FILTER FLOC Polymeric Filtration Flocculant

FILTER FLOC Polymeric Filtration Flocculant

FILTER FLOC Polymeric filtration flocculant APPLICATIONS The M-I SWACO FILTER FLOC* polymeric filtration flocculant is designed to flocculate residual ■ Freshwater, seawater, monovalent, displacement solids, enabling solids to be removed from brine-based completion fluids. By flocculating and calcium brine fluids the residual displacement of solids, the contaminant can be easily transported to the surface and ■ Solids removal from brine-base removed through the brine filtration process. For completion fluid applications, the flocculant, applied completion fluids as a spacer in the displacement train, is prepared by adding 55 galUS [208 L] of the flocculant polymer to 100 bbl [15.9 m3] of the brine base. This flocculant is intended for use in freshwater, seawater, ■ Completion fluid brine reclamation monovalent, and calcium brine fluids; however, the effectiveness is reduced in zinc-containing brines. BENEFITS For reclamation applications, optimum flocculant additions are determined through pilot testing. ■ Reduces displacement waste Toxicity and Handling and filtration time Handle the flocculant as an industrial chemical, wear protective equipment, and observe the precautions ■ Expedites completion fluid described in the material safety data sheet. Bioassay information is available upon request. cleaning process ■ Transports to surface and removes Packaging and Storage contaminants efficiently The flocculant is packaged in 55-galUS [208-L] drums and should be stored in a dry, well-ventilated area. The container must be kept closed and away from heat, sparks, flames, or any other incompatibles. Safe ■ Flocculates residual displacement solids warehousing practices should be followed regarding palletizing, banding, shrink wrapping, and stacking. ■ Eliminates separation from fluid when agitation ceases Typical Physical Properties Physical appearance Viscous clear liquid FEATURES Relative density 1.011 ■ No contribution to oil and grease values pH 7.4 ■ 100% soluble Flash point >200 degF [93 degC] ■ No sheen * Mark of M-I L.L.C., a Schlumberger company Copyright © 2016 M-I L.L.C. All rights reserved. 16-MI-207417 miswaco.com.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    1 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us