indian Journal of Chemistry Vol. 36B, March 1997, pp. 246-251 Alkylation of aromatic substrates with methanol on heteropolyoxometalate K Johnson, B Viswanathan* & T K Varadarajan Department of Chemistry, Indian Institute of Technology, Madras 600 036, India Received 5 December 1995; revised and accepted 7 October 1996 The alkylation of aromatic substrates with methanol has been studied on potassium substituted salts of 12-phosphotungstic acid. Substitution at ring positions appears to be the predominant route. Among the potassium substituted salts, the salt containing K2.5 is the most active probably because of higher strength of Bronsted acid sites on this system. Mechanistic details of this reaction are dis- cussed. The studies on the catalytic alkylation of aromatic the parent acid. The resulting mixture was evapo- hydrocarbons are related to the elucidation of rated to dryness on a water-bath and then dried mechanistic aspects and to the use of this reaction overnight at 373 K in a hot air oven. The parent as a probe for establishing shape selectivity'<. acid supported on silica gel (80-100 mesh, surface Though majority of the published results deal area 440 m2jg) was prepared by wet impregna- with the mechanism of the process on zeolites"!", tion method. All the catalysts were characterised still details are not completely understood. It is by IR, TGA, DSC, XRD methods. All the organic generally considered that acidic sites are responsi- reagents employed were of high purity and were ble for the alkylation at the benzene ring? and used as such. Xylenes and toluene (99%) of BDH side chain alkylation occurs on basic sites':". A grade and triinethylbenzene (99%) and tetrame- number of studies'":" have dealt with shape selec- thylbenzene (99%) of Fluka grade were used. tive aspects of the alkylation process. Okuhara Catalytic reactions were carried out in a fixed and coworkers 15 have studied the alkylation of bed reactor working at atmospheric pressure. Vat- toluene on phosphotungstic acid and its sodium salt. Nishi and coworkers 16 studied alkylation of ious quantities and concentrations of two com~o- nent solutions of aromatics and methanol were in- toluene on the ammonium salt of phosphotungstic and silicontungstic acids and have shown the op- jected into the preheating zone at various con- eration of shape selectivity. trolled flow rates using a syringe infusion pump (Electronic Engineering Corporation, India). the The present paper deals with the studies on the alkylation of toluene and other polyalkylbenzenes reactant mixture was vaporised at the preheating as well as the dealkylation of different polyalkyl- zone before entering the reactor (20 mm internal benzenes on potassium salt of phosphotungstic diameter and 30 cm length). The catalyst was kept in the reactor supported with the help of acid (KxH3-xPWJ2040)'The scope of present inves- tigation includes study of the mechanistic aspects quartz wool. The temperature of the catalyst bed of toluene alkylation and also evaluation of pro- was maintained using a thyeistor based tempera- duct selectivity, especially selectivity of p-xylene ture controller (Indian Furnaces, India) and was as a function of x in K)I3_~WI20 40' measured using a thermocouple placed at the cen- tre of the catalyst bed. Materials and Methods The products were collected in a cold trap 12-Tungstophosphoric acid (H3PWJ2040) and maintained at ice temperature and identified by 12-tungstosilicic acid (H4SiW12040) were pre- GC-MS (Shimadzu, QPlOOO EX). Quantitative pared by the procedure reported in literature 17. analysis of the liquid products was carried out us:' KxH3-xPW12040(Kx) was prepared by the addition ing Gas Chromatography (Chemito, Toshniwal, of a solution containing stoichiometric amount of India) with SE30 column (1/8 in. dia, 3 metres potassium carbonate to an aqueous solution of length). In all the experiments, the catalysts used JOHNSON et al.: ALKYLATION OF AROMATIC SUBSTRATES WI1H METHANOL 247 ;: 30r---------~-__,120 ~ GI N- O E S e 80 20 80 ~ :s o . iii... GI -GI GI U > 0 C o o E u 10 -:; 60 40 on >- -> U II GI 40 2 3 on x in KxH3-x PW12040 Fig. I-Alkylation of toluene on KxH3.xPW12040 20 [Temperature; 473 K, methanol: toluenel 1: 1, WIF= 51.8 g hr/mole]; (0 conversion of toluene, x surface area of the ca- talyst) 0 0 1 2 3 were pretreated in nitrogen atmosphere at 650 K x in KxH3-xPW12040 for 4 hr. Fig. 2-Produc.t selectivity in alkylation of toluene on K.H3-xPW12040 [Temperature; 473 K, methanol: toluene; 1: 1, Results and Discussion W/F=51.8 g hr/mole]; (0 xylene, • trimethylbenzene, II te- The major products obtained from the alkyla- tramethylbenzene, 0 benzene) tion of toluene were xylenes and tri- and tetra- methylbenzenes. Small amounts of