropwise over 2 hrs. The mixture was heated at reflux for 2 hrs. Removal of solvent by distillation gave crude solid which was recrystallized from methanol. 4-{2-[(6-Chloro-1,3-benzothiazol-2-yl)amino]-2-oxoethyl}-3-(4-chlorophenyl) sydnone (7a). To a solution of 3-(4- chlorophenyl)sydnone (1.96 g, 0.01 mol) in acetone (25mL) was added 2-chloro-N-(6-chloro-1,3-benzothiazol-2-yl)acetamide (4.21 g, 0.01 mol) and 2-3 drops of triethylamine. After 6 hrs of reflux, the reaction mixture was cooled and poured into ice. The solid product obtained was collected and dried. Recrystallization from methanol yielded 3.27 g. (78 %) of colorless solid. The analogues 7b-e were prepared and purified as in the procedure given for 7a. The analogues 8a-e were prepared and purified as in the procedure given for 7a ClCH2CO2C2H5 NaOH Cl NH2 Cl NHCH2CO2Et Cl NHCH2CO2H NaOAc 1 2 NaNO , HCl Ac O 2 2 + Cl NHCH2CO2H Cl N CH 0 - 5 °C R.T NO N - O O 3 4 Scheme 1 RRJC | Volume 2 | Issue 2 | April – June, 2013 21 ISSN: 2319-9849 N benzene N NH2 + ClCH2COCl 0 - 5 °C ClCH2CONH S S R R 5 (a) R = 6-Cl (b) R = 6-SO3H (c) R = 6-NHCOCH3 (d) R = 6-CH3 (e) R = H (f) R = 6-OCH3 (g) R = 6-NO2 (h) R = 4,6-Cl (i) R = 4,6-NO2 (j) R = 6-F R N NH2 benzene N + ClCH2COCl S 0 - 5 °C ClCH2CONH S R 6 (a) R = 4-OH (b) R = 4-NO2 (c) R = 4-F (d) R = 4-Cl (e) R = 4-CH3 (f) R = 4-OCH3 (g) R = 2,4-Cl (h) R = 2-OH (i) R = 2,4-NO2 (j) R = H N R NH S Cl N C N + O O O 5 7 Cl N CH N + O O 6 5 N NH S Cl N C R1 N + O O O 8 Scheme 2 RESULTS AND DISCUSSION The IR spectrum of 5 showed absorption bands at 1750 cm-1 for C=O stretching of sydnone ring. The IR spectra of these products generally showed absorption bands at 1745-1778 cm-1 for C=O group of the sydnone ring and the peaks at 1664-1693 cm- 1 are attributed to the C=O of the amide linkage and the 663-693 cm-1 bands are due to C-S-C stretching of thiazole and 1 benzothiazole ring.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    8 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us