distributed by: FUNCTIONAL PRODUCTS INC. Request Quote or Samples Innovative Chemistry for Lubricants Industrial Packages Viscosity Modifiers ...................................................... 3 Liquid Polyisobutylene Viscosity Modifiers ..................................4 Cold Flow Improvers .....................................................4 Water Based Products....................................................4 Rust and Oxidation Inhibitor Additive Package .............................. 5 Additive for Biobased Hydraulic Fluid ...................................... 5 Industrial Gear Oil Additive Packages....................................... 5 Slide Way Additive Packages ..............................................6 Sulfur-free Slide Way Additive Package .....................................6 Evaluating the Coolant Compatibility of Way Lubricants ...................... 7 Additives for Mist Inhibition and Worker Safety ............................. 7 QMS Certified to ISO 9001:2015 (With Design) REACH and GHS Compliant 8282 Bavaria Road | Macedonia, Ohio 44056 | 330-963-3060 | functionalproducts.com | March 2018 FUNCTIONAL Industrial Packages PRODUCTS INC. Functional Products Inc. was FUNCTIONAL PRODUCTS INC. Definitions founded in 1985. The Quality Industrial Packages are fully Extreme Pressure Property — (EP) Management System is certified formulated concentrates that are The ability of a lubricant to reduce to ISO 9001:2008 (with design). added to a base oil at performance- scuffing, scoring and the seizure of Functional Products is committed specific amounts to create a finished contacting surfaces when applied to compliance with current fluid, hydraulic, gear or way oil, that loads are high REACH and CLP regulations, meets all industry standards for the including the Globally Harmonized type of fluid. Lubricity — The reduction of friction System (GHS) for classification and labeling standard. or wear between two load-bearing FUNCTIONAL PRODUCTS INC. offers surfaces, in relative motion, by the Functional Products is an active industrial packages for mineral addition of a lubricant member or participant in the and vegetable oil to make finished following pro- fessional technical hydraulic fluids, gear oils and way Demulsibility — The tendency of associations: NLGI, ELGI, NLGI oils. This catalog presents physical an oil to resist emulsification in the India, STLE, KSTLE, AOCS, NSF, data on these packages and the sump. UEIL and ILMA. standards met by the finished fluids. Detailed performance data is R&O Package — Provides protection Functional Products formulates available upon request. against rust and oxidation within the and blends over 200 active products hydraulic system pump. Primarily for and also provides custom formulary Noteworth piston pumps. capa-bility for short and long- FUNCTIONAL PRODUCTS was given run needs. the “Best Paper Award” at the ELGI AW Package — Provides protection Headquarters, general offices and Annual Meeting in Paris for their against wear, rust and oxidation manufacturing plant are located paper on polymer compatibility in within the hydraulic system pump. in Macedonia, Ohio. Sales offices mineral and vegetable oils. Also, contains anti-foam agents. and stocking points are located Primarily for vane pumps. throughout the United States and FUNCTIONAL PRODUCTS received an Canada, as well as Latin America, award for its paper at the National PSSI — The Shear Stability Europe, Australia, India and Asia. Lubricating Grease Symposium in Index value as determined by a Wuyishan, China. mechanical shear test. The PSSI is Mission Statement: used to evaluate the shear stress FUNCTIONAL PRODUCTS performance of polymers in real Functional Products Inc. is contributed to TLT’s article on applications. Unless otherwise noted, committed to providing our Viscosity Modifiers and Additives customers with quality products the PSSI herein is based on ASTM and services that meet or exceed for Grease. D6278. their expectations through the use of continuous improvement. FUNCTIONAL PRODUCTS has authored technical papers and written book chapters (Leslie Health and Safety: Rudnick’s Lubricant Additives chapter The product descriptions here, in on tackifiers) Technical Data Sheets (TDSs) and on product labels are not intended to take the place of a Safety Data Sheet (SDS). An SDS is provided with each order or sample shipment and can be downloaded from our website: distributed by: www. functionalproducts. com Phone: 1-330-963-3060 Request Quote or Samples 2 Industrial Packages Viscosity Modifiers Our Viscosity Modifier packages are high molecular Solid viscosity modifiers are more convenient and weight polymers which change the temperature economical when large quantities of additives are dependence of a liquid lubricants’ viscosity. These required and the equipment necessary to granulate the polymeric additives reduce mineral oil thinning as solid form of the product is available. FUNCTIONAL temperature increases. Polymers used as viscosity V-100, V-101, and V-255 are OCP viscosity index improver modifiers in oil have three critical attributes: improved polymers in concentrated form. When dissolved in oil, viscosity index, enhanced thickening efficiency, and they are economical oil treatment additives. appropriate shear stability. The active thickeners in our viscosity modifiers are Liquid viscosity modifiers are used for ease of handling ethylene/propylene copolymers or proprietary polymers. when preparing industrial fluids and lubricants. FUNCTIONAL V-158, V-158F and V-160 may be used in Due to the viscosity of V-158 and V-158F, elevated preparing industrial fluids and lubricants. temperatures of 50-90°C (122-200°F) can facilitate handling. FUNCTIONAL V-460 is a clear and colorless NSF HX-1 approved (142396) shear-stable viscosity modifier that may be used in lubricants that may have incidental contact with food. Typical Properties Liquid Form Solid Form V-158 V-158F V-160 V-160F V-460 V-100 V-101 V-255 Appearance Clear White Bale White Bale Pellet 150ºC Flash Point (PMMC) 175ºC (350ºF) — — — (300ºF) Kinematic Viscosity 1,000 1,600 1,000 3,250 3,000 — — — cSt at 100ºC Thickening Efficiency 6 cSt 14 cSt 12 cSt 14.5 cSt 13 cSt 12 cSt 13 cSt 10 cSt in ISO 32 at 100ºC 10% 10% 10% 10% 10% 1% 1% 1% PSSI 45% 45% 22% 22% 22% 22% 45% 25% (ASTM D627B) Treatment Levels See Below 5 - 20% 0.5 - 2.0% 0.3 - 0.7% 0.5 - 2.0% Liquid Viscosity Modifier Percent Treat in ISO 32 Base Oil V-158 V-158F V-160 V-160F SAE 20 10 - 11 3 - 5 5 - 7 3 - 5 SAE 30/600N 9 - 11 8 - 10 10 - 11 8 - 9 SAE 40 12 - 14 11 - 13 12 - 14 9 - 11 distributed by: SAE 50 17 - 19 15 - 17 18 - 20 15 - 17 Bright Stock 150 25 - 27 23 - 25 22 - 24 19 - 21 Request Quote or Samples The treat rates are given as reference values only. Treat additives used in the final formulation. It is up to the user rates are heavily dependent on the base oil and other to determine the proper treat rate. Functional Products Inc. 3 Liquid Polyisobutylene Viscosity Modifiers FUNCTIONAL PRODUCTS offers low molecular weight polyisobutylene that perform similarly to polybutenes, Typical Properties but are more economical when preparing industrial fluids, PIB-350 PIB-510 lubricants and greases. FUNCTIONAL PIB-350 may be used as a replacement for polybutenes with a MW of 350. Color (ASTM D1500) <1.0 (Clear and Colorless) PIB-510 may be used to replace polybutenes with a MW of 510. Both products utilize a low MW polyisobutylene active Flash Point >150ºC 175ºC thickener that has a single, uniform polymer repeat unit as Kinematic Viscosity 25 - 40 cSt 190 - 220 cSt compared to the copolymer polybutenes. The diluent is a at 40ºC paraffinic mineral oil. PSSI (30 cycles) 4.0% 12.0% Cold Flow Improvers Cold flow improvers impede crystal formation in mineral FUNCTIONAL PD-600 and FUNCTIONAL PD-610 are and vegetable lubricants to improve performance at low wax-crystal modifiers used in mineral oils with temperatures. FUNCTIONAL PRODUCTS offers PD-555C applications in hydraulic fluids, gear oils, chain stays, for vegetable oils and esters and PD-600 and PD-610 for pneumatic tools and motor oils. The selection between mineral oils. PD-555C is effective under both rapid cooling PD-600 and PD-610 depends on the compatibility and extended storage for use in canola, rapeseed, soy- between the cold flow improver and specific chain bean oils and certain esters. A 0.5% treat rate typically structure of the base oil. A treat rate of 0.1% may reduce improves the cold flow properties by 10°C to 25°C. the base oil cold flow properties by 20°C. FUNCTIONAL PRODUCTS will test our cold flow improvers in your base oils and report the results to you. Typical Properties Vegetable Oil Mineral Oil PD-555C PD-600 PD-610 Appearance Light-colored Pale Yellow Lbs. per Gallon 7.75 7. 33 7.6 Flash Point 160ºC 135ºC 150ºC Kinematic Viscosity 300 cSt 70 cSt <800 cSt at 100ºC Treat Level 0.5% 0.1-0.2% 0.1-0.2% Water Based Products FUNCTIONAL AW-487 is an anti-wear and lubricity to increase adherence and drip resistance to a liquid or additive for use in lubricants containing a significant colloidal suspension used in aqueous bar and chain oils amount of water. AW-487 contains no phosphorus, or wire rope lubricants. It may also act as a binder for chlorine or heavy metals and can be used in environ- powders and an anti-sag agent in paints. Typical treat mentally sensitive applications. rates are 0.3% to 5%, depending on the application. FUNCTIONAL MW-612 is a low viscosity (3-8 cSt at 40°C) FUNCTIONAL CI-498 is a food-grade corrosion inhibitor anti-mist additive that greatly reduces the formation of composed of an aqueous solution of a phosphate salt coolant mist in metal working applications. for use in lubricants and hydraulic fluids that may have incidental food contact. Treat rates are generally 0.3% to FUNCTIONAL V-801 is an environmentally friendly, non- 0.5%, dependent on other components of the formulation. hazardous viscous liquid additive (40,000 cSt at 40°C) CI-498 may be used with antioxidants, thickeners or other that thickens and adds tack to fluids made from water additives commonly found in relevant applications.