benzene and pentamethylbenzene are also formed at higher Table I-Selectivity of xylene isomers in the alkylation of temperatures. The variation of catalytic activity toluene [toluene: methanol; 1: 1, WIF; 51.8 g hr/mole, Tem- and surface area of K)I3-xPW12040 as a function perature; 473 K] of x is shown in Fig. 1. Conversion of toluene Catalyst Conversion Selectivity of shows_a maximum when x = 2.5. The surface area (mole%) xylene isomers (%) of the system increases as potassium contentIn- creases. These results are consistent with the ear- p m 0 lier reports" on the alkylation of 1,3,5-trimethyl- K1.5H1.5PW12040 2.2 39.2 39.2 21.5 benzene with cyclohexene on CS2.5 salt. It has K2HPWl2040 6.6 51.5 3U.4 rs.o been reported that'? CS2.5 shows pronounced ca- talytic activity especially for the surface type reac- K2.5Ho.5PWl2040 26.9 54.3 31.2 14.5 tions. For Cs salts, the catalytic activity correlates K3PWl2040 21.4 33,0 14.6 52.4 linearly with the surface acidity?". The fact that 20 HPTNSi02 7.8 30.1 21.8 48.0 the conversion of toluene shows a maximum at 20 HSTNSi02 7.6 31.5 20.6 47.9 x = 2.5 as in the case of CS2.5, suggests that the Equilibrium com- 24.1 54.8 21.2 surface acidity of K;I3-~W12040 reaches maxi- position' at mum when x = 2.5 and conversion of toluene 500K correlates linearly with thesurface acidity of the catalyst. The change in product selectivity with increas- lectivity of xylene isomers as a function of x in ing potassium content is shown in Fig. 2. The se- K)I3-~W120 40 are given in Table I. It is observed lectivity of xylene decreases as the potassium con- that for all compositions the selectivity for P: tent increases and passes through a minimum at xylene is higher than the equilibrium values1• As x = 2.5. Selectivity of trimethylbenzene increases the potassium content increases the selectivity of with increasing potassium content and shows a [rxylene increases and shows a maximum at maximum at x = 2.5. Selectivity of tetramethylben- x = 2.5. It has to be noted that there is no direct zene increases steadily at x > 2. The selectivity of correlation between conversion of toluene and benzene remains almost constant throughout the para selectivity. This is in contrast to the results composition range. It is of interest to comment on obtained with shape selective ZSM-5 type zeo- the selectivity pattern of the xylene isomers lites". Yashima and coworkers= have reported formed during toluene alkylation. The data on se- that, in the case of Y zeolite, [rxylene formation 248 INDIAN J. CHEM. SEC B, MARCH 1997 is a function of Bronsted acidity. However, Nishi et aL16have reported that shape selectivity may be 100 100 the reason in the case of (NH4hPW!2040 and (NH4)4SiW12040' The results obtained in this ;! 80 80 . study suggest that the high surface Bronsted acid- ~ •. 0 (; ity is responsible for the high para selectivity. If ! ! ,.. c: microporosity was responsible for para selectivity, 0 60 60 then the K3 salt should have shown maximum pa- -> .• u .. > ra selectivity. Nishi et aL16 reported that the •. c ~ 0 •• u strong acid sites with H, = - 5.6 play an import- '" 40 4·0 ant role in the- alkylation of toluene. Okuhara et al.18 estimated the amount of acid sites on the surface of H3PW12040 to be 8-16 ,umoles/g. The 20 20 quantities of acid sites (with H, = - 5.6) on K2, K2.5 and K3 salts were found to be 107, 135 and 59 ,umoles/g respectively by n-butylamine titra- .tion. The fact that K2.5 salt shows maximum para Reaction temperature (K I selectivity suggests that Bronsted acidity is re- Fig. 3-Effect of reaction temperature on the conversion and sponsible for para selectivity. This argument is the selectivity in toluene alkylation on K3PWI2040 [metha- further supported by the fact that 20% nol: toluene; 1: 1, W/F=76.4 g.hr/mole]; (0 xylene, 2 • trimethylbenzene, x toluene, ll. tetramethylbenzene, H3PW12040/Si02 (surface area 310 m /g) and o benzene) 20% H4SiW1204o/Si02 (surface area 306 m2/g) show high ortho selectivity (Table I) due to low acid site density obtained by high dispersion of conversion and product selectivity at various tem- acid sites on the high surface area silica. peratures are given in Table II. Conversion of tol- The adsorption centres in heteropolyoxometa- uene increases with the increase in contact time. lates have been recognised as Bronsted acid Selectivity of xylene decreases with increasing sites 15,19,21.Adsorbed methanol and aromatic contact .time and passes through a minimum molecules can be normally found predominantly whereas the selectivities of both tri- and tetra- around these sites. The extent of interaction de- methylbenzenes increases with the increase in pends on the acid strength and density of the sites contact time and pass through a maximum.