FOR PRODUCT DETAILS AND COMPLETE SELECTIONS MATERIALS SCIENCE www.tedpella.com Accessories, Supplies, Equipment and Tools Sectioning Mounting/Embedding Grinding Fine Grinding/Lapping Polishing Precision Thinning for SEM/TEM Optical Microscopy & Analysis Electron Microscopy Supplies ©Ted Pella, Inc. 10-7-2019, Printed in U.S.A. TED PELLA, INC. Microscopy Products for Science and Industry www.tedpella.com [email protected] 800.237.3526 PRECISION SECTIONING SAW & WAFERING BLADES PELCO® PREMIUM WAFERING BLADES PELCO® Diamond Wafering Blades 812-328 3 x .006 x 1/2" Hole, Fine Grit/ High Concentration ...........................................................each 812-329 3 x .006 x 1/2" Hole, Medium Grit/ High Concentration ............................................................each 812-330 3 x .006 x 1/2" Hole, Medium Grit/ low concentration ...............................................................each 812-331 3 x .010 x 1/2" Hole, Medium Grit/ High Concentration ............................................................each 812-332 4 x .012 x 1/2" Hole, Fine Grit/ High Concentration ............................................................each 812-333 4 x .012 x 1/2" Hole, Medium Grit/ High Concentration ............................................................each PELCO® PRECISION LOW SPEED SAW 812-334 4 x .012 x 1/2" Hole, coarse grit/ The PELCO® Precision Low Speed Saw is a compact, multipurpose, High Concentration ............................................................each precision saw designed to cut a wide variety of materials with mini- 812-335 4 x .012 x 1/2" Hole, coarse grit/ mal subsurface damage. Its low speed makes it possible to cut fragile low concentration ...............................................................each materials that would otherwise fracture as well as soft materials that would load the diamond wheel on a higher speed saw. A variety of 812-336 4 x .015 x 1/2" Hole, Fine Grit/ sample holders are available, providing a means for mounting any High Concentration ............................................................each shape of sample, while multi-axis goniometer adaptability simplifies 812-337 4 x .015 x 1/2" Hole, Medium Grit/ cutting oriented crystals. High Concentration ............................................................each 812-338 4 x .015 x 1/2" Hole, coarse grit/ 75000 PELCO® Precision Low Speed Saw ................................each High Concentration ............................................................each 54585 500W Step Up / Step Down Voltage Transformer ........each 812-339 4 x .020 x 1/2" Hole, Fine Grit/ PELCO® PRECISION LOW SPEED SAW ACCESSORIES High Concentration ............................................................each 812-340 4 x .020 x 1/2" Hole, Medium Grit/ 75001 Single Axis Goniometer .....................................................each High Concentration ............................................................each The Single-Axis Goniometer has a graduated scale with a 0.2° vernier 812-341 4 x .020 x 1/2" Hole, coarse grit/ and can berotated 360°. This rotational capability makes it ideal for High Concentration ............................................................each precisely slicing single crystals. The sample is mounted to a block 812-342 5 x .015 x 1/2" Hole, Medium Grit/ using a low melting point wax and the block is subsequently clamped nto the PELCO® Precision Low Speed Saw. Wax mounting of the High Concentration ............................................................each sample ensures that the cut piece will remain attached to the holder 812-343 5 x .015 x 1/2" Hole, coarse grit/ and will not be damaged due to falling after being cut. High Concentration ............................................................each 75003 Double Clamp Sample Holder ..........................................each 812-344 5 x .015 x 1/2" Hole, coarse grit/ low concentration ...............................................................each The Double Clamp Sample Holder is designed to clamp both ends of a 812-345 6 x .020 x 1/2" Hole, coarse grit/ round or rectangular rod while cutting between the two clamped posi- tions.The Double Clamp Sample Holder can also be used as a single High Concentration ............................................................each clamp holder to hold encapsulated metallurgical samples up to 1.25" 812-346 6 x .020 x 1/2" Hole, coarse grit/ in diameter. low concentration ...............................................................each 75004 Petrographic Vacuum Sample Holder ..............................each 812-347 7 x .020 x 1/2" Hole, Medium Grit/ High Concentration ............................................................each The Petrographic Vacuum