LINKS 700 9-SPEED PERFORMANCE CHAIN 1/2" x 3/32" BICYCLE CHAIN CHAIN TOOL REQUIRED (NOT INCLUDED) INSTALLATION: 1. REMOVE THE OLD CHAIN. NOTE: IF YOUR OLD CHAIN IS NOT A "NO TOOLS REQUIRED" DESIGN, YOU MUST USE A CHAIN TOOL. 2. COMPARE THE LENGTH OF YOUR OLD CHAIN TO THE NEW ONE, THEY SHOULD BE THE SAME NUMBER OF LINKS. NOTE: YOUR NEW CHAIN HAS 115 LINKS AND WILL FIT THE VAST MAJORITY OF DERAILLEUR BIKES ON THE MARKET. HOWEVER, IF YOUR NEW CHAIN IS TOO SHORT, DO NOT USE IT. TOO SHORT OF A CHAIN MAY RESULT IN SERIOUS INJURY TO YOU AND/OR DAMAGE TO YOUR BICYCLE. CONSULT A TRAINED BICYCLE MECHANIC FOR ADVICE. IF YOUR BICYCLE HAS A REAR DERAILLEUR AND YOUR CHAIN IS TOO LONG, IT IS POSSIBLE TO SHORTEN YOUR NEW CHAIN BY REMOVING LINKS FROM THE END WITH A CHAIN TOOL. CONSULT A TRAINED BICYCLE MECHANIC FOR ADVICE. 3. INSTALL YOUR NEW CHAIN BY THREADING IT THROUGH THE DERAILLEURS AND OVER THE FRONT SPROCKET AND REAR GEAR COGS. 4. WRAP THE CHAIN AROUND SO THAT THE FREE MASTER-LINK RIVET CAN BE PASSED THROUGH THE OPEN CHAIN LINK. 5. PLACE THE MASTER-LINK TOP PLATE OVER THE TOP OF THE FREE RIVET. 6. GENTLY BEND THE MASTER-LINK WHILE APPLYING PRESSURE TO THE TOP PLATE UNTIL YOU HEAR A "CLICK." THE CHAIN IS THEN CORRECTLY ASSEMBLED. 7. CHECK THE ENTIRE CHAIN TO ENSURE NO STIFF OR STICKING LINKS. NOTE: KEEP YOUR CHAIN PROPERLY LUBRICATED. ALWAYS LUBRICATE YOUR CHAIN IF IT HAS BEEN EXPOSED TO WET CONDITIONS. For warranty details go to www.thebellgarage.com WARNING: AN IMPROPERLY INSTALLED CHAIN CAN LEAD TO ACCIDENTS OR INJURIES. TEST RIDE NEW CHAIN CAREFULLY BEFORE NORMAL USE. CHECK CONNECTIONS AFTER BRIEF TEST RIDE. FOR BICYCLE USE ONLY. W W W.THEBELLGARAGE.COM © 2012 Bell Sports, Inc. / 1-800-456-BELL 1924 County Road 3000 North / Rantoul, IL 61866 USA Made in China INCLUDES: ONE BIKE 7016558 LINKS 700 CHAIN CHAIN AND MASTER LINK 0 35011 90527 3.