Gordon V. Sig Sauer, Inc

Gordon V. Sig Sauer, Inc

Case 4:19-cv-00585 Document 1 Filed on 02/20/19 in TXSD Page 1 of 31 IN THE UNITED STATES DISTRICT COURT FOR THE SOUTHERN DISTRICT OF TEXAS HOUSTON DIVISION DANTÉ GORDON, individually and on behalf of all others similarly situated, CASE NO. _____________ Plaintiff, v. CLASS ACTION COMPLAINT SIG SAUER, INC., JURY TRIAL DEMANDED Defendant. PLAINTIFF’S ORIGINAL COMPLAINT Plaintiff Danté Gordon, individually and on behalf of all others similarly situated as set forth herein, alleges as follows: NATURE OF THE ACTION 1. This is a class action brought by gun owners against Defendant SIG SAUER, Inc. (“SIG” or “SIG SAUER”) for manufacturing, distributing, and selling SIG P320-brand semi- automatic pistols that, due to a defect, can inadvertently discharge a round of ammunition if dropped on the ground (a “drop fire”). SIG repeatedly misrepresented and warranted that the P320 pistols were “drop safe,” “won’t fire unless you want [them] to,” and are “originally manufactured free of defects in material, workmanship and mechanical function.” SIG’s original design and manufacture of the P320 pistol rendered the weapon unreasonably dangerous for its intended uses. 2. The P320 is a popular and commercially successful pistol. It is used by law enforcement agencies all over the country, and owned by hundreds of thousands of civilians. In Case 4:19-cv-00585 Document 1 Filed on 02/20/19 in TXSD Page 2 of 31 2016, the U.S. Army selected the SIG P320 to replace the M9 service pistol as the standard-issue sidearm of U.S. military servicemembers. 3. SIG has known about the drop fire defect since at least April 20, 2016, when the U.S. Army discovered the defect during its field testing. In the Army’s assessment, a heavy and defective trigger and sear caused the drop fire issue.1 The Army insisted that SIG fix the deficiency by installing a lighter trigger and modified sear. SIG promptly implemented this fix for the military versions of the P320. However, SIG continued to manufacture defective P320 pistols for the civilian market until late 2017. Currently, there are believed to be approximately 500,000 defective P320 pistols in circulation in the civilian market. 4. Pistols should not discharge upon mere impact with the ground. Drop fires are extremely rare and are abnormal in the firearms industry. A 2015 study from the U.S. Center for Disease Control and Prevention analyzed data from 27 states and found that in 193 cases in which people were killed “due to unintentional firearm-related injuries,” a “dropped gun” was to blame in only 12 of those deaths.2 5. By filing this action, Plaintiff does not intend to infringe upon any rights conferred by the Second Amendment. Plaintiff is a responsible and law-abiding citizen who believes firearms should function properly and safely. Among other things, Plaintiff wants to ensure that gun owners like himself are not duped into paying hundreds of dollars for guns that are unsafe. 6. For all the reasons set forth herein, including but not limited to SIG’s failure to disclose a material safety defect with its P320, Plaintiff seeks relief in this action individually, and 1 The sear is the part of the trigger mechanism that holds the hammer, striker, or bolt back until the correct amount of pressure has been applied to the trigger; at which point the hammer, striker, or bolt is released to discharge the weapon. In other words, the sear constitutes the system of levels that connects the trigger to the firing mechanism (i.e., the “striker” in a SIG P320, which is similar to a firing pin in a rifle). 2 Drop fires are often depicted in media and popular culture, such as Hollywood movies. However, these depictions are fictional. Drop fires are not normal. 2 Case 4:19-cv-00585 Document 1 Filed on 02/20/19 in TXSD Page 3 of 31 as a class action on behalf of similarly situated purchasers of SIG P320 pistols, for: (i) violation of the Magnuson-Moss Warranty Act; (ii) breach of express warranty; (iii) breach of the implied warranty of merchantability; (iv) unjust enrichment; (v) fraudulent concealment; (vi) fraud; and (vii) violation of the Texas Deceptive Trade Practices Act (“TDTPA”), Tex. Bus. & Com. Code §§ 17.41, et seq. THE PARTIES 7. Plaintiff Danté Gordon is a citizen of Texas, residing in Katy, Texas. Plaintiff Gordon purchased a civilian version of the SIG P320 pistol for approximately $545 from an AGR Outdoors store in Cypress, Texas in September, 2014. Prior to his purchase, Plaintiff Gordon reviewed the portion of the SIG SAUER website concerning the P320 pistol. Plaintiff Gordon’s P320 pistol is defective in that it has the original trigger and sear, and is susceptible to an unintentional drop fire. Plaintiff Gordon reasonably relied on