SRIXON U.S.A. SRIXON SPORTS ASIA SDN. BHD. 5601 Skylab Rd., Huntington Beach, CA 92647, U.S.A. 1 Jalan U1/32, Hicom Glenmarie Industrial Park, 40150 Shah Alam, Tel: 1-714-889-1300 Fax: 1-714-889-5890 Selangor Darul Ehsan, Malaysia Tel:60-3-5569-3438 Fax:60-3-5569-3436 SRIXON CANADA 19099 25th Ave. #104 Surrey. BC, V3S 3V2, Canada SRIXON SPORTS (THAILAND) CO.,LTD. Tel: 1-604-542-0911 Fax: 1-604-542-0955 952 Ramaland Bld. Fl#17, Rama IV Road, Suriyawongse, Bangrak, Bangkok 10500 Thailand SRIXON SPORTS EUROPE, LTD. Tel:66-(0)2-632-6630 Fax:66-(0)2-632-6633 3, Newman Lane Industrial Estate, Alton, Hampshire, GU34 2QR, UK. CHANGSHU SRIXON SPORTS Co., LTD. Tel:44-(0)-1420-541709 Fax:44-(0)-1420-87899 NO.9, Yangzijiang Road, ChangShu Economic Development Zone, Jiangsu, China. SRIXON SPORTS AUSTRALASIA, PTY. LTD. Tel:86-(0)-512-5269-2000 Fax:86-(0)-512-5269-2600 2/707 Forest Road, Peakhurst, PO Box 152, Peakhurst, NSW 2210, Australia SRIXON SPORTS HONG KONG Co., LTD. Tel:61-(02)-9584-8111 Fax:61-(02)-9584-8339 Unit 06, 11/F., SOLO Bldg., 41-43 Carnarvon Road, Tsimshatsui, KLN, HK. SRIXON SPORTS SOUTH AFRICA (PTY) LTD. Tel:852-2316-2286 Fax:852-2316-2213 Unit 6 Pentagon Park, Capital Hill Commercial Estate Le Roux Road. Midrand, Johonnesburg South Africa DUNLOP SPORTS KOREA CO.,LTD. Tel:27-11-805-6339 Fax:27-11-805-0464 4th Fl, 76, Sapyeong-daero, Seocho-gu, Seoul, 137-806, Korea DUNLOP SPORTS CO. LTD. Tel:82-(2)-3462-3957 Fax:82-(2)-3462-5333 3-6-9 Wakinohama-cho, Chuo-ku, Kobe, Hyogo 651-0072, Japan TEL: +81-78-265-3200 FAX: +81-78-265-3135 SRIXON.COM Instruction Manual / Setting Adjustments THANK YOU FOR YOUR PURCHASE.. Our mission is to make you better. One shot, one round, one weekend at a time. We can’t promise it will be overnight. No one can. But we can say we’ll be there. With meaningful innovations that start in the lab, not the marketing department. We’re here to play, to challenge, to compete at the highest level. We’re here for the Journey. THE JOURNEY TO BETTER. THANK YOU FOR YOUR PURCHASE.. Our mission is to make you better. One shot, one round, one weekend at a time. We can’t promise it will be overnight. No one can. But we can say we’ll be there. With meaningful innovations that start in the lab, not the marketing department. We’re here to play, to challenge, to compete at the highest level. We’re here for the Journey. THE JOURNEY TO BETTER. PART NAMES AND FEATURES QTS sleeve Change position to set desired face angle, lie angle, and loft angle Table Of Contents Part names and features P04 How to install and remove QTS sleeve P05 Z 355 Driver How to install and remove QTS sleeve (sleeve installation) P07 Accessories QTS Sleeve performance guide P09 QTS Sleeve position overview P11 Important Precautions! Please Read P13 Custom torque wrench PART NAMES AND FEATURES QTS sleeve Change position to set desired face angle, lie angle, and loft angle Table Of Contents Part names and features P04 How to install and remove QTS sleeve P05 Z 355 Driver How to install and remove QTS sleeve (sleeve installation) P07 Accessories QTS Sleeve performance guide P09 QTS Sleeve position overview P11 Important Precautions! Please Read P13 Custom torque wrench HOW TO INSTALL AND REMOVE QTS SLEEVE Hold the club upright with Supporting the head in your hand, Loosen Tighten the grip resting on the ground. gently insert the torque wrench Use this position when loosening into the screw hole. With the torque wrench With the torque wrench and tightening. aligned with the shaft, aligned with the shaft, turn it counterclockwise. turn it clockwise until you hear a ‘click’. Shaft and torque Improperly aligned wrench should torque wrench form a straight line Do not use any tool other than the supplied torque wrench. When removing the QTS sleeve, be careful not to loosen the screw too much, Also do not use the supplied torque wrench on any other products. as you may drop the screw and lose the washer. Damaged QTS sleeve and/or improperly installed Once you hear a ‘click’, stop tightening. QTS sleeve may result in injury or product damage. Over-tightening may damage the QTS sleeve. * Not compatible with SRIXON Z-STAR series torque wrenches. Using a golf club with a broken washer may damage the club head or the sleeve. Position the torque wrench so that it is correctly aligned with the shaft. Always tighten until you hear a ‘click’. Failure to insert the tip of the torque wrench firmly into the screw hole may Failure to tighten until you hear a ‘click’ may result in separation of the club result in damage to the