ARK-X Series UNIVERSAL DRIVER www.screen.it 2 ARK-X ARK-X SERIES ARK-X UNIVERSAL DRIVER New Multiple Configuration Flexible Hardware Platform Multiple Front-End Boards Flexible Software configuration and fully frequency agile Transmitter, Gap Filler, Transposer, Re-Transmitter Dual cast Analog + Digital Multi standard Widely improved performances compared to ARK6 3 4 ARK-X Transmitter, Gap Filler, Transposer, Re-Transmitter ARK-X Features Dual cast Analog + Digital Multi standard ARK-X UNIVERSAL DRIVER can be customised in 5 different configurations. The New ARK-X UNIVERSAL DRIVER can be configured with just New improved features compared to the software selection and implements DVB-T/T2, ATSC, ISDB-T, DTMB, previous series: ATV modulations. Color large-sized display with important monitoring measures: it can be used as a Transmitter, Gap Filler, Heterodyne Transposer, spectrum, constellation, etc Regenerative Transmitter, Dual Cast Analog + Digital Multistandard Upgrade through USB ARK-X UNIVERSAL DRIVER allows the selection of operation modes Upgrade through OTA and total remote control: Licensing upgrade • remotely, using a dry contact; T2 + T2 lite simultaneous mode • via TCP/IP, using a LAN connection, web graphic interface and a ISDB-Tb De-Compressor Embedded standard web browser Property Crest Factor optimization algorithm (PAPR equivalent) • via built-in SNMP; Powerful pre-corrections to improve efficiency • via a dedicated command inserted into the transport stream. GPS Glonass, Galileo, BeiDou integrated ARK-X UNIVERSAL DRIVER optimizes the investments of both 2 input IP redundant with seamless switch (GBE Gigabit Ethernet) international broadcasters, reducing the transmitter types and Pluggable Front End national broadcasters, thanks to its versatility in operation modes and New user-friendly web interface configuration. ARK-X UNIVERSAL DRIVER is future-proof and guarantees a perfect Backward full compatibility with all ARK 6 based TX upgrade path for new modulation schemes that will be delivered. Energy-saving system (automatic power reduction scheduler) The previous series ARK-6 can be upgraded to the new features. Anti-thief system ATSC 3.0 ready 5 Main Common Features Main Features ISDB-Tb Version ASI MPEG-2 TS seamless input. Signal modulation compliant with: MPEG-2 TS over IP TS 102 034 V1.5.2 (2014-04). ABNT NBR 15601 & ABNT NBR 15608-1 (ISDB-Tb) MPEG-2 TS encapsulated in RTP (Real-time Transport Protocol BTS Input over ASI and over IP according to RFC 3550 TS 102 034, clause 7.1.1. FEC management Modulated ISDB-Tb RF signal Input in rebroadcasting mode SMPTE 2022-1 (Pro MPEG CoP 3). Emergency flag management (detection and insertion) IGMPv2/v3 support. Test Modes: MFN and SFN operations. - CW insertion Internal GPS / Glonass receiver. - Null packet insertion, separated for each Layer Internal clock: Oven Controlled OCXO oscillator (10 MHz and 1 Remux capabilities (optional): PPS). - BTS generation from input TS/BTS - Up to 2 input sources to build each Transmission Layer Output clock: 1 PPS and 10 MHz. - PID filtering and remapping Bit rate adaptation plus PCR re-stamping. - Internal Carousel Editing, Store and Playing RF main and monitoring outputs (Spectrum, MER, Constellation). - IIP (including SFN information) insertion Test Modes: - BTS Compressor /De-Compressor Embedded - CW insertion - Null packet insertion Linear and non-linear Adaptive digital pre-correction circuits, when operated as transmitter. Main Features ATSC Version Linear and non-linear digital pre-correction circuits, when operated Compliant to ATSC A/53 and A/65 standard as repeater. Compliant to A/153 ATSC-MH standard Embedded HTTP server SMPTE310, RF, SSI Input: Management: Embedded SNMP v3 server - Embedded Web server. - Support 4 ASI input GbE Ports: GbE 1: 10/100/1000 Base T Management port. - Support 4 SSI input Redundancy: Input autoswitch algorithm supported. - Support 2 ASI output Security: Authentication for GUI access supported. - Support 2 MPEG over IP input/output channels on GBE port 2-3 Enable/Disable of cable equalizer bypass on input ASI ports One RF input to operate in rebroadcasting mode. Support the Editing of Virtual Channel Table in Translator mode Main Features DVB-T/T2 Version Supports a measure board for the monitoring of the modulated signal: SNR, BER, SER e LOCK Signal modulation compliant with: Amber switching implemented as a search for valid input when the - ETSI EN 300 744 v16.1 priority one is not locked. - ETSI EN-302 755 (DVB-T2) standard 1.4.1 - ETSI TS 101 191 v1.4.1 (SFN) Test modes: CW, Force Null Packets and PRBS T2-MI compliant with ETSI EN-102 773 V1.4.1 (T2-MI) standard Redundancy: Input auto-switch algorithm supported T2-MI input over IP or ASI Option A/110b compliant for SFN transmission ETR290 and T2-MI alarms Option: A/110b compliant for STL with ATSC-MH transmission Full Single-PLP compatibility (including MISO and PAPR reduction) Capable to transmit MPLP, Up to 16 PLP Bit rate adaptation plus PCR restamping in S-PLP Modulated DVB-T2 RF signal input (VHF/UHF) – when operating as repeater. 