DIAMOND CORE DRILLING DIAMOND CORE DRILLING CORE DIAMOND * Max. bevel width may require several passes, depending on material hardness 220 V / 50 Hz also available Catalog Wet/Dry Spindle Model Power input Load speed page drilling connection DRY CORE DRILLING 13.6 Amp/ 0-1,000/ EHD 2000 S 26 up to 6" dia. 5/8" x 11 UNC 110 Volt 0-2,000 rpm WET/DRY CORE DRILLING up to 4" dia. 5/8" x 11 UNC 15 Amp/ 0-800/ ETN 2001 P 28 1 ¼ " x 7 UNC 110 Volt 0-1,570 rpm up to 4" dia. up to 6 3/8" 0-510/ 5/8" x 11 UNC 19.5 Amp/ ETN 162/3 30 dia. 0-1,150/ 1 ¼ " x 7 UNC 110 Volt up to 8" dia. 0-2,500 rpm WET CORE DRILLING 5/32" to ¾ " M 12 x 6 Amp/ END 712 P 32 0-8,000 rpm dia. 1.5 male 110 Volt Quick-Lock ¼ " to 2 5/8" 13 Amp/ 1,800- END 1550 P 34 Connector dia. 110 Volt 4,400 rpm 5/8" x 11 UNC 600/ 5/8" x 11 UNC 15 Amp/ END 130/3.1 PO 36 up to 6" dia. 1,300/ 1 ¼ " x 7 UNC 110 Volt 2,800 rpm CORE DRILL MOTORS 230/ up to 14" 20 Amp/ EBM 352/3 39 1¼" male 500/ dia. 110 Volt 1,030 rpm 30 Amp 190/ up to 18" PLD 450 B 39 1¼" male Circuit/ 400/ dia. 110 Volt 840 rpm CORE DRILLING UNITS 5/8" and 18 Amp/ DBE 160 43 up to 6" dia. 450 rpm 1¼" x 7 UNC 110 Volt up to 6 3/8" 0-510/ ETN 162/3 PSA & 5/8" x 11 UNC & 19.5 Amp/ 44 dia. 0-1,150/ ETN 162/3 PSV 1 ¼ " x 7 UNC 110 Volt up to 8" dia. 0-2,500 rpm 230/ EBM 352/3 PSA & up to 14" 20 Amp/ 46 1¼" male 500/ EBM 352/3 PSV dia. 110 Volt 1,030 rpm 190/ up to 18" 30 Amp/ PLD 450 SA 47 1¼" male 400/ dia. 110 Volt 840 rpm 230 Volt machines are also available 24 DIAMOND CORE DRILLING CORE DIAMOND Motor long life and powerful Spindle connection standard connections for all attachments and accessories Locking switch for continuous operation (on a drill stand only) Metal gearbox Dust extraction*/ for long service life Water supply* integrated Mechanical safety clutch* for protection of the user Electronics optical overload indication* temperature control* Additional handle overcurrent cut-off* variable adjustment on the constant speed* collar for optimal positioning service-LED* for operator comfort * not present on all models FEATURES OF DIAMOND CORE DRILLS With the widest range of diamond core drills, CS Unitec and EIBENSTOCK have models for cutting holes from 5/32" to 18" dia. in fl oors, walls and ceilings. Fast drilling of reinforced concrete, concrete, brick, block and stone with hand-held and rig-mounted wet and dry models. Ideal for professional drilling applications, EIBENSTOCK core drills are powerful and reliable and are available with a wide range of accessories. Diamond dry core drill EHD 2000 S The universal tool for installation holes up to Ø 6" USE: – Dry drilling up to 6" in internal brick, brickwork, blockwork and other abrasive materials – Creating wall and roof openings for plumbing, heating and ventilation installations – For electrical installation work including switches and sockets INCLUDED FEATURES: 5/8" ADAPTER – Electronic – soft start, temperature control and overcurrent cut-off – Powerful 2-speed gearbox – Mechanical safety clutch – Additional handle – variable adjustment for operator comfort and safety DIAMETER DRY GEARS Ø6" 2 SPECIFICATIONS MODEL NO. EHD 2000 S Power input 13.6 Amp Rated voltage 110V ~ Load speed 0-1,000/0-2,000 rpm No-load speed 1,500/3,000 rpm Drilling diameter holes up to 6" dia. Spindle connection M 18 male + 5/8" x 11 UNC Collar diameter 52mm Weight 13 lbs. Supplied in a case without accessories DUST PROTECTION SYSTEM Silica dust may cause cancer! Concrete and stone drilling, grinding and sawing machines, when used with dust collection vacuums and accessories, off er additional protection to the operator. Users of this equipment should follow all OSHA and safety regulations. See page 101. 26 Diamond dry core drill A eHD 2000 S – ACCESSORIES WITHOUT DUST EXTRACTION Material Diamond dry drill bits Adapter ⅝" x 11 - M 18 for brickwork, soft concrete Ø 1" to Ø 6" 35512000 See pages 50-52 for Diamond Core Drill Bits DRILLING CORE DIAMOND WITH DUST EXTRACTION H Material Drill bit for socket outlets Dry M 16 Centering shaft Dust spring loaded extraction 35612000 for brickwork, soft concrete Length 2 ¾ " (70mm) Ø 2 ¾ " and Ø 3 ¼ " Centering shaft spring loaded 35612000 M 16 - M 18 for sand-lime brick Length 2 ¾ " (70mm) 35240000 Ø 2 ¾ " and Ø 3 ¼ " WITH DUST EXTRACTION M 18 - 1¼" Material Diamond dry drill bits 1¼" x 12 UNF Dust extraction for brickwork, Length 9" (228mm) sand-lime brick Ø 1" to Ø 6" 1¼" x 