screw. head or product damage. HOW TO INSTALL AND REMOVE QTS SLEEVE Hold the club upright with Supporting the head in your hand, Loosen Tighten the grip resting on the ground. gently insert the torque wrench Use this position when loosening into the screw hole. With the torque wrench With the torque wrench and tightening. aligned with the shaft, aligned with the shaft, turn it counterclockwise. turn it clockwise until you hear a ‘click’. Shaft and torque Improperly aligned wrench should torque wrench form a straight line Do not use any tool other than the supplied torque wrench. When removing the QTS sleeve, be careful not to loosen the screw too much, Also do not use the supplied torque wrench on any other products. as you may drop the screw and lose the washer. Damaged QTS sleeve and/or improperly installed Once you hear a ‘click’, stop tightening. QTS sleeve may result in injury or product damage. Over-tightening may damage the QTS sleeve. * Not compatible with SRIXON Z-STAR series torque wrenches. Using a golf club with a broken washer may damage the club head or the sleeve. Position the torque wrench so that it is correctly aligned with the shaft. Always tighten until you hear a ‘click’. Failure to insert the tip of the torque wrench firmly into the screw hole may Failure to tighten until you hear a ‘click’ may result in separation of the club result in damage to the screw. head or product damage. HOW TO INSTALL AND REMOVE QTS SLEEVE (SLEEVE INSTALLATION) Insert the shaft into the head QTS setting examples Align the position line with the For right position For left position mark and press straight in. (Open face) (Closed face) * Illustration shows neutral position Align the mark on the head with the ‘R’ Align the mark on the head with the ‘L’ on the QTS sleeve and press straight in. on the QTS sleeve and press straight in. The shaft may not insert fully if the position line and sleeve mark are not correctly aligned. Press the shaft all the way in until the QTS sleeve is completely covered. Check to see that the QTS sleeve is properly secured. Tighten the sleeve until you hear a ‘click’. If you fail to properly secure the sleeve, there is a possibility that the head may come off in mid swing, injuring either you or a bystander. HOW TO INSTALL AND REMOVE QTS SLEEVE (SLEEVE INSTALLATION) Insert the shaft into the head QTS setting examples Align the position line with the For right position For left position mark and press straight in. (Open face) (Closed face) * Illustration shows neutral position Align the mark on the head with the ‘R’ Align the mark on the head with the ‘L’ on the QTS sleeve and press straight in. on the QTS sleeve and press straight in. The shaft may not insert fully if the position line and sleeve mark are not correctly aligned. Press the shaft all the way in until the QTS sleeve is completely covered. Check to see that the QTS sleeve is properly secured. Tighten the sleeve until you hear a ‘click’. If you fail to properly secure the sleeve, there is a possibility that the head may come off in mid swing, injuring either you or a bystander. QTS SLEEVE PERFORMANCE GUIDE The sleeve is set to N (Neutral) at time of puchase. Select from 12 different positions to set your preferred face angle, Refer to the guide to set your preffered trajectory. lie angle, and loft angle. Lateral range of adjustment depending on sleeve position Flight can be adjusted laterally by approx. 37 yards High trajectory Low trajectory Approx. 37 yards Draw Fade QTS SLEEVE PERFORMANCE GUIDE The sleeve is set to N (Neutral) at time of puchase. Select from 12 different positions to set your preferred face angle, Refer to the guide to set your preffered trajectory. lie angle, and loft angle. Lateral range of adjustment depending on sleeve position Flight can be adjusted laterally by approx. 37 yards High trajectory Low trajectory Approx. 37 yards Draw Fade QTS SLEEVE POSITION OVERVIEW QTS SLEEVE POSITION OVERVIEW Important To ensure a safe and satisfying golfing experience, please be sure to follow these Important Precautions. Precautions Be sure to read the Important Precautions carefully and exercise appropriate care. The manufacturer assumes no liability for injury or product damage due to failure to comply with the instructions herein. CARE AND STORAGE Only remove the QTS sleeve when making adjustments. All parts Avoid adjusting the QTS sleeve when the temperature is below should remain properly installed at all other times, including when -5°C or above 45°C, as it may damage the sleeve.