Avago Technologies Fiber-Optic Solutions 10-Gbps XFP Transceivers Avago Advantages As a leading innovator and provider of fi ber-optic transceivers, Avago has developed a family of 1310-nm, 10- • Pioneer in laser, optics, and Gbps XFP transceivers to enable connectivity in enterprise wiring closet, data center and service provider applica- sensor technology tions. Based on the XFP multi-source agreement standard for serial fi ber-optic transceivers, the XFP transceiver • World-class design and modules are especially attractive to the SONET OC-192 SR-1 market which has moved away from a 300-pin trans- manufacturing for very ceiver footprint and towards 30-pin XFP-based line cards. In this market, higher density line cards, greater system high quality and high fl exibility through pluggability and a lower cost of sparing are desirable. XFP is key to enabling these features. volume • Worldwide sales and Extensive use of Gigabit Ethernet (GbE) to the desktop in corporate Local-Area-Networks (LANs), plus attractive applications pricing of 10-GbE ports on Ethernet switches, is driving increased interest in the 10-GbE market. The Avago XFP • Leading provider of fi ber- transceivers are helping to drive this interest through support of OC-192, 10 GbE and 10 GFC. Initial deployments optic transceivers of 10 GbE consist of 10GBASE-LR 10-km links over single-mode fi ber, between corporate campuses over leased fi ber, or between a large corporate site and the local telephone exchange. The Avago XFP transceiver modules are targeted at 10-km links of 10 GFC, connecting Fortune 1000 data centers to nearby backup sites. Avago Technologies 10-Gbps XFP Transceivers The 10-Gbps XFP pluggable transceiver modules ——————————————————————————————————— Compliant to XFP MSA Rev 4.0 Enables high-density, fl exible high-speed optical interfaces for are compliant to rev. 4.0 of the XFP Multi-Source a variety of applications Agreement (MSA). They feature the XFI serial ——————————————————————————————————— interface along with superior thermal, EMI and Low-power dissipation and high Enables higher density applications margins to electromagnetic 3.3-V low power operation - enabling higher- emission limits density, lower-cost line cards than XAUI (10 GbE) ——————————————————————————————————— transceivers and 300-pin (OC-192) transponders. Guaranteed temperature Critical parameters are guaranteed over the performance operating temperature range and supply voltage of The Avago modules are designed for single- 3.15 to 3.45 V mode fi ber and operate at a nominal wavelength ——————————————————————————————————— of 1310 nm. Enhanced high-speed design Margin to key optical performance parameters for SONET and 10-GbE link requirements ——————————————————————————————————— Digital diagnostic information Enables real-time system monitoring and faster Enabling higher performance network available through I2C interface restoration solutions ——————————————————————————————————— Applications • Service provider connectivity Key Features • Enterprise wiring closet links • XFP MSA compliant • Campus-campus enterprise links • Uncooled 1310-nm DFB Laser and PIN Photo diode • Data-center and back-up site connectivity • XFI 10G-compliant serial electrical interface • Compliant to IEEE 802.3ae, 10GBASE-LR for 10GbE, 10.3125 Gbps, and OC-192 SR-1 • Compliant to 10 GFC, 1310-nm Serial PMD, type 1200-SM-LL-L, 10.51875 Gbps • 1.3-W (nominal) power consumption • LC duplex optical connector interface con forming to ANSI TIA/EIA604-10 (FOCIS 10) • Link lengths up to 10 km with 9-µm fi ber • -5 to +70 °C case operating temperature range • Hardware pins available for XFP control signals • IEC 60825-1 Class 1/CDRH Class 1 laser eye safety To fi nd out more, please visit www.avagotech.com Data subject to change Copyright © 2005 Avago Technologies, Pte. December 9, 2005 5989-4527EN.