SIG’s marketing statements about the safety of the firearm, as well as SIG’s reputation for producing high-quality weapons, when he purchased his SIG P320 pistol. When purchasing his SIG P320 pistol, Plaintiff Gordon reviewed the accompanying labels, disclosures, warranties, and marketing materials, understood them as representations and warranties by SIG that the P320 was properly manufactured, free from defects, was “drop safe” and “won’t fire unless you want it to.” But these representations were false. Plaintiff Gordon relied on these representations and warranties in deciding to purchase his SIG P320, and these representations and warranties were part of the basis of the bargain, in that he would not have purchased his SIG P320 if he had known that it was not, in fact, properly manufactured, free from defects, and had he known that it was susceptible to drop fires. Plaintiff Gordon also understood that in making the sale, the retailer was acting with the knowledge and approval of SIG and/or as the agent of SIG. Plaintiff Gordon also understood that each purchase involved a direct transaction between himself and SIG, because his P320 came with packaging and 3 Case 4:19-cv-00585 Document 1 Filed on 02/20/19 in TXSD Page 4 of 31 other materials prepared by SIG, including representations and warranties that his P320 was properly manufactured free from defects, was “drop safe” and “won’t fire unless you want it to.” 8. Defendant SIG SAUER, Inc. is a Delaware corporation with its principal place of business at 72 Pease Boulevard, Portsmouth, NH 03801-6801. SIG a leading global designer and manufacturer of firearms for military, law enforcement, and commercial markets. SIG offers pistols, rifles, short barrel rifles, firearms accessories, apparel, CD/DVD training, and knives. The company also provides customized training in security subjects for corporate customers and law enforcement agencies on a contract basis. SIG markets and sells its products through dealers. SIG SAUER, Inc. was formerly known as SIGARMS, Inc. and changed its name to SIG SAUER, Inc. in October 2007. SIG may be served through its Registered Agent, Cogency Global Inc., 1601 Elm Street, Suite 4360, Dallas, TX 75201. JURISDICTION AND VENUE 9. This Court has jurisdiction over this action pursuant to 28 U.S.C. § 1332(d) because there are more than 100 class members and the aggregate amount in controversy exceeds $5,000,000.00, exclusive of interest, fees, and costs, and at least one class member is a citizen of a state different from Defendant. 10. Venue is proper in this judicial district pursuant to 28 U.S.C. § 1391 because Plaintiff Gordon is a citizen of Texas and resides in this District, a substantial part of the events giving rise to Plaintiff’s claims took place within this District, and documents and witnesses are likely to be located within this District. Moreover, Defendant distributed, advertised, and sold the SIG P320 pistol, which is the subject of the present complaint, in this District. 4 Case 4:19-cv-00585 Document 1 Filed on 02/20/19 in TXSD Page 5 of 31 FACTS COMMON TO ALL CLAIMS A. SIG Repeatedly Represents That The P320 Is “Drop Safe,” “Won’t Fire Unless You Want It To,” And Is “Originally Manufactured Free Of Defects.” 11. In its “Safety Without Compromise” marketing campaign for the P320, which appears on its website among other places, SIG represents: “We’ve designed safety elements into every necessary feature on this pistol. From the trigger, to the striker and even the magazine, the P320 won’t fire unless you want it to:” 12. Under the heading “Striker Safety,” SIG further states that the design of the P320 “[p]revents the striker from releasing unless the trigger is pulled:” 13. SIG further represents in the same marketing materials that the P320 is “drop safe:” 5 Case 4:19-cv-00585 Document 1 Filed on 02/20/19 in TXSD Page 6 of 31 14. However, the SIG P320 is not “drop safe” because it can discharge unintentionally when dropped. 15. SIG also provides a “Limited Lifetime Warranty” for P320 purchasers, which states that “SIG SAUER warrants that the enclosed firearm was originally manufactured free of defects in material, workmanship and mechanical function:” 6 Case 4:19-cv-00585 Document 1 Filed on 02/20/19 in TXSD Page 7 of 31 16. However, the SIG P320 is not “manufactured free of defects” because it can discharge unintentionally when dropped. B. On April 20, 2016, The U.S. Department Of Defense Discovered The Drop Fire Defect, Which SIG Promptly Fixed For Military Versions Of The Pistol. 17. In 2015, the U.S. Army sought to replace the standard-issue M9 service pistol that had been in use since 1980.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    37 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us