IG55 ARGON NITROGEN MIXTURE IG55 Argon Nitrogen Mixture FPG INERT® IG-55 is a mixture with 50% ARGON (IG-01) and with 50% NITROGEN (IG-100). It is an inert gas, non-conductive, colourless, odourless and flavourless. Features It is non corrosive and may be used at normal temperatures ▼ Natural gas present in the atmosphere with such materials as nickel, steel, stainless steel, copper, brass, bronze and plastics .product innovation. ▼ Design in compliance with ISO 14520, Discharge is through valves fully developed and approved NFPA 2001 and CEA 4008 by the most renowned independent organizations. They ▼ Suitable for occupied areas offer a great flexible adaptability for all actuation and release systems currently used in the market, even ▼ Electrically non-conductive allowing combinations of several of them. ▼ No residue to clean up after the discharge The design of the system protects against accidental ▼ More economical and less storage space actuation due to any small leak. They also allow checking and maintenance of all critical elements contained in a fixed ▼ Zero Ozone Depletion Potential extinguishing system, at the time of commissioning and later for system preventive maintenance, thus preventing the ▼ No greenhouse effect risk of accidental discharge. As a general rule, extinguishing ▼ No decomposition products concentration is achieved when oxygen contents in the air is reduced from its usual level of 20,9% to values lower than 15% depending on the combustible products. INERT® IG-55 is stored in high-pressure cylinders in the form of compressed gas, thus space required for such cylinder storage depends on pressure and capacity. All Correspondence, Registered Office: Fire Protection Group (FPG) Ltd, 28 Mill Road Industrial Estate, Linlithgow, West Lothian EH49 7SF Tel: 01506 848080 Fax: 01506 847831 Email: [email protected] www.fpgltd.co.uk LINLITHGOW WARRINGTON BELLSHILL.