6 ARK-X 7 8 ARK-X ARK-X Configurations 1. Transmitter Only Version 2. Transmitter with Satellite Receiver Main Common Features DVB-S2 Input Configuration - Satellite Input Specifications ASI MPEG-2 TS seamless input. MPEG-2 TS over IP TS 102 034 V1.5.2 (2014-04) seamless Input. N. SAT Inputs: 1 MPEG-2 TS encapsulated in RTP (Real-time Transport Protocol Connector type: F Female according to RFC 3550 TS 102 034, clause 7.1.1. FEC management Input impedance: 75 ohm SMPTE 2022-1 (Pro MPEG CoP 3). Input level: -81 dBm up to -17 dBm IGMPv2/v3 support. Supported symbol rates: 1 to 45 Msymb/s (DVB-S) / 1 to 67.5 MFN and SFN operations. (DVB-S2 depending on modulation scheme). Internal GPS / Glonass receiver. DiSEqC: 2.0 Internal clock: Oven Controlled OCXO oscillator (10 MHz and 1 TS interface: broadcast reception and ISI filtering supported. PPS). Supported standards: ETSI EN 302 307 V1.1.1 (DVB-S2) Output clock: 1 PPS and 10 MHz. Bit rate adaptation plus PCR re-stamping. 3. Transmitter with Satellite Receiver with DEC RF main and monitoring outputs (Spectrum, MER, Constellation). Test Modes: DVB-S2 Input and CAM Configuration - - CW insertion - Null packet insertion Satellite and CAM Specifications Linear and non-linear Adaptive digital pre-correction circuits, when N. SAT Inputs: 1 operated as transmitter. Connector type: F Female Linear and non-linear digital pre-correction circuits, when operated Input impedance: 75 ohm as repeater. Input level: -81 dBm up to -17 dBm Embedded HTTP server Supported symbol rates: 1 to 45 Msymb/s (DVB-S) / 1 to 67.5 Management: Embedded SNMP v3 server - Embedded Web server. DVB-S2 depending on modulation scheme). GbE Ports: GbE 1: 10/100/1000 Base T Management port. DiSEqC: 2.0 Redundancy: Input autoswitch algorithm supported. TS interface: broadcast reception and ISI filtering supported. Security: Authentication for GUI access supported. Common Interface: N° card slots: 1 - Type: PCMCIA Supported standards: ETSI EN 302 307 V1.1.1 (DVB-S2) 9 4. Transposer and Re-Transmitter (Regenerative) 5. Transmitter with Analog A/V Inputs Transposer and Re-Transmitter (Regenerative) Digitizer with Analog A/V Inputs Configuration - Terrestrial RF IN Specifications Inputs: 4 SDI, 2 CVBS and 2 L/R N. RF Inputs: 1 Supported Composite Standards: NTSC CVBS, PAL (B, D, G, H, I, Connector type: N Female M, N) CVBS Input impedance: 50 ohm Supported SDI Standard: SMPTE 259M-C – Component 4:2:2, 270Mb/s for 525 and 625 lines, 13.5 MHz sampling, 4x3 and 16x9 Input level: -81 dBm up to -17 dBm aspect ratios. Supported standards: DVB-T/H, DVB-T2, ATSC, ISDB-T Outputs: 1 RF, 1 RF Monitor - 2 SDI for inputs bypass Test modes: CW, CW AV, Mute Audio Carrier, Mute Audio, Audio Test Tone, Video In, SMPTE Bars, Horizontal Bars, Red Field, ITS0, ITS1, ITS2, ITS3 , ITS4. Front End Option A/V Inputs Specifications: Analog Video input: Digitizer with Analog A/V Inputs Configuration - N°Inputs: 2 CVBS SAT without CAM receiver - Connector type: BNC SAT with CAM receiver - Input impedance: 75 ohm T2/ ATSC/ ISDB- Tb Receiver for Transposer, Re-Transmitter, Gap - Supported video standards: PAL B,D,G,H,I,M,N, NTSC Filler Analog Audio input - N°Inputs: 2 L/R couples - Connector type: XLR3 (Cannon f) - Input impedance: 600 Ohm balanced - Input Level: +6dBm +/- 6 dB ARK-X Series Shoulders (@ Fo ± 3.5 MHz ATSC) or (@ Fo ± 4.3 MHz DVB) or (@ Fo Output Working Output DVB ISDB-T DTMB ATSC MER ± 3.3 MHz Models Band Class Dimensions Connector Cooling W rms W rms W rms W rms ATV ps dB ISDB-T) ARK-X 000/U UHF A 1 RU N Air 1mw 1mw 1mW 1mw 1mW > 40 -39 ARK-X 000/V VHF (I) A 1 RU N Air 1mw 1mw 1mW 1mw 1mW > 40 -39 ARK-X 000/I VHF (III) A 1 RU N Air 1mw 1mw 1mW 1mw 1mW > 40 -39 ARK-X 050/U UHF A 1 RU N Air 5 5 5 6 10 > 40 -39 ARK-X 050/V VHF (I) A 1 RU N Air 5 5 5 6 10 > 40 -39 ARK-X 050/I VHF (III) A 1 RU N Air 5 5 5 6 10 > 40 -39 Specifications and characteristics are subject to change without notice. 10 ARK-X ARK-X CONFIGURATIONS ARK-X Configurations Standard Front-End ATV DVB-T/H DVB-T2 ISDBT ATSC DTMB None Transmitter Transmitter Transmitter Transmitter Transmitter Transmitter Transmitter Digitalizer A/V Input Transmitter with A/V Transmitter with A/V Transmitter with A/V Transmitter with A/V Transmitter with A/V with A/V analog option analog inputs (*) analog inputs (*) analog inputs (*) analog inputs (*) analog