Sample Holder is designed to use a vacuum 812-348 7 x .020 x 1/2" Hole, coarse grit/ to hold a 2.5 x 5.0cm (1 x 2") glass slide, onto which petrographic or other samples are mounted, while making saw cuts parallel to the High Concentration ............................................................each glass slide. The glass slide is held against a stainless steel support 812-349 7 x .029 x 1/2" Hole, coarse grit/ plate with vacuum and is placed firmly against three locating pins to High Concentration ............................................................each maintain its position. PELCO® cBN Wafering Blades 75005 2-Axis Goniometer .............................................................each 812-355 3 x .006 x 1/2" Hole, Medium Grit/ The 2-Axis Goniometer is used for orienting and cutting single High Concentration ............................................................each crystals. With the sample mounted to the goniometer, the vertical axis 812-356 4 x .012 x 1/2" Hole, coarse grit/ can be rotated +/- 50° fromthe 0.2° vernier on the arm. High Concentration ............................................................each 75006 Vise Sample Holder ............................................................each 812-357 4 x .012 x 1/2" Hole, coarse grit/ The Vise is designed to hold flat, round and irregularly shaped sam- low concentration ...............................................................each ples without the need for mounting wax. The entire vise can rotate 812-358 5 x .015 x 1/2" Hole, coarse grit/ 360° in the horizontal plane. An extended v-notch jaw enables the low concentration ...............................................................each mounting of cylindrical samples up to 1.25" in diameter including en- 812-359 6 x .020 x 1/2" Hole, coarse grit/ capsulated metallurgical samples. low concentration ...............................................................each 75019 The Bone Chuck ..................................................................each 812-360 7 x .025 x 1/2" Hole, coarse grit/ The ‘bone chuck’ allows you to hold the sample utilizing a series of ten low concentration ...............................................................each independently adjustable mounting screws. These mounting screws PELCO® Abrasive Blades make it possible to hold irregularly shaped specimens and rotate them 812-361 3 x 0.10 x 1/2" Hole, Medium Grit .....................................each 360° in a horizontal plane. The Bone Chuck attaches to the standard 812-362 4 x 0.15 x 1/2" Hole, Medium Grit .....................................each work arm in place of the standard sample holders. 812-363 4 x 0.15 x 1/2" hole, coarse grit .........................................each 2 www.tedpella.com TED PELLA, INC. 800-237-3526 SAMPLE MOUNTING ADHESIVES & SUPPLIES Crystalbond™ Mounting Adhesives; PELCO® Pro Cyanoacrylate; Fine Conductive Powders; Engraver Tools PELCO® PRO CYANOACRYLATE SUPER GLUES PELCO® Pro cyanoacrylate based instant or super glues are ideal for repair, sample preparation, as- sembly and bonding dissimilar materials. Clear, fast curing cyanoacrylate without mixing or ad- CRYSTALBOND™ MOUNTING ADHESIVES ditional heat applied. Wash away adhesives are ideal for temporary mounting of Available in sets of small tubes with 5x2g, 20ml products that require dicing, polishing and other machining bottle with dispenser tip or 20g dispenser tube. processes. They exhibit high bond strength and adhere readily A large range of different viscosities and curing to metals, glass and ceramics by melting with heat. When pro- times are offered. cessing is complete, the adhesives are removed by reheating and cleaning with environmentally friendly cleaning agents. 14460 PELCO® Pro C100 Cyanoacrylate Glue, 5x2g .................each 14470 PELCO® Pro C100 Cyanoacrylate Glue, 20ml .................each Typical applications include: 14462 PELCO® Pro F5 Cyanoacrylate Glue, 5x2g ......................each ■ Machining advanced ceramics 14464 PELCO® Pro C5 Cyanoacrylate Glue, 5x2g .....................each Lapping and polishing optical components ■ 14474 PELCO® Pro C5 Cyanoacrylate Glue, 20ml .....................each Dicing ceramic substrates and semiconductor wafers ■ 14465 PELCO® Pro C300 Cyanoacrylate Glue, 5x2g .................each ■ Dicing ferrites, glasses and piezoelectrics 14477 PELCO® Pro C1000 Cyanoacrylate Glue, 20ml ...............each ■ Dicing metal and optical single crystals 14478 PELCO® Pro CA-Gel Cyanoacrylate Glue, 20g Tube ......each ■ Mounting cross-sections for electron microscopy ■ Backfilling components for temporary mechanical support PELCO® FINE CONDUCTIVE POWDERS Crystalbond™ 509 SIlver, Carbon and Nickel Powders Provides excellent adhesion and minimizes clogging