12 UNF - 5/8"- 11 UNC 4400125 Diamond drill bits see page 50-52 Industrial Wet/Dry Dust Collec- tion Vacuums – See page 101 HEPA Standard Sharpening block Copper ring 1¼" Filtration Filtration 8" x 4" x 2" for easy removal of the drill bit CS 1225 H CS 1225 35910000 35450000 1 piece 6.6 Gals. 6.6 Gals. CS 1500 H CS 1500 13 Gals. 13 Gals. CS 1445 H CS 1445 9 Gals. 9 Gals. 27 Diamond wet-dry core drill ETN 2001 P Easy to use for holes up to Ø 4" USE: – Dry drilling in sand-lime brick, brickwork, clinker, brick and other abrasive materials as well wet drilling in reinforced concrete, natural stone and asphalt – Plumbing, heating and ventilation construction, civil engineering, landscape construction FEATURES: – Electronic – soft start, temperature control and GFCI INCLUDED overcurrent cut-off, optical overload indication 5/8" & 1 1/4" – 2-speed oil bath gearbox – optimal lubrication ADAPTERS – Mechanical safety clutch – Water supply on the gearbox extension – Use for wet and dry drilling – Additional handle – variable adjustment on the collar DIAMETER WET/DRY GEARS Ø4" 2 SPECIFICATIONS MODEL NO. ETN 2001 P Power input 15 Amp Rated voltage 110 V ~ Load speed 0-800/0-1,570 rpm No-load speed 1,100/2,300 rpm free hand up to 3 ¼ " Drilling diameter with drill rig up to 4" Spindle connections M 18 male + 5/8" x 11 UNC + 1 ¼ " x 7 UNC Collar diameter 52mm External water supply – easy to service Weight 15 lbs. Supplied in a case without accessories DUST PROTECTION SYSTEM Silica dust may cause cancer! Concrete and stone drilling, grinding and sawing machines, when used with dust collection vacuums and accessories, off er additional protection to the operator. Users of this equipment should follow all OSHA and safety regulations. See page 101. 28 Diamond wet-dry core drill A ETn 2001 P – ACCESSORIES FOR WET DRILLING Material Centering device with water collection max. Ø 3 ¼ " Diamond wet drill bits 5/8" UNC 35849000 12" drilling depth for reinforced concrete Diamond wet drill bits 1¼" Combination adapter DIAMOND CORE DRILLING CORE DIAMOND 5/8" x 11 UNC, M 18 12" drilling depth M 18 for reinforced concrete 35110000 1 ¼" x 7 UNC, M 18 35112000 See pages 50-52 for Diamond Core Drill Bits Water suction ring Spare seals Hand-Held: 35875 for water suction ring For BST 104 Stand: 35897 79RK4955 FOR DRY DRILLING WITH DUST EXTRACTION 1¼" Material Diamond dry drill bits 1¼" x 12 UNF Dust extraction 12" drilling depth for brickwork, sand-lime brick 1¼" x 12 UNF - 5/8" x 11 UNC 4400125 Industrial Wet/Dry Dust Collection Vacuums – See page 101 HEPA Standard Filtration Filtration CS 1225 H CS 1225 Water Recycling Vacuum – See 6.6 Gals. 6.6 Gals. page 108 CS 1500 H CS 1500 Water tank Model CS 2000 vacuums slurry and 13 Gals. 13 Gals. 3 gallon with 3 ft. hose and debris, separates water and pumps CS 1445 H CS 1445 Gardena Connector clean water back to tool. Enables 9 Gals. 9 Gals. easy disposal of slurry. 251.623 Diamond drill bits see page 50-52 Drill rig BST 104/60 Sharpening block Copper ring 1¼" Specifications 8" x 4" x 2" for easy removal of the drill bit see page 41 35910000 35450000 1 piece Guide ring for centering device Please name order no. + Ø 358410 ... + 1", 1 ¼ ", 1 ½ ", 1 5⁄8", 2", 2 ¼ ", 2 ¾ ", 3 ¼ " 29 Diamond wet-dry core drill ETN 162/3 The versatile drill for drilling up to Ø 6-3/8" in concrete (up to 3" by hand and 6-3/8" with drill stand) USE: – Dry drilling in sand-lime block, brick and other abrasive materials – Wet drilling in reinforced concrete, natural stone and asphalt – Plumbing, heating and ventilation construction, civil engineering, landscape construction INCLUDED 5/8" ADAPTER FEATURES: – Newly developed, powerful 2,200 W motor, with high power reserves and a long lifetime – Electronic – soft start, temperature control and GFCI overcurrent cut-off, optical overload indication, constant speed – Service-LED – letting you know when the carbon brushes need changing (continues working approx. 10 DIAMETER WET/DRY GEARS working hours before shutdown) – 3 speed oil bath gearbox – for optimal lubrication in Ø8" 3 all working positions, due to the newly developed oil pump – Mechanical safety clutch SPECIFICATIONS MODEL NO. ETN 162/3 Power input 19.5 Amp – Combination spindle with integrated connection for Rated voltage 110 V ~ centering rod – fast, precise spot drilling Load speed 0-510/0-1,150/0-2,500 rpm – Ergonomic handle with large switch for control and 1.