Page 1/10 Safety Data Sheet acc. to OSHA HCS Printing date 11/11/2020 Version 2 Reviewed on 11/11/2020 1 Identification · Product identifier · Trade name: Non Silicone Grease · Article number: 582855-01 · Application of the substance / the mixture Grease · Details of the supplier of the safety data sheet · Supplier: Alfa Laval Tumba AB Hans Stahles väg 7 S-147 80 Tumba Sweden +46 8 530 650 00 [email protected] For additional questions regarding safety data sheets please contact your local Alfa Laval Sales Company which you find on www.alfalaval.com or in safety data sheet under section 16: Other Informaion · Information department: For additional questions regarding safety data sheets please contact your local Alfa Laval Sales Company which you find on www.alfalaval.com or in safety data sheet under section 16: Other Informaion · Emergency telephone number: US and Canada: 911 * 2 Hazard(s) identification · Classification of the substance or mixture Skin Sens. 1 H317 May cause an allergic skin reaction. · Label elements · GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS). · Hazard pictograms · Signal word Warning · Hazard-determining components of labeling: Zinc Naphthenate 1H-benzotriazole-1-methanamine,N,N-bis(2-ethylhexyl)-ar-methyl- · Hazard statements H317 May cause an allergic skin reaction. · Precautionary statements P261 Avoid breathing dust/fume/gas/mist/vapors/spray P272 Contaminated work clothing must not be allowed out of the workplace. P280 Wear protective gloves. P302+P352 If on skin: Wash with plenty of water. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P321 Specific treatment (see on this label). P363 Wash contaminated clothing before reuse. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. (Contd. on page 2) US 51.1.17 Page 2/10 Safety Data Sheet acc. to OSHA HCS Printing date 11/11/2020 Version 2 Reviewed on 11/11/2020 Trade name: Non Silicone Grease (Contd. of page 1) · Other hazards Information on high pressure equipment: Accidental speed injection under the skin of this type of material can cause serious injury. Seek immediately medical attention if an accident of this nature occur. It is possible that the wound at the injection site does not look so severe at first sight, but it is not treated it can lead to malformation or amputation of the affected limb. · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. * 3 Composition/information on ingredients · Chemical characterization: Mixtures · Description: CAS: 68411-46-1 Benzenamine, N-phenyl-, reaction products with 2,4,4- 1-<2.5% trimethylpentene CAS: 1310-66-3 Lithium hydroxide hydrate 0.1-<1% Skin Corr. 1C, H314; Eye Dam. 1, H318; Acute Tox. 4, H302 · Dangerous components: CAS: 18621-94-8 Dilithium adipate 1-<5% Acute Tox. 4, H302 CAS: 68457-79-4 Zinc dialkyl dithiophosphate 1-<1.7% Eye Dam. 1, H318; Skin Irrit. 2, H315 Zinc Naphthenate Eye Irrit. 2A, H319; Skin Sens. 1, H317 CAS: 94270-86-7 1H-benzotriazole-1-methanamine,N,N-bis(2-ethylhexyl)-ar-methyl- 0.1-<0.2% Skin Irrit. 2, H315; Skin Sens. 1, H317 4 First-aid measures · Description of first aid measures · General information: Wash contaminated clothing before reuse. · After inhalation: Supply fresh air; consult doctor in case of complaints. · After skin contact: Wash with water and soap. Take off immediately all contaminated clothing. · After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. · After swallowing: If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label. · Most important symptoms and effects, both acute and delayed Headache Dizziness Nausea Allergic reactions High pressure injection under skin: local necrosis. (Contd. on page 3) US 51.1.17 Page 3/10 Safety Data Sheet acc. to OSHA HCS Printing date 11/11/2020 Version 2 Reviewed on 11/11/2020 Trade name: Non Silicone Grease (Contd. of page 2) · Indication of any immediate medical attention and special treatment needed Information on high pressure equipment: Accidental speed injection under the skin of this type of material can cause serious injury. Seek immediately medical attention if an accident of this nature occurs. Even if the wound at the injection site does not look that severe at a first glance, it may lead to malformation or amputation of the affected limb if not treated directly. 5 Fire-fighting measures · Extinguishing media · Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam. · For safety reasons unsuitable extinguishing agents: Water with full jet · Special hazards arising from the substance or mixture In case of fire, the following can be released: Poisonous gases/vapors Aldehyde Sulphur dioxide (SO2) COx · Advice for firefighters · Protective equipment: Wear self-contained respiratory protective device. In case of fire: Evacuate area. · Additional information Cool endangered receptacles with water spray. Dispose of fire debris and contaminated fire fighting water in accordance with official regulations. 6 Accidental release measures · Personal precautions, protective equipment and emergency procedures Avoid contact with spilled material. Particular danger of slipping on leaked/spilled product. · Environmental precautions: Do not allow to enter sewers/ surface or ground water. · Methods and material for containment and cleaning up: Pick up mechanically. Send for recovery or disposal in suitable receptacles. · Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. · Protective Action Criteria for Chemicals · PAC-1: CAS: 1310-66-3 Lithium hydroxide hydrate 0.16 mg/m³ · PAC-2: CAS: 1310-66-3 Lithium hydroxide hydrate 1.8 mg/m³ (Contd. on page 4) US 51.1.17 Page 4/10 Safety Data Sheet acc. to OSHA HCS Printing date 11/11/2020 Version 2 Reviewed on 11/11/2020 Trade name: Non Silicone Grease (Contd. of page 3) · PAC-3: CAS: 1310-66-3 Lithium hydroxide hydrate 74 mg/m³ 7 Handling and storage · Handling: · Precautions for safe handling Avoid contact with skin. After contact with skin, wash immediately with plenty of water · Information about protection against explosions and fires: No special measures required. · Conditions for safe storage, including any incompatibilities · Storage: · Requirements to be met by storerooms and receptacles: Keep container tightly closed. · Information about storage in one common storage facility: Store away from oxidizing agents. · Further information about storage conditions: None. · Specific end use(s) Professional use only. 8 Exposure controls/personal protection · Additional information about design of technical systems: No further data; see item 7. · Control parameters · Components with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. · Additional information: The lists that were valid during the creation were used as basis. · Exposure controls · Personal protective equipment: · General protective and hygienic measures: The usual precautionary measures for handling chemicals should be followed. Be sure to clean skin thoroughly after work and before breaks. Use only in well-ventilated areas. · Breathing equipment: Use suitable respiratory protective device in case of insufficient ventilation. · Protection of hands: Protective gloves · Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. · Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. · Eye protection: If eye contact is likely, safety glasses with side shields are recommended. · Body protection: Oil resistant protective clothing (Contd. on page 5) US 51.1.17 Page 5/10 Safety Data Sheet acc. to OSHA HCS Printing date 11/11/2020 Version 2 Reviewed on 11/11/2020 Trade name: Non Silicone Grease (Contd. of page 4) · Limitation and supervision of exposure into the environment Avoid release to the environment. * 9 Physical and chemical properties · Information on basic physical and chemical properties · General Information · Appearance: Form: Highly viscous Color: Red · Odor: Characteristic · Odor threshold: Not determined. · pH-value: Not determined. · Change in condition Melting point/Melting range: Undetermined. Boiling point/Boiling range: >316 °C (>600.8 °F) · Flash point: >204 °C (>399.2 °F) · Flammability (solid, gaseous): Not determined. · Decomposition temperature: Not determined. · Auto igniting: Product is not selfigniting. · Danger of explosion: Product does not present an explosion hazard. · Explosion limits: Lower: Not determined. Upper: Not determined. · Oxidizing properties Not applicable. · Vapor pressure: <0.013 kPa · Density at 20 °C (68 °F): 0.862 g/cm³ (7.19339 lbs/gal) · Relative density at 15 °C (59 °F) 1 · Vapor density Not applicable. · Evaporation rate Not applicable. · Solubility in / Miscibility