DURAM ROCKTUFF (BLACK, DARK GREY, LIGHT GREY, YELLOW) Duram Pty Ltd Chemwatch Hazard Alert Code: 3 Chemwatch: 5234-49 Issue Date: 07/03/2020 Version No: 5.1.8.7 Print Date: 22/06/2021 Safety Data Sheet according to WHS Regulations (Hazardous Chemicals) Amendment 2020 and ADG requirements L.GHS.AUS.EN SECTION 1 Identification of the substance / mixture and of the company / undertaking Product Identifier Product name DURAM ROCKTUFF (BLACK, DARK GREY, LIGHT GREY, YELLOW) Chemical Name Not Applicable Synonyms Rocktuff. Liquid polyurethane, anti-slip protective coating. PAINT (including paint, lacquer, enamel, stain, shellac, varnish, polish, liquid filler and liquid lacquer base) or PAINT RELATED MATERIAL Proper shipping name (including paint thinning or reducing compound) Chemical formula Not Applicable Other means of identification Not Available Relevant identified uses of the substance or mixture and uses advised against Anti-slip protective coating for: Domestic: decks, balconies, patios, garages, steps, pool surround. Schools: playgrounds, demountable Relevant identified uses classrooms, walkways, toilets. Hospitality: kitchen and bar areas. Building Construction: flooring, traffic areas, driveways, bridges. Details of the supplier of the safety data sheet Registered company name Duram Pty Ltd Address 51 Prince William Drive Seven Hills NSW 2147 Australia Telephone +61 2 9624 4007 Fax +61 2 9624 4079 Website www.duram.com.au Email [email protected] Emergency telephone number Association / Organisation CHEMTREC Australia (Sydney) Emergency telephone +612 9037 2994 24 hours / 7 days numbers Other emergency telephone Not Available numbers SECTION 2 Hazards identification Classification of the substance or mixture HAZARDOUS CHEMICAL. DANGEROUS GOODS. According to the WHS Regulations and the ADG Code. ChemWatch Hazard Ratings Min Max Flammability 2 Toxicity 2 0 = Minimum Body Contact 2 1 = Low 2 = Moderate Reactivity 1 3 = High Chronic 3 4 = Extreme Poisons Schedule Not Applicable Skin Corrosion/Irritation Category 2, Eye Irritation Category 2A, Skin Sensitizer Category 1, Respiratory Sensitizer Category 1, Germ cell mutagenicity Category 2, Carcinogenicity Category 2, Specific target organ toxicity - single exposure Category 3 (respiratory tract irritation), Classification [1] Specific target organ toxicity - single exposure Category 3 (narcotic effects), Aspiration Hazard Category 1, Acute Aquatic Hazard Category 3, Chronic Aquatic Hazard Category 3, Flammable Liquid Category 3 Legend: 1. Classified by Chemwatch; 2. Classification drawn from HCIS; 3. Classification drawn from Regulation (EU) No 1272/2008 - Annex VI Label elements Page 1 continued... Chemwatch: 5234-49 Page 2 of 30 Issue Date: 07/03/2020 Version No: 5.1.8.1 DURAM ROCKTUFF (BLACK, DARK GREY, LIGHT GREY, YELLOW) Print Date: 22/06/2021 Hazard pictogram(s) Signal word Danger Hazard statement(s) H315 Causes skin irritation. H319 Causes serious eye irritation. H317 May cause an allergic skin reaction. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H341 Suspected of causing genetic defects. H351 Suspected of causing cancer. H335 May cause respiratory irritation. H336 May cause drowsiness or dizziness. H304 May be fatal if swallowed and enters airways. H412 Harmful to aquatic life with long lasting effects. H226 Flammable liquid and vapour. Precautionary statement(s) Prevention P201 Obtain special instructions before use. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261 Avoid breathing mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves, protective clothing, eye protection and face protection. P284 [In case of inadequate ventilation] wear respiratory protection. P240 Ground and bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/lighting/intrinsically safe equipment. P242 Use non-sparking tools. P243 Take action to prevent static discharges. P273 Avoid release to the environment. P264 Wash all exposed external body areas thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. Precautionary statement(s) Response P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/physician/first aider. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P308+P313 IF exposed or concerned: Get medical advice/ attention. P331 Do NOT induce vomiting. P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor/physician/first aider. P370+P378 In case of fire: Use alcohol resistant foam or normal protein foam to extinguish. P302+P352 IF ON SKIN: Wash with plenty of water and soap. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 Call a POISON CENTER/doctor/physician/first aider/if you feel unwell. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Precautionary statement(s) Storage P403+P235 Store in a well-ventilated place. Keep cool. P405 Store locked up. Precautionary statement(s) Disposal P501 Dispose of contents/container to authorised hazardous or special waste collection point in accordance with any local regulation. SECTION 3 Composition / information on ingredients Substances See section below for composition of Mixtures Continued... Chemwatch: 5234-49 Page 3 of 30 Issue Date: 07/03/2020 Version No: 5.1.8.1 DURAM ROCKTUFF (BLACK, DARK GREY, LIGHT GREY, YELLOW) Print Date: 22/06/2021 Mixtures CAS No %[weight] Name Not Available 30-60 urethane polymer (non-hazardous) 64742-95-6 10-30 naphtha petroleum, light aromatic solvent 9002-88-4 10-30 polyethylene 95-63-6 1-10 1,2,4-trimethyl benzene 13463-67-7 <10 titanium dioxide 117-81-7 <10 di-sec-octyl phthalate 25686-28-6 <5 MDI homopolymer 101-68-8 <5 4,4'-diphenylmethane diisocyanate (MDI) 6358-31-2 <5 C.I. Pigment Yellow 74 108-67-8 <5 1,3,5-trimethyl benzene 1333-86-4 <5 carbon black 7631-86-9 <5 silica amorphous 98-82-8 <1 cumene 108-83-8 <1 diisobutyl ketone 68037-01-4 <1 1-decene homopolymer, hydrogenated 41556-26-7 <1 bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate 4083-64-1 <1 p-toluenesulfonyl isocyanate 125643-61-0 <1 C7-9 branched alkyl-3,5-di-tert-butyl-4-hydroxyhydrocinnamate 1185-81-5 <1 dibutyltin dilauryl mercaptide 82919-37-7 <1 methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate Legend: 1. Classified by Chemwatch; 2. Classification drawn from HCIS; 3. Classification drawn from Regulation (EU) No 1272/2008 - Annex VI; 4. Classification drawn from C&L; * EU IOELVs available SECTION 4 First aid measures Description of first aid measures If this product comes in contact with the eyes: Immediately hold eyelids apart and flush the eye continuously with running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper Eye Contact and lower lids. Continue flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes. Transport to hospital or doctor without delay. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel. If skin contact occurs: Immediately remove all contaminated clothing, including footwear. Flush skin and hair with running water (and soap if available). Seek medical attention in event of irritation. For thermal burns: Decontaminate area around burn. Consider the use of cold packs and topical antibiotics. For first-degree burns (affecting top layer of skin) Hold burned skin under cool (not cold) running water or immerse in cool water until pain subsides. Use compresses if running water is not available. Cover with sterile non-adhesive bandage or clean cloth. Do NOT apply butter or ointments; this may cause infection. Give over-the counter pain relievers if pain increases or swelling, redness, fever occur. For second-degree burns (affecting top two layers of skin) Cool the burn by immerse in cold running water for 10-15 minutes. Use compresses if running water is not available. Do NOT apply ice as this may lower body temperature and cause further damage. Do NOT break blisters or apply butter or ointments; this may cause infection. Skin Contact Protect burn by cover loosely with sterile, nonstick bandage and secure in place with gauze or tape. To prevent shock: (unless the person has a head, neck, or leg injury, or it would cause discomfort): Lay the person flat. Elevate feet about 12 inches. Elevate burn area above heart level, if possible. Cover the person with coat or blanket. Seek medical assistance. For third-degree burns Seek immediate medical or emergency assistance. In the mean time: Protect burn area cover loosely with sterile, nonstick bandage or, for large areas, a sheet or other material that will not leave lint in wound. Separate burned toes and fingers with dry, sterile dressings. Do not soak burn in water or apply ointments or butter; this may cause infection. To prevent shock see above. For an airway burn, do not place pillow under the person's head when the person is lying down. This can close the airway. Have a person with a facial burn sit up. Check pulse and breathing to monitor for shock until emergency help arrives. Continued... Chemwatch: 5234-49 Page 4 of 30 Issue Date: 07/03/2020 Version No: 5.1.8.1 DURAM ROCKTUFF (BLACK, DARK GREY, LIGHT GREY, YELLOW) Print Date: 22/06/2021 If fumes or combustion products are inhaled remove from contaminated area. Lay patient down. Keep warm and rested. Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures.