Labeling systems PRODUCT APPROVALS INSTALLATION METHOD Rail vehicles Sleeve system Product approvals for rail vehicles from Mounting by sliding sleeve over product Siemens, Bombardier, Alstom, Talgo for local and long-distance travel and for Direct labeling system regional travel systems. Direct slide-in mounting Cable tie system with sleeves Mounting the sleeve with cable ties Automotive industry Product approvals for plants and machinery in the auto industry including at Audi, Cable tie system label Mounting the labels with cable ties BMW, Citroën Peugeot, Daimler AG, Fiat, Karmann, Opel, Renault, VW Clamping system Mounting the sleeve with a clamping base Public buildings and institutions Self-locking system Product approvals for media conducting Self-clamping base used to mount holder systems (electricity, air, water), supply, con- trol, networks, warning and signalling units Adhesive system Label glued into place Snap-fit system Label snapped into place Air, water, road transport Product approvals for Strip system Aircraft: media-conducting systems, electric, Strip snapped into place hydraulic Water craft: Electro, hydraulic, pneumatic Street vehicles: Bus, lorry, special vehicles Riveting system Label riveted into place Screw assembly system Mechanical engineering Mounting the label with screws LABELING TECHNOLOGY SPECIFICATIONS Temperature range Inscription with plotter Material Inscription with hand pen Fire classification UL 94 Inscription with Office laser printer Additional information Inscription via engraving Adhesive Inscription with matrix printer Inscription with Pulsar laser Inscription with thermal lamination system LABELING Inscription with inkjet printer Part is halogen free Pre-inscribed label Part is UV-resistant Heat-shrink tube labeling 1060 Contents LABELING SYSTEMS Single wire, cable and conduit labeling Page 1063 – 1122 Terminal block labeling Page 1123 – 1138 Device and device location labeling Page 1139 – 1172 Labeling of push-buttons and signal lamps Page 1173 – 1180 System labeling Page 1181 – 1184 Thermal transfer labels Page 1185 – 1198 Laser labeling materials Page 1199 – 1216 Monomatt MM Page 1217 – 1220 Labeling systems Page 1221 – 1274 • Laser systems and accessories Page 1221 – 1230 mp-LM 1 Page 1222 mp-LM 3 Page 1223 mp-LM 10 Page 1224 mp-LM Accessories and replacement parts Page 1225 – 1226 pulsar M6 Page 1227 pulsar A6 Page 1228 pulsar Accessories Page 1229 • Inkjet systems, accessories and supplies Page 1231 – 1236 p3b Page 1232 p3b Accessories and supplies Page 1233 – 1234 pictor2 Supplies Page 1235 • Plotter systems, engraving option, accessories and supplies Page 1237 – 1244 mp-PM Basic Page 1238 mp-PM A3 Page 1239 mp-EM opt. Page 1240 mp-PM Accessories, replacement parts and supplies Page 1241 – 1243 •Engraving systems, accessories, additives and engraving tools Page 1245 – 1260 MGS 50 / MGS 60 Page 1246 CAM 100 Page 1247 CAM 200 Page 1248 CAM Accessories, additives and engraving tools Page 1249 – 1259 • Thermal transfer systems, accessories and supplies Page 1261 – 1274 mp-TM EOS1 Page 1262 mp-TM SQUIX 4/M Page 1263 mp-TM XD4T Twin Page 1264 mp-TM Accessories and supplies Page 1265 – 1268 pavonis Page 1269 pavonis Accessories and supplies Page 1270 – 1273 Software Page 1275 – 1278 Accessories Page 1279 – 1284 Base plates Page 1280 Holder frame, metal tab, metal hook Page 1281 ACS special function tool Page 1282 S-hook Page 1283 APPENDIX Selection table combination options labels/base plates Page 1286 – 1287 Selection table combination options devices/base plates Page 1287 Material descriptions Page 1288 – 1290 Material properties Page 1291 Notes Page 1292 – 1297 Index of types Page 1298 Selection table single wire, cable, and conduit labelling Page 1300 – 1303 Allocation table Page 1304 – 1306 1061 1062 Single wire, cable, and conduit labeling 1063 LABEL SLEEVES KT label sleeve (standard sleeve) PRODUCT INFORMATION SPECIFICATIONS High-quality, fully transparent label sleeves • 7 sizes are available for wire cross for labeling wires, cables and conduits. The sections from 0.22 – 120 mm² (AWG -40.00 – 140 °F KT label sleeves hold the BK indents KS approx. 24 – 4/0). labels. • The sleeves come in different lengths. Polyvinyl chloride (PVC) V0 The special KT 2/20x9 or KT 2/35x9 sleeves are for multi-wire labeling hold our type KSO Standard label sleeve labels. Type Order No. Application range Wire cross section Recommended No. Pack from - to from - to label idents qty. Ø in (C) in² (D) plate BK23 / BK30 0.39 in (10 mm) sleeve length (A), single line inscription KT 0/10 86201010 0.05 – 0.08 0.01 – 0.02 KS 4/10 4 / 3 2000 KT 1/10 86201012 0.07 – 0.10 0.02 – 0.04 KS 4/10 4 / 3 2000 KT 2/10 86201014 0.10 – 0.16 0.03 – 0.10 KS 4/10 4 / 3 2000 KT 3/10 86201016 0.16 – 0.26 0.10 – 0.24 KS 4/10 4 / 3 1000 KT 4/10 86201018 0.24 – 0.39 0.39 – 0.98 KS 4/10 4 / 3 1000 KT 5/10 86201020 0.35 – 0.59 0.98 – 1.97 KS 4/10 4 / 3 1000 KT 6/10 86201022 0.59 – 0.91 1.97 – 4.72 KS 4/10 4 / 3 500 0.47 in (12 mm) sleeve length (A), single line inscription KT 0/12 86201210 0.05 – 0.08 0.01 – 0.02 KS 4/12 5 / 4 2000 KT 1/12 86201212 0.07 – 0.10 0.02 – 0.04 KS 4/12 5 / 4 2000 KT 2/12 86201214 0.10 – 0.16 0.03 – 0.10 KS 4/12 5 / 4 2000 KT 3/12 86201216 0.16 – 0.26 0.10 – 0.24 KS 4/12 5 / 4 1000 KT 4/12 86201218 0.24 – 0.39 0.39 – 0.98 KS 4/12 5 / 4 1000 KT 5/12 86201220 0.35 – 0.59 0.98 – 1.97 KS 4/12 5 / 4 1000 KT 6/12 86201222 0.59 – 0.91 1.97 – 4.72 KS 4/12 5 / 4 500 0.59 in (15 mm) sleeve length (A), single line inscription KT 0/15 86201510 0.05 – 0.08 0.01 – 0.02 KS 4/15 6 / 5 2000 KT 1/15 86201512 0.07 – 0.10 0.02 – 0.04 KS 4/15 6 / 5 2000 KT 2/15 86201514 0.10 – 0.16 0.03 – 0.10 KS 4/15 6 / 5 2000 KT 3/15 86201516 0.16 – 0.26 0.10 – 0.24 KS 4/15 6 / 5 1000 KT 4/15 86201518 0.24 – 0.39 0.39 – 0.98 KS 4/15 6 / 5 1000 KT 5/15 86201520 0.35 – 0.59 0.98 – 1.97 KS 4/15 6 / 5 1000 1064 LABEL SLEEVES KT label sleeve (standard sleeve) (Continued...) Type Order No. Application range Wire cross section Recommended No. Pack from - to from - to label idents qty. Ø in (C) in² (D) plate BK23 / BK30 KT 6/15 86201522 0.59 – 0.91 1.97 – 4.72 KS 4/15 6 / 5 500 0.71 in (18 mm) sleeve length (A), single line inscription KT 0/18 86201810 0.05 – 0.08 0.01 – 0.02 KS 4/18 7 / 6 2000 KT 1/18 86201812 0.07 – 0.10 0.02 – 0.04 KS 4/18 7 / 6 2000 KT 2/18 86201814 0.10 – 0.16 0.03 – 0.10 KS 4/18 7 / 6 2000 KT 3/18 86201816 0.16 – 0.26 0.10 – 0.24 KS 4/18 7 / 6 1000 KT 4/18 86201818 0.24 – 0.39 0.39 – 0.98 KS 4/18 7 / 6 1000 KT 5/18 86201820 0.35 – 0.59 0.98 – 1.97 KS 4/18 7 / 6 750 KT 6/18 86201822 0.59 – 0.91 1.97 – 4.72 KS 4/18 7 / 6 300 0.91 in (23 mm) sleeve length (A), single line inscription KT 0/23 86202310 0.05 – 0.08 0.01 – 0.02 KS 4/23 10 / 7 2000 KT 1/23 86202312 0.07 – 0.10 0.02 – 0.04 KS 4/23 10 / 7 2000 KT 2/23 86202314 0.10 – 0.16 0.03 – 0.10 KS 4/23 10 / 7 1000 KT 3/23 86202316 0.16 – 0.26 0.10 – 0.24 KS 4/23 10 / 7 1000 KT 4/23 86202318 0.24 – 0.39 0.39 – 0.98 KS 4/23 10 / 7 1000 KT 5/23 86202320 0.35 – 0.59 0.98 – 1.97 KS 4/23 10 / 7 500 KT 6/23 86202322 0.59 – 0.91 1.97 – 4.72 KS 4/23 10 / 7 250 1.18 in (30 mm) sleeve length (A), single line inscription KT 0/30 86203010 0.05 – 0.08 0.01 – 0.02 KS 4/30 13 / 10 1000 KT 1/30 86203012 0.07 – 0.10 0.02 – 0.04 KS 4/30 13 / 10 1500 KT 2/30 86203014 0.10 – 0.16 0.03 – 0.10 KS 4/30 13 / 10 1000 KT 3/30 86203016 0.16 – 0.26 0.10 – 0.24 KS 4/30 13 / 10 1000 KT 4/30 86203018 0.24 – 0.39 0.39 – 0.98 KS 4/30 13 / 10 500 KT 5/30 86203020 0.35 – 0.59 0.98 – 1.97 KS 4/30 13 / 10 500 KT 6/30 86203022 0.59 – 0.91 1.97 – 4.72 KS 4/30 13 / 10 200 0.79 in (20 mm) sleeve length (A), single and multi-line inscription KT 2/20x9 86202050 0.1 – 0.16 0.03 – 0.10 KSO 20x9 1000 1.38 in (35 mm) sleeve length (A), single and multi-line inscription KT 2/35x9 86203550 0.10 – 0.16 0.03 – 0.10 KSO 35x9 500 2.76 in (70 mm) sleeve length (A), single line inscription KT 2/70 86207014 0.10 – 0.16 0.03 – 0.10 KS 4/30-70 30 / 23 500 KT 3/70 86207016 0.16 – 0.26 0.10 – 0.24 KS 4/30-70 30 / 23 400 * Single wire, type H05/07V-K 1065 LABEL SLEEVES KTH label sleeve (halogen-free) PRODUCT INFORMATION SPECIFICATIONS High-quality, fully transparent, halogen-free • Wire cross sections from 0.01 – 1.38 in² label sleeves for labeling wires, cables and (0.22 – 35 mm²) (